Used Pipe Mill Supplier
Influence of the defects of the welded pipe blank of the high frequency welded pipe machine on the quality of the welded pipe (9)
- Sort：Information
- Auth:
- Source:
- Release time：2022-11-10 11:30
- Pvs：
【概要描述】If the high frequency welded pipe machine refers to the chemical composition and mechanical properties of welded tube blanks that require certain inspection methods to be known as invisible defects; then, those defects that can be seen only by vision are called tube blanks. Overt defect.
Influence of the defects of the welded pipe blank of the high frequency welded pipe machine on the quality of the welded pipe (9)
【概要描述】If the high frequency welded pipe machine refers to the chemical composition and mechanical properties of welded tube blanks that require certain inspection methods to be known as invisible defects; then, those defects that can be seen only by vision are called tube blanks. Overt defect.
- Sort：Information
- Auth:
- Source:
- Release time：2022-11-10 11:30
- Pvs：
Detail
If the high frequency welded pipe machine refers to the chemical composition and mechanical properties of welded tube blanks that require certain inspection methods to be known as invisible defects; then, those defects that can be seen only by vision are called tube blanks. Overt defect.
The dominant defects of the welded tube blank of the high frequency welded pipe machine generally include cracked edges, broken edges, sawtooth, pitting, scratches, roll marks, dark spots, edge burrs, sickle bends, wrinkles, waves, edge warping, and points. Layers, warped skins, pinholes, sticky rolls, soft spots, rust, oxide layers, towers, loose rolls, etc. Let me introduce you to the causes of cracked edges and the impact of cracked edge billets on welded pipes.
Alice
The peeling skin refers to the iron sheet on the surface of the tube blank. One end is connected to the tube blank substrate, and the other end is separated from the substrate. The difference between it and delamination is that the local warping is obvious, but the formation mechanism is similar to that of delamination. It belongs to the extreme form of partial delamination, and it is located on the surface and is broken.
The effects of warping on the production of welded pipes are as follows:
(1) It is easy to damage the induction coil or the contact, and the magnetic rod will run out, forcing the machine to stop.
(2) The pressure-bearing capacity of the pipe is reduced.
(3) The sensory organ is not good, and it does not meet the requirements of the surface quality of the welded pipe.
Regarding the effect of the welded pipe blank defect of the high frequency welded pipe machine (9) on the quality of the welded pipe, I hope it can be helpful to you.
关键词：
More News
Still worrying about production capacity? 140 refurbished welded pipe production line to relieve worries!
Time of issue : 2025-03-19
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Why did you choose 60 used cold bending machine
Time of issue : 2025-03-11
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Why did you choose this refurbished 140 to 165 second-hand welded pipe equipment?
Time of issue : 2025-03-07
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
The Role of Roller Conveyor Motors in Used Pipe Welding Machines
Time of issue : 2025-03-05
Used pipe welding machines refer to welding equipment that has been previously used and is resold, typically for producing welded steel pipes. In used pipe welding machines, the roller conveyor motor is a critical component whose role runs through the entire production process, directly affecting the equipment's operational efficiency, processing accuracy, and product quality. Below is an analysis of the main functions and importance of roller conveyor motors in used pipe welding machines.
1. Transporting Pipe Materials
The primary function of the roller conveyor motor is to drive the rollers, transporting pipe materials from one process to the next. During pipe welding production, the pipe material needs to go through multiple stages, including uncoiling, forming, welding, cooling, sizing, and cutting. The roller conveyor motor ensures smooth and continuous movement of the pipe material by controlling the rotation of the rollers, preventing jams or deviations.
2. Ensuring Production Continuity
In used pipe welding machines, the stable operation of the roller conveyor motor is key to ensuring production continuity. If the motor fails, it may cause interruptions in material transportation, affecting the efficiency of the entire production line. Therefore, the reliability and durability of the roller conveyor motor are particularly important, especially in used equipment, where regular maintenance and care are essential.
3. Controlling Pipe Material Speed
The roller conveyor motor controls the speed of the rollers through a speed regulation device, thereby adjusting the transportation speed of the pipe material. During the welding process, the transportation speed of the pipe material must match the welding speed to ensure weld quality. The precise control capability of the roller conveyor motor directly affects welding results and production efficiency.
4. Improving Processing Accuracy
The smooth operation of the roller conveyor motor helps reduce vibrations and deviations during material transportation, thereby improving processing accuracy. In used pipe welding machines, the performance of the roller conveyor motor may decline due to equipment aging, so regular inspection and maintenance are necessary to ensure its operational precision.
5. Adapting to Multiple Specifications
Roller conveyor motors are typically equipped with speed regulation functions, allowing them to adapt to the production of pipes with different specifications. For example, when producing thin-walled and thick-walled pipes, the motor needs to adjust its speed to meet different processing requirements. This flexibility enables used pipe welding machines to fulfill diverse production needs.
6. Energy Saving and Efficiency
Modern roller conveyor motors are often designed for high efficiency and energy savings, reducing energy consumption and improving production efficiency. In used pipe welding machines, if the motor is aging or its performance declines, energy consumption may increase. Therefore, it is recommended to upgrade or replace the motor to enhance the overall energy efficiency of the equipment.
7. Reducing Equipment Wear
The smooth operation of the roller conveyor motor can reduce wear on other components of the equipment. For instance, if the motor operates unstably, it may cause premature wear on rollers, bearings, and other parts, increasing maintenance costs. Thus, in used pipe welding machines, the condition of the roller conveyor motor directly impacts the equipment's service life.
8. Automation Control
In modern pipe welding production lines, roller conveyor motors are often integrated with PLCs (Programmable Logic Controllers) and sensors to achieve automated control. In used pipe welding machines, if the roller conveyor motor supports automation functions, it can significantly improve production efficiency and product quality.
9. Safety
The stable operation of the roller conveyor motor is also closely related to production safety. If the motor fails, it may lead to material pile-ups, equipment jams, or even injuries. Therefore, in used pipe welding machines, the safety of the roller conveyor motor cannot be overlooked.
10. Maintenance and Care
In used pipe welding machines, the maintenance of the roller conveyor motor is particularly important. Since the equipment has been used for a certain period, the motor's performance may have declined. Regularly checking the motor's insulation, lubrication, and operating temperature can extend its service life and ensure stable equipment operation.
Conclusion
The roller conveyor motor plays a vital role in used pipe welding machines, with its functions covering material transportation, speed control, processing accuracy, energy efficiency, and more. For used equipment, the condition of the roller conveyor motor directly affects the overall performance and production efficiency of the equipment. Therefore,
Used pipe welding machines refer to welding equipment that has been previously used and is resold, typically for producing welded steel pipes. In used pipe welding machines, the roller conveyor motor is a critical component whose role runs through the entire production process, directly affecting the equipment's operational efficiency, processing accuracy, and product quality. Below is an analysis of the main functions and importance of roller conveyor motors in used pipe welding machines.
1. Transporting Pipe Materials
The primary function of the roller conveyor motor is to drive the rollers, transporting pipe materials from one process to the next. During pipe welding production, the pipe material needs to go through multiple stages, including uncoiling, forming, welding, cooling, sizing, and cutting. The roller conveyor motor ensures smooth and continuous movement of the pipe material by controlling the rotation of the rollers, preventing jams or deviations.
2. Ensuring Production Continuity
In used pipe welding machines, the stable operation of the roller conveyor motor is key to ensuring production continuity. If the motor fails, it may cause interruptions in material transportation, affecting the efficiency of the entire production line. Therefore, the reliability and durability of the roller conveyor motor are particularly important, especially in used equipment, where regular maintenance and care are essential.
3. Controlling Pipe Material Speed
The roller conveyor motor controls the speed of the rollers through a speed regulation device, thereby adjusting the transportation speed of the pipe material. During the welding process, the transportation speed of the pipe material must match the welding speed to ensure weld quality. The precise control capability of the roller conveyor motor directly affects welding results and production efficiency.
4. Improving Processing Accuracy
The smooth operation of the roller conveyor motor helps reduce vibrations and deviations during material transportation, thereby improving processing accuracy. In used pipe welding machines, the performance of the roller conveyor motor may decline due to equipment aging, so regular inspection and maintenance are necessary to ensure its operational precision.
5. Adapting to Multiple Specifications
Roller conveyor motors are typically equipped with speed regulation functions, allowing them to adapt to the production of pipes with different specifications. For example, when producing thin-walled and thick-walled pipes, the motor needs to adjust its speed to meet different processing requirements. This flexibility enables used pipe welding machines to fulfill diverse production needs.
6. Energy Saving and Efficiency
Modern roller conveyor motors are often designed for high efficiency and energy savings, reducing energy consumption and improving production efficiency. In used pipe welding machines, if the motor is aging or its performance declines, energy consumption may increase. Therefore, it is recommended to upgrade or replace the motor to enhance the overall energy efficiency of the equipment.
7. Reducing Equipment Wear
The smooth operation of the roller conveyor motor can reduce wear on other components of the equipment. For instance, if the motor operates unstably, it may cause premature wear on rollers, bearings, and other parts, increasing maintenance costs. Thus, in used pipe welding machines, the condition of the roller conveyor motor directly impacts the equipment's service life.
8. Automation Control
In modern pipe welding production lines, roller conveyor motors are often integrated with PLCs (Programmable Logic Controllers) and sensors to achieve automated control. In used pipe welding machines, if the roller conveyor motor supports automation functions, it can significantly improve production efficiency and product quality.
9. Safety
The stable operation of the roller conveyor motor is also closely related to production safety. If the motor fails, it may lead to material pile-ups, equipment jams, or even injuries. Therefore, in used pipe welding machines, the safety of the roller conveyor motor cannot be overlooked.
10. Maintenance and Care
In used pipe welding machines, the maintenance of the roller conveyor motor is particularly important. Since the equipment has been used for a certain period, the motor's performance may have declined. Regularly checking the motor's insulation, lubrication, and operating temperature can extend its service life and ensure stable equipment operation.
Conclusion
The roller conveyor motor plays a vital role in used pipe welding machines, with its functions covering material transportation, speed control, processing accuracy, energy efficiency, and more. For used equipment, the condition of the roller conveyor motor directly affects the overall performance and production efficiency of the equipment. Therefore,
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
