Used Pipe Mill Supplier
Correct use of impedance device (magnetic rod) in welding of high frequency welded pipe equipment (2)
- Sort：Information
- Auth:
- Source:
- Release time：2023-09-14 11:30
- Pvs：
【概要描述】Usually the use of used high frequency welded pipe equipment consumes a lot of impedors device (magnetic rod). At the same time, when high-frequency induction welding technology is used to produce welded pipes, it is necessary to place impedors device (magnetic rod) in the inner cavity of the welded pipe blank to change the induced current in the pipe blank. Distribution, as shown in Figure 1. Placing the impedors device (magnetic rod) in a suitable position can cause the induced current to concentrate on the fusion surface of the welded pipe, thereby improving the efficiency of induction welding; if the placement of the resistor is not appropriate, it will not only reduce the welding efficiency of the welded pipe, but also Cause product quality problems.
Correct use of impedance device (magnetic rod) in welding of high frequency welded pipe equipment (2)
【概要描述】Usually the use of used high frequency welded pipe equipment consumes a lot of impedors device (magnetic rod). At the same time, when high-frequency induction welding technology is used to produce welded pipes, it is necessary to place impedors device (magnetic rod) in the inner cavity of the welded pipe blank to change the induced current in the pipe blank. Distribution, as shown in Figure 1. Placing the impedors device (magnetic rod) in a suitable position can cause the induced current to concentrate on the fusion surface of the welded pipe, thereby improving the efficiency of induction welding; if the placement of the resistor is not appropriate, it will not only reduce the welding efficiency of the welded pipe, but also Cause product quality problems.
- Sort：Information
- Auth:
- Source:
- Release time：2023-09-14 11:30
- Pvs：
Detail
Usually the use of used high frequency welded pipe equipment consumes a lot of impedors device (magnetic rod). At the same time, when high-frequency induction welding technology is used to produce welded pipes, it is necessary to place impedors device (magnetic rod) in the inner cavity of the welded pipe blank to change the induced current in the pipe blank. Distribution, as shown in Figure 1. Placing the impedors device (magnetic rod) in a suitable position can cause the induced current to concentrate on the fusion surface of the welded pipe, thereby improving the efficiency of induction welding; if the placement of the resistor is not appropriate, it will not only reduce the welding efficiency of the welded pipe, but also Cause product quality problems.
Below we combine some experience in the production process to summarize the installation of the impedors device (magnetic rod) and the related issues that should be paid attention to in the production:
d. Several issues that should be paid attention to in the production process.
1) When installing the impedors device (magnetic rod), the front end should not exceed the center line of the squeeze roller too far, generally controlled between 3~6mm.
2) Do not touch the edge of the tube when adjusting the impedors device (magnetic rod), otherwise it will be easily carried away by the tube, and of course the distance should not be too large.
3) In the process of winding the impedors device (magnetic rod), care should be taken not to wind too thick or too thin. It should be appropriately determined according to the diameter, wall thickness and inner diameter of the steel pipe produced, and water cooling should be ensured in the middle. Clearance, and there are measures to prevent breakage.
4) During the production process, check the position of the impedors device (magnetic rod) and whether it is taken away or broken, and often remove the wire or debris hanging on the impedors device (magnetic rod).
5) In the normal production process, short magnetic bars can be attached to each side of the inductor, which can improve the welding efficiency (there are two functions:
One is to strengthen the proximity effect of the lower tube blank edge of the inductor, reduce its eddy current loss, increase the welding current, and then improve the welding efficiency;
The second is to concentrate the induced current on the upper half of the tube blank, which can reduce the loss of the tube back).
6). In the case of a short magnet bar, part of the short magnet bar can be placed in the tube behind the magnet bar during adjustment to make up for the insufficient length of the short magnet bar.
7). In the normal production adjustment, attention should be paid to the cooling of the impedors device (magnetic rod) to reduce the use temperature of the internal magnetic rod and prolong its service life. If the high temperature exceeds the Curie temperature point (170~340°C), the magnetic rod will lose its magnetism, and the remaining effective magnetic rod will carry more magnetic flux density, which will further deteriorate the impedors device (magnetic rod) and eventually lead to The entire impedors device (magnetic rod) stops working.
In short, the impedors device (magnetic rod) is one of the main components of high-frequency welding (whether it is contact welding or induction welding). Whether the installation position is correct or not plays a key role in increasing the welding speed and improving the welding quality.
关键词：
More News
Evaluation of 76-127 Used Pipe Welding Machine Unit: Performance, Applications and Market Value Analysis
Time of issue : 2025-04-24
With increasing emphasis on cost control and environmental protection in manufacturing, used pipe welding machines have become a popular choice for SMEs due to their cost-effectiveness and sustainability. This article takes the 76-127 model as an example, providing a comprehensive analysis from multiple dimensions including technical parameters, equipment configuration, quality assessment, market advantages and industrial applications.
1. Technical Parameters and Equipment Configuration
The 76-127 used pipe welding machine unit is renowned for its high efficiency and flexibility, with core parameters as follows:
Processing range: Capable of producing square pipes (Φ40-100) and round pipes (Φ50-127) with wall thickness up to 5mm, at a production speed of 60m/min.
Key configurations:
Forming and welding: Includes 7 horizontal rolls and 9 vertical rolls forming unit, paired with 300kW solid-state high-frequency welder to ensure stable weld quality.
Auxiliary systems: Hydraulic uncoiler, shear welder, computer flying saw and Turk's head straightening device to enhance automation.
Process flow: Strip uncoiling→leveling→forming→high-frequency welding→cooling→sizing→cutting, ensuring continuous high-efficiency production.
The modular design simplifies maintenance, and after refurbishment, its performance approaches that of new machines while reducing procurement costs by 40%-60%, making it ideal for budget-conscious enterprises.
2. Key Points for Quality Assessment
According to industry standards, the quality of used pipe welding machines should be comprehensively evaluated from four aspects:
Materials and processes
Material durability: Core components such as rolls and high-frequency welders should be original to ensure corrosion resistance and tensile strength.
Process control: Welding quality directly affects joint strength, requiring precise regulation of high-frequency current's skin effect and proximity effect.
Appearance and performance
Visual inspection: The unit surface should be free of rust and deformation, with no significant wear on molds.
Performance test: Verify production speed, sizing accuracy (e.g. ovality ±0.05mm) and flying saw synchronization through trial operation.
After-sales service
Reputable suppliers like Jinyujie Electromechanical provide installation, spare parts support and technical training to reduce operational risks.
3. Market Advantages and Environmental Value
Cost-effectiveness
The 76-127 model typically costs only 50%-60% of new equipment while being ready for immediate use.
A Zhejiang-based enterprise reported 30% productivity improvement with significantly better ROI.
Sustainability
Refurbishing used equipment reduces resource waste, aligning with green manufacturing trends.
Industry adaptability
Widely used in construction (guardrails, scaffolding), automotive (exhaust pipes) and energy (oil pipelines) sectors, supporting various materials including carbon steel and stainless steel.
4. Maintenance and Risk Control
Routine maintenance
Regular lubrication and inspection of key components to prevent rust and damage.
Operation standards
Operators should receive proper training and wear protective equipment.
Procurement risks
Verify equipment sources and clarify responsibilities through formal agreements.
5. Industry Trends and Selection Recommendations
The domestic used pipe welding machine market grew 25% YoY in 2023, with increasing share of refurbished imported equipment. Selection suggestions:
Match production needs with equipment specifications
Choose reputable suppliers with comprehensive after-sales services
Conclusion
The 76-127 used pipe welding machine unit, with its mature technology, low cost and environmental benefits, has become an optimal choice for manufacturers seeking efficiency improvements. Enterprises should combine quality assessment, maintenance strategies and supplier services to maximize equipment value and promote sustainable development.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
With increasing emphasis on cost control and environmental protection in manufacturing, used pipe welding machines have become a popular choice for SMEs due to their cost-effectiveness and sustainability. This article takes the 76-127 model as an example, providing a comprehensive analysis from multiple dimensions including technical parameters, equipment configuration, quality assessment, market advantages and industrial applications.
1. Technical Parameters and Equipment Configuration
The 76-127 used pipe welding machine unit is renowned for its high efficiency and flexibility, with core parameters as follows:
Processing range: Capable of producing square pipes (Φ40-100) and round pipes (Φ50-127) with wall thickness up to 5mm, at a production speed of 60m/min.
Key configurations:
Forming and welding: Includes 7 horizontal rolls and 9 vertical rolls forming unit, paired with 300kW solid-state high-frequency welder to ensure stable weld quality.
Auxiliary systems: Hydraulic uncoiler, shear welder, computer flying saw and Turk's head straightening device to enhance automation.
Process flow: Strip uncoiling→leveling→forming→high-frequency welding→cooling→sizing→cutting, ensuring continuous high-efficiency production.
The modular design simplifies maintenance, and after refurbishment, its performance approaches that of new machines while reducing procurement costs by 40%-60%, making it ideal for budget-conscious enterprises.
2. Key Points for Quality Assessment
According to industry standards, the quality of used pipe welding machines should be comprehensively evaluated from four aspects:
Materials and processes
Material durability: Core components such as rolls and high-frequency welders should be original to ensure corrosion resistance and tensile strength.
Process control: Welding quality directly affects joint strength, requiring precise regulation of high-frequency current's skin effect and proximity effect.
Appearance and performance
Visual inspection: The unit surface should be free of rust and deformation, with no significant wear on molds.
Performance test: Verify production speed, sizing accuracy (e.g. ovality ±0.05mm) and flying saw synchronization through trial operation.
After-sales service
Reputable suppliers like Jinyujie Electromechanical provide installation, spare parts support and technical training to reduce operational risks.
3. Market Advantages and Environmental Value
Cost-effectiveness
The 76-127 model typically costs only 50%-60% of new equipment while being ready for immediate use.
A Zhejiang-based enterprise reported 30% productivity improvement with significantly better ROI.
Sustainability
Refurbishing used equipment reduces resource waste, aligning with green manufacturing trends.
Industry adaptability
Widely used in construction (guardrails, scaffolding), automotive (exhaust pipes) and energy (oil pipelines) sectors, supporting various materials including carbon steel and stainless steel.
4. Maintenance and Risk Control
Routine maintenance
Regular lubrication and inspection of key components to prevent rust and damage.
Operation standards
Operators should receive proper training and wear protective equipment.
Procurement risks
Verify equipment sources and clarify responsibilities through formal agreements.
5. Industry Trends and Selection Recommendations
The domestic used pipe welding machine market grew 25% YoY in 2023, with increasing share of refurbished imported equipment. Selection suggestions:
Match production needs with equipment specifications
Choose reputable suppliers with comprehensive after-sales services
Conclusion
The 76-127 used pipe welding machine unit, with its mature technology, low cost and environmental benefits, has become an optimal choice for manufacturers seeking efficiency improvements. Enterprises should combine quality assessment, maintenance strategies and supplier services to maximize equipment value and promote sustainable development.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Furuiwo Used 140 Pipe Welding Machine Unit
Time of issue : 2025-04-23
Recently, Furuiwo launched its highly anticipated used pipe welding machine—the 140 model pipe welding unit. With outstanding processing capabilities and significant cost-performance advantages, this equipment has become an ideal choice for small and medium-sized pipe processing enterprises.
Core Performance: Precision and Efficiency for Diverse Needs
The Furuiwo 140 used pipe welding machine emphasizes practicality and stability, with key technical parameters as follows:
Processing Diameter Range: Φ60-159 mm, covering production needs from light-duty pipes to medium industrial pipelines;
Processing Thickness: Supports materials up to 5 mm, suitable for construction and machinery manufacturing;
Processing Speed: 60 meters/minute, significantly improving efficiency while reducing energy consumption.
The unit adopts a modular design for easy maintenance. After comprehensive inspection and upgrades by Furuiwo’s technical team, its performance is close to new machines, yet procurement costs are substantially lower.
Market Advantages: Economic and Environmental Value
Amid intensifying competition in manufacturing, used pipe welding machines are becoming a strategic choice for cost optimization. The Furuiwo 140 model stands out with the following advantages:
Cost Savings: Priced 40%-60% lower than new machines, ideal for budget-conscious SMEs;
Rapid Deployment: Pre-tested and ready for immediate use, shortening production setup time;
Sustainability: Extends equipment lifecycle, aligning with green manufacturing trends.
Wang Qiang, Furuiwo’s Sales Director, stated: “We are committed to providing high-value solutions. This used pipe welding machine not only ensures reliability but also comes with full after-sales support, including a one-year warranty and lifelong technical assistance.”
Applications: Versatility Across Industries
The unit processes carbon steel, stainless steel, and other materials, serving industries such as:
Construction: Production of guardrails and scaffold pipes;
Automotive: Exhaust pipes and chassis components;
Energy: Customized oil and water pipelines.
A Zhejiang-based pipe manufacturer reported: “After purchasing Furuiwo’s used pipe welding machine, our productivity increased by 30%, with costs halved compared to new equipment—ROI far exceeded expectations.”
Industry Outlook: Growing Demand for Used Equipment
As manufacturing upgrades, the used industrial equipment market is booming. Industry reports indicate a 25% year-on-year growth in China’s used pipe welding machine transactions in 2023, with refurbished imported brands gaining traction. Furuiwo, leveraging technical expertise and channel advantages, has emerged as a leader in this sector.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Recently, Furuiwo launched its highly anticipated used pipe welding machine—the 140 model pipe welding unit. With outstanding processing capabilities and significant cost-performance advantages, this equipment has become an ideal choice for small and medium-sized pipe processing enterprises.
Core Performance: Precision and Efficiency for Diverse Needs
The Furuiwo 140 used pipe welding machine emphasizes practicality and stability, with key technical parameters as follows:
Processing Diameter Range: Φ60-159 mm, covering production needs from light-duty pipes to medium industrial pipelines;
Processing Thickness: Supports materials up to 5 mm, suitable for construction and machinery manufacturing;
Processing Speed: 60 meters/minute, significantly improving efficiency while reducing energy consumption.
The unit adopts a modular design for easy maintenance. After comprehensive inspection and upgrades by Furuiwo’s technical team, its performance is close to new machines, yet procurement costs are substantially lower.
Market Advantages: Economic and Environmental Value
Amid intensifying competition in manufacturing, used pipe welding machines are becoming a strategic choice for cost optimization. The Furuiwo 140 model stands out with the following advantages:
Cost Savings: Priced 40%-60% lower than new machines, ideal for budget-conscious SMEs;
Rapid Deployment: Pre-tested and ready for immediate use, shortening production setup time;
Sustainability: Extends equipment lifecycle, aligning with green manufacturing trends.
Wang Qiang, Furuiwo’s Sales Director, stated: “We are committed to providing high-value solutions. This used pipe welding machine not only ensures reliability but also comes with full after-sales support, including a one-year warranty and lifelong technical assistance.”
Applications: Versatility Across Industries
The unit processes carbon steel, stainless steel, and other materials, serving industries such as:
Construction: Production of guardrails and scaffold pipes;
Automotive: Exhaust pipes and chassis components;
Energy: Customized oil and water pipelines.
A Zhejiang-based pipe manufacturer reported: “After purchasing Furuiwo’s used pipe welding machine, our productivity increased by 30%, with costs halved compared to new equipment—ROI far exceeded expectations.”
Industry Outlook: Growing Demand for Used Equipment
As manufacturing upgrades, the used industrial equipment market is booming. Industry reports indicate a 25% year-on-year growth in China’s used pipe welding machine transactions in 2023, with refurbished imported brands gaining traction. Furuiwo, leveraging technical expertise and channel advantages, has emerged as a leader in this sector.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Small cost replacement of 140 second-hand welded pipe equipment
Time of issue : 2025-03-21
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Still worrying about production capacity? 140 refurbished welded pipe production line to relieve worries!
Time of issue : 2025-03-19
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
