Used Pipe Mill Supplier
Analysis of common faults of used welded pipe equipments sizing machine (3)
- Sort：Information
- Auth:
- Source:
- Release time：2023-10-05 11:30
- Pvs：
【概要描述】In contrast, the failure rate of the sizing machine is the lowest, and it is easier to deal with. The common production accidents of the used welded pipe equipments sizing machine are as follows: ① Scratches. ②Drilling pipe. ③The pipe is not round.
Analysis of common faults of used welded pipe equipments sizing machine (3)
【概要描述】In contrast, the failure rate of the sizing machine is the lowest, and it is easier to deal with. The common production accidents of the used welded pipe equipments sizing machine are as follows: ① Scratches. ②Drilling pipe. ③The pipe is not round.
- Sort：Information
- Auth:
- Source:
- Release time：2023-10-05 11:30
- Pvs：
Detail
In contrast, the failure rate of the sizing machine is the lowest, and it is easier to deal with. The common production accidents of the used welded pipe equipments sizing machine are as follows: ① Scratches. ②Drilling pipe. ③The pipe is not round.
In order to let everyone understand the common faults of used welded pipe equipments sizing machines, we analyze the common faults of used welded pipe equipments sizing machines on this issue - the pipe is not round.
The tube is not round
The shapes of non-circular tubes are generally oval, ribbed and gourd-shaped.
①oval
The oval tube is completely caused by improper adjustment of the sizing hole, especially after the sizing hole has a certain wear, unreasonable adjustment will make the pipe more likely to appear elliptical. In general, elliptical tubes that occur on the transverse and longitudinal axes of the tube section (Fig. 29),
It is caused by the unreasonable matching of the pressure between the flat roll and the vertical roll. The pressure can be appropriately increased in the long axis direction of the elliptical tube and reduced in the short axis direction.
If the axis of the elliptical tube has an inclined angle (Fig. 30),
It should be adjusted according to the actual situation. For example, when the elliptical tube caused by the flat roll and the vertical roll is in the same direction, the steering adjustment method can be used. By pressing down one side of the flat roll, the tube is rotated in a certain direction, and then the pressure of the vertical roll and the pressure of the vertical roll can be increased or decreased. adjust. This kind of elliptical tube is a typical example that is difficult to adjust. If the steering method cannot solve the problem, the method of hole type transposition can also be carried out. That is to say, remove the two vertical rollers and change the position, so that the elliptical tube from the flat roller hole forms an opposite direction, and then adjust the increase and decrease force. Or it is also possible to change the direction of the pass pattern of the upper flat roll, so that the worn pass pattern of the flat roll can be recombined. The direction of the long axis of the pass of the lower roll opposite to the axial direction. Of course, this is a treatment that is only used when other methods fail to solve the elliptical tube.
②ribbed round tube
The ribbed round tube refers to a certain part of the round surface of the tube with a protruding rib shape (Figure 31),
We call it a prismatic tube. Generally, there are the following reasons for the production of this kind of tube.
(1) Poor forming deformation
This situation should not occur in the early stage of the use of the hole pattern. After the middle and later stages, the hole pattern is sometimes used unreasonably, and the hole pattern arc surface has irregular deformity and wear. This undesirable deformation produces prismatic tubes. When the machine is stopped for inspection, we can touch the outer arc surface of the deformed tube blank one by one with the palm of our hand, and we can feel whether the tube blank is abnormally deformed.
(2) Sizing hole wear
The wear of the sizing hole is one of the most important reasons for the round pipe caused by the wear of the sizing hole, especially when some slight peach-shaped pipes are often produced, but cannot be solved in time, the A certain part of the sizing hole type will be specially worn, so that a concave arc surface will be formed in this part, resulting in the appearance of a ribbed round tube. This requires us to deal with and solve some bad forming deformation problems and the production of peach-shaped pipes as soon as possible, and often check the wear of the sizing hole, and replace it in time when it is found that the arc of the hole has irregular wear.
(3) Uneven force on the straightening roller.
There are basically two types of straightening roller structure, one is a four-roller structure (Figure 32), and the other is an eight-roller structure (Figure 33).
The cause of the angular round tube is generally caused by the straightening roller of the eight-roll structure. When the pipe is straightened, the overall adjustment should be carried out according to the adjustment process requirements, so that the contact force between each roller and the pipe surface is very light. If the single-roller adjustment is performed, the circular shape formed by every four rolls will be destroyed, and under the pressure of the single-roller, a strange angular surface will appear on the surface of the tube.
③gourd pipe
Sometimes when we check the outer diameter of the pipe, we will find that the diameter of the pipe is thick and thin, and the thickness error can be up to about 0.3 mm, commonly known as the gourd pipe. This is mainly caused by the following two situations.
(1) Bearing damage
When the flat roll bearing is slightly damaged, with the rotation of the roll, the residual dead point of the jam may sometimes occur. When the pressure of the roll changes and cannot be constant, the outer diameter of the tube is controlled. The same changes will occur, and the tube will have a cycle-unstable gourd-like size. But as long as the bearing rotates stably, even when the bearing is damaged, it will not bring too much adverse effect on the outer diameter of the tube.
(2) Flat roll shaft bending
Bending of the flat roller shaft Due to special reasons such as the drill pipe, after the flat roller shaft is damaged by a large external force, the bending amount of the shaft exceeds the limit of its elastic deformation and cannot be restored, at the position of the hole pattern, between the two shafts The distance has changed (Figure 34).
With the rotation of the rolls, the distance between the axes also changes, so that the diameter of the pipe also appears larger and smaller. And this kind of gourd pipe is periodically stable and equidistant. When solving this problem, we first check the radial runout of the roll, from which we can judge whether both the upper and lower shafts are bent, or only one shaft is bent. If both shafts are bent, one of the shafts can be rotated 180° before installation and use (Figure 35)
In this way, the same inter-axis distance between the two axes can always be maintained when the two axes are rotated. If a shaft is bent, it is necessary to replace a new shaft, or reduce the pressure of the flat roller on the tube.
If the used welded pipe equipments has common faults in the sizing machine, and the pipe is not round, pay attention to these three pipe shapes ①Ellipse. ② The edge is round. ③ Gourd shape. Hope to be of some help to you. Our company has many brands and wide resources, there is always one suitable for you. You only need to inform us of your pipe manufacturing needs, and our company will provide you with used welded pipe equipments that really suits your needs. Welcome new and old customers to come to consult and order.
关键词：
More News
A thorough evaluation before purchasing a used pipe welding machine
Time of issue : 2025-02-13
1.Equipment condition check
Appearance inspection: Check whether the equipment has obvious damage, rust or deformation.
Core component inspection: Focus on inspecting key components such as welding joints, transmission systems, and electrical systems to ensure that there is no serious wear or failure.
Operation test: Conduct trial operation to observe whether the equipment runs smoothly and whether the welding quality meets the requirements.
2.Equipment history
Service life: Understand the use time of the equipment, usually the longer the service life, the higher the risk of failure.
Maintenance records: Check the maintenance and repair records of the equipment to determine whether it is well maintained.
Working environment: Understand the working environment before the equipment, harsh environment may lead to increased equipment wear.
3.Technical parameters
Production capacity: Confirm whether the production capacity of the equipment meets the demand, including welding speed, pipe diameter range, etc.
Accuracy requirements: Check the welding accuracy of the equipment to ensure that it meets the production standard.
Compatibility: Confirm whether the equipment can be adapted to existing production lines or raw materials.
4.Brand and model
Brand reputation: Choose a well-known brand, usually the quality and after-sales service is more guaranteed.
Model suitability: Ensure that the model is suitable for current production needs and avoid insufficient or excessive functions.
5.Price evaluation
Market conditions: Understand the market price of the same type of equipment, to avoid too high or too low prices.
Cost performance: Considering the equipment condition, performance and price, choose cost-effective equipment.
6.After-sales service
Warranty Period: Confirm whether the equipment is under warranty, or whether the warranty can be extended.
Technical Support: Find out if the supplier provides technical support or repair services.
Accessories supply: Confirm that equipment accessories are easy to obtain to avoid the risk of stopping production.
7.Legal and Compliance
Equipment legitimacy: Ensure that the source of equipment is legitimate, avoid buying stolen goods or illegal equipment.
Compliance: Verify that the equipment meets local safety standards and environmental requirements.
8.Supplier reputation
Supplier background: Choose suppliers with good reputation to reduce the risk of purchase.
User Reviews: View other users' reviews of suppliers to understand their service quality and equipment condition.
9.Transportation and installation
Transportation costs: Consider the transportation costs of equipment, especially large equipment.
Installation and commissioning: Confirm whether the supplier provides installation and commissioning services to ensure the normal use of the equipment.
10.Contract Terms
Clear terms: Ensure that key information such as equipment condition, price, warranty period, etc. is clear in the contract.
Return Policy: Understand the return policy to avoid the inability to return if the equipment does not meet the requirements.
Summary
The purchase of second-hand pipe welding machine needs to consider the equipment status, history, technical parameters, price, after-sales service and other factors to ensure that the equipment meets the production demand and is cost-effective.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Equipment condition check
Appearance inspection: Check whether the equipment has obvious damage, rust or deformation.
Core component inspection: Focus on inspecting key components such as welding joints, transmission systems, and electrical systems to ensure that there is no serious wear or failure.
Operation test: Conduct trial operation to observe whether the equipment runs smoothly and whether the welding quality meets the requirements.
2.Equipment history
Service life: Understand the use time of the equipment, usually the longer the service life, the higher the risk of failure.
Maintenance records: Check the maintenance and repair records of the equipment to determine whether it is well maintained.
Working environment: Understand the working environment before the equipment, harsh environment may lead to increased equipment wear.
3.Technical parameters
Production capacity: Confirm whether the production capacity of the equipment meets the demand, including welding speed, pipe diameter range, etc.
Accuracy requirements: Check the welding accuracy of the equipment to ensure that it meets the production standard.
Compatibility: Confirm whether the equipment can be adapted to existing production lines or raw materials.
4.Brand and model
Brand reputation: Choose a well-known brand, usually the quality and after-sales service is more guaranteed.
Model suitability: Ensure that the model is suitable for current production needs and avoid insufficient or excessive functions.
5.Price evaluation
Market conditions: Understand the market price of the same type of equipment, to avoid too high or too low prices.
Cost performance: Considering the equipment condition, performance and price, choose cost-effective equipment.
6.After-sales service
Warranty Period: Confirm whether the equipment is under warranty, or whether the warranty can be extended.
Technical Support: Find out if the supplier provides technical support or repair services.
Accessories supply: Confirm that equipment accessories are easy to obtain to avoid the risk of stopping production.
7.Legal and Compliance
Equipment legitimacy: Ensure that the source of equipment is legitimate, avoid buying stolen goods or illegal equipment.
Compliance: Verify that the equipment meets local safety standards and environmental requirements.
8.Supplier reputation
Supplier background: Choose suppliers with good reputation to reduce the risk of purchase.
User Reviews: View other users' reviews of suppliers to understand their service quality and equipment condition.
9.Transportation and installation
Transportation costs: Consider the transportation costs of equipment, especially large equipment.
Installation and commissioning: Confirm whether the supplier provides installation and commissioning services to ensure the normal use of the equipment.
10.Contract Terms
Clear terms: Ensure that key information such as equipment condition, price, warranty period, etc. is clear in the contract.
Return Policy: Understand the return policy to avoid the inability to return if the equipment does not meet the requirements.
Summary
The purchase of second-hand pipe welding machine needs to consider the equipment status, history, technical parameters, price, after-sales service and other factors to ensure that the equipment meets the production demand and is cost-effective.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
The connection between pipe welding mechanism and furniture industry,
Time of issue : 2025-02-12
1. Material basis: Welded pipe as the skeleton material of furniture
Structural support: Steel pipes made of welded pipes are often used in the frame structure of furniture, such as chair legs, table supports, bed frames, bookshelves, etc. Its high strength and stability can withstand large loads.
Lightweight design: Compared with solid steel, welded pipe is lightweight and low cost, suitable for furniture requiring portability or simple design (such as outdoor folding tables and chairs).
2. Design flexibility
Diversified modeling: Welded pipes can be processed into complex shapes through bending, cutting, welding and other processes to meet the curve or geometric design needs of modern furniture (such as streamlined bar chairs, creative shelves).
Industrial style: The exposed metal welded pipe structure is the iconic element of industrial furniture, often used in cafes, LOFT Spaces and other scenes.
3. Functionality and durability
Outdoor furniture: Galvanized welded pipes or steel pipes treated with anti-rust are often used in outdoor furniture (such as garden tables and chairs, balcony guardrail), with strong weather resistance.
Load-bearing requirements: The high strength characteristics of welded pipes are suitable for the production of storage shelves, shelves and other furniture requiring high load-bearing.
4. Production process coordination
Mass production: The efficient production mode of welded pipe mechanism is matched with the large-scale demand of furniture manufacturing, reducing raw material costs.
Customized processing: Furniture factories can customize welded pipes of different specifications (such as diameter and wall thickness) according to design requirements to improve product adaptability.
5. Environmental Protection and Sustainability
Material recycling: Steel can be recycled, in line with the design concept of environmentally friendly furniture.
Surface treatment: Spraying, painting and other processes can improve the beauty and durability of welded pipe furniture, while reducing the environmental burden.
6. Market trends
Modular furniture: The standardized interface of welded pipe structure is easy to assemble and disassemble, catering to the popular trend of modular furniture.
Cross-border combination: Welded pipes are often combined with wood, glass, plastic and other materials to create a mixed-match style (such as metal + wood dining tables).
Typical Application Case
Office furniture: Steel desk bracket, conference chair frame.
Home Decoration: Metal bookshelf, coat rack, lamp stand.
Public Facilities: Park benches, shopping mall display shelves.
Summary
The welded pipe mechanism provides the furniture industry with an economical, durable and flexible material solution that drives innovation in the function, aesthetics and sustainability of modern furniture. Its combination with furniture is not only an extension of industrial technology, but also an expansion of design language.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1. Material basis: Welded pipe as the skeleton material of furniture
Structural support: Steel pipes made of welded pipes are often used in the frame structure of furniture, such as chair legs, table supports, bed frames, bookshelves, etc. Its high strength and stability can withstand large loads.
Lightweight design: Compared with solid steel, welded pipe is lightweight and low cost, suitable for furniture requiring portability or simple design (such as outdoor folding tables and chairs).
2. Design flexibility
Diversified modeling: Welded pipes can be processed into complex shapes through bending, cutting, welding and other processes to meet the curve or geometric design needs of modern furniture (such as streamlined bar chairs, creative shelves).
Industrial style: The exposed metal welded pipe structure is the iconic element of industrial furniture, often used in cafes, LOFT Spaces and other scenes.
3. Functionality and durability
Outdoor furniture: Galvanized welded pipes or steel pipes treated with anti-rust are often used in outdoor furniture (such as garden tables and chairs, balcony guardrail), with strong weather resistance.
Load-bearing requirements: The high strength characteristics of welded pipes are suitable for the production of storage shelves, shelves and other furniture requiring high load-bearing.
4. Production process coordination
Mass production: The efficient production mode of welded pipe mechanism is matched with the large-scale demand of furniture manufacturing, reducing raw material costs.
Customized processing: Furniture factories can customize welded pipes of different specifications (such as diameter and wall thickness) according to design requirements to improve product adaptability.
5. Environmental Protection and Sustainability
Material recycling: Steel can be recycled, in line with the design concept of environmentally friendly furniture.
Surface treatment: Spraying, painting and other processes can improve the beauty and durability of welded pipe furniture, while reducing the environmental burden.
6. Market trends
Modular furniture: The standardized interface of welded pipe structure is easy to assemble and disassemble, catering to the popular trend of modular furniture.
Cross-border combination: Welded pipes are often combined with wood, glass, plastic and other materials to create a mixed-match style (such as metal + wood dining tables).
Typical Application Case
Office furniture: Steel desk bracket, conference chair frame.
Home Decoration: Metal bookshelf, coat rack, lamp stand.
Public Facilities: Park benches, shopping mall display shelves.
Summary
The welded pipe mechanism provides the furniture industry with an economical, durable and flexible material solution that drives innovation in the function, aesthetics and sustainability of modern furniture. Its combination with furniture is not only an extension of industrial technology, but also an expansion of design language.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Application of high precision steel pipe produced by pipe welding machine in modern industry
Time of issue : 2025-02-11
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
The relationship between pipe welding machine and automobile frame manufacturing
Time of issue : 2025-02-08
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
