Adjusting welded tube forming on used roll forming machine
- Sort:Information
- Auth:
- Source:
- Release time:2023-04-03 11:30
- Pvs:
【概要描述】Forming adjustment is the basis for used roll forming machines to adjust welded pipes; it is recognized by the industry that welded pipe adjustment is an art, among which, forming adjustment is the pearl in the art palace. Some people can't find the essentials in their entire life. It is not an exaggeration to describe the adjustment of welded pipes as full of mystery and impermanence. This art is concentrated in that the adjustment process and results vary from person to person, unit to crew, material to material, and even to environment. Nonetheless, there are some common basic principles, basic operation methods and basic requirements for molding adjustment.
Adjusting welded tube forming on used roll forming machine
【概要描述】Forming adjustment is the basis for used roll forming machines to adjust welded pipes; it is recognized by the industry that welded pipe adjustment is an art, among which, forming adjustment is the pearl in the art palace. Some people can't find the essentials in their entire life. It is not an exaggeration to describe the adjustment of welded pipes as full of mystery and impermanence. This art is concentrated in that the adjustment process and results vary from person to person, unit to crew, material to material, and even to environment. Nonetheless, there are some common basic principles, basic operation methods and basic requirements for molding adjustment.
- Sort:Information
- Auth:
- Source:
- Release time:2023-04-03 11:30
- Pvs:
Forming adjustment is the basis for used roll forming machines to adjust welded pipes; it is recognized by the industry that welded pipe adjustment is an art, among which, forming adjustment is the pearl in the art palace. Some people can't find the essentials in their entire life. It is not an exaggeration to describe the adjustment of welded pipes as full of mystery and impermanence. This art is concentrated in that the adjustment process and results vary from person to person, unit to crew, material to material, and even to environment. Nonetheless, there are some common basic principles, basic operation methods and basic requirements for molding adjustment.
Basic principles of molding adjustment
Horizontal and vertical principle: This is the first principle of forming adjustment. Hengping has three requirements:
(1) The upper and lower flat roller shafts should be level with the horizontal plane, and one end should not be higher than the other;
(2) Make sure that the two axes are parallel and cannot be inclined;
(3) Not only should it be parallel when it is not loaded, but it should be parallel when there is a load.
Vertical mainly requires vertical rollers to be vertical to the working table of the welded pipe unit, including horizontal and vertical directions. The horizontal direction is related to the force of the tube blank, and the vertical direction is related to the stable operation of the tube blank.
According to the principle of calibrating rolls on the rolling line, there are two connotations:
(1) The height of the lower roll and vertical roll must be corrected according to the rolling bottom line, so as to ensure that the pass of the lower roll and the pass of the vertical roll are consistent with the elevation of the rolling bottom line;
(2) The symmetry of the forming bottom roll and the vertical roll must be checked according to the rolling center line. Many problems and defects in the production of welded pipes are closely related to the misalignment of the bottom roll and the deviation of the vertical roll from the rolling center line.
(3) The principle of clear division of labor for vertical and horizontal rollers. The forming flat roll is responsible for power transmission and the main lateral deformation tasks; the vertical roll is mainly responsible for controlling the springback of the tube blank after it leaves the flat roll pass, and is responsible for guiding the forming tube blank into the next flat roll pass smoothly. From the perspective of the development trend of forming theory, the forming function of the forming vertical roll should be gradually weakened, and the control function and import function of the forming vertical roll to the edge of the forming tube blank should be further strengthened by improving the design of the forming vertical roll pass.
In addition, excessive reliance on vertical roll forming will inevitably increase the rolling resistance, which may lead to unstable operation of the formed tube blank, resulting in setbacks and a series of subsequent adverse consequences.
(4) Equipment accuracy guarantee. This is the basic premise to ensure the smooth progress of the molding adjustment and the lasting results of the molding adjustment. It can be said with certainty that it is impossible to produce high-quality and high-precision welded pipes with a "shaking and swinging tail" welded pipe unit.
(5) The principle of timely curing of adjustment results. It means that after the forming adjustment action is completed and the trial operation is normal, the adjusted part should be tightened accordingly to prevent the thread from loosening again and the position changing again, which will lead to the failure of all previous efforts.
(6) The principle of invalid reset. Forming adjustment in welded pipe production involves pass design, tube blank performance, geometric dimensions, equipment accuracy, as well as commissioners' operating habits, experience status, and human-machine mutual recognition. There are still many aspects that belong to the category of silent technology, which is comprehensible and inexpressible, and still cannot be quantitatively manipulated and "normalized", which is a typical operation with more experience than theory. Therefore, the trial and error method is the most commonly used debugging method in the adjustment and forming process of the used roll forming machine. When an adjustment measure is implemented, if the expected result is not obtained, or the opposite result is obtained, it means that the measure is not correct, and the forming state must be restored to the original state in time. Otherwise, the small problem will be turned into a big problem, and the more it is adjusted, the more chaotic it will be, causing corresponding confusion in the normal position.
(7) The principle of the lesser of two evils. Welded pipe adjustment should strive for excellence as much as possible, but when there is a dilemma, it is necessary to weigh the pros and cons and seek the best from the bad.
(8) Systematic principles. It means that when adjusting the forming, it is necessary to consider the possible influence on the welding part and the sizing part; or conversely, consider the influence of the welding section and the sizing section on the forming. For example, excessive consumption of forming allowance will inevitably lead to small sizing allowance under the premise of constant welding allowance, which will increase the difficulty of sizing adjustment.
In summary, adjusting the welded pipe forming of the used roll forming machines is a complex system engineering. Only by following these basic adjustment principles can we avoid detours and debug qualified pipe products. These basic principles are not only suitable for forming adjustment, but also have a guiding role for welding adjustment and sizing adjustment.
More News

Time of issue : 2025-02-11
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-02-08
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-02-07
89 The working principle of the pipe welding machine 89 The pipe welding machine uncoils the steel strip, feeds and welds it into a round steel pipe, and then cools, straightens and cuts the steel pipe to the required length. The main steps include:
1. Uncoiling: Unroll the steel strip from the drum and level it through the straightener.
2. Forming: The steel strip is rolled into a tube shape through a series of roller wheels.
3. Welding: high frequency current is used to heat the joint of the steel strip, so as to weld the steel pipe.
4. Cooling: The welded steel pipe is cooled by cooling equipment.
5. Straightening and cutting: Finally, straighten and cut the steel pipe to the required length.
The main steel pipe used in the highway fence needs to have a certain strength and impact resistance, but also corrosion resistance. Specific features include:
1. High strength: the steel pipe must be able to withstand the impact to ensure the safety of the highway.
2. Corrosion resistance: steel pipes are usually galvanized to enhance their corrosion resistance and adapt to harsh outdoor environments.
3. Standard size: The steel pipe produced generally has strict size requirements to ensure the stability of the fixed connection of each fence.
The steel pipe produced by the 89 pipe welding machine plays a skeleton role in the highway fence, and its application is reflected in:
1. Guardrail: installed on both sides of the highway or in the middle, to prevent the vehicle from losing control of the road, to protect the safety of the driver.
2. Isolation belt: Set isolation belts between lanes in different directions to prevent vehicles from crossing lanes and reduce the incidence of accidents.
3. Sound barrier: The use of steel pipe frame to support the sound barrier plate to reduce the impact of road noise on the surrounding environment.
In short, the 89 pipe welding machine plays a key role in the production of steel pipes for highway fences, ensuring the stability, durability and safety of the fences, thus providing a reliable guarantee for the safe operation of the highways.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
89 The working principle of the pipe welding machine 89 The pipe welding machine uncoils the steel strip, feeds and welds it into a round steel pipe, and then cools, straightens and cuts the steel pipe to the required length. The main steps include:
1. Uncoiling: Unroll the steel strip from the drum and level it through the straightener.
2. Forming: The steel strip is rolled into a tube shape through a series of roller wheels.
3. Welding: high frequency current is used to heat the joint of the steel strip, so as to weld the steel pipe.
4. Cooling: The welded steel pipe is cooled by cooling equipment.
5. Straightening and cutting: Finally, straighten and cut the steel pipe to the required length.
The main steel pipe used in the highway fence needs to have a certain strength and impact resistance, but also corrosion resistance. Specific features include:
1. High strength: the steel pipe must be able to withstand the impact to ensure the safety of the highway.
2. Corrosion resistance: steel pipes are usually galvanized to enhance their corrosion resistance and adapt to harsh outdoor environments.
3. Standard size: The steel pipe produced generally has strict size requirements to ensure the stability of the fixed connection of each fence.
The steel pipe produced by the 89 pipe welding machine plays a skeleton role in the highway fence, and its application is reflected in:
1. Guardrail: installed on both sides of the highway or in the middle, to prevent the vehicle from losing control of the road, to protect the safety of the driver.
2. Isolation belt: Set isolation belts between lanes in different directions to prevent vehicles from crossing lanes and reduce the incidence of accidents.
3. Sound barrier: The use of steel pipe frame to support the sound barrier plate to reduce the impact of road noise on the surrounding environment.
In short, the 89 pipe welding machine plays a key role in the production of steel pipes for highway fences, ensuring the stability, durability and safety of the fences, thus providing a reliable guarantee for the safe operation of the highways.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-01-23
1.Supply channels:
Online marketplaces: For example, Taobao, Alibaba, Jingdong and other platforms can search and find used equipment.
Professional used equipment market: Some areas have a special used equipment market, you can view the equipment situation on the spot.
Industry exhibitions: Participate in machinery, manufacturing related exhibitions, sometimes you can find suppliers to provide second-hand equipment opportunities.
Peers and recommendations: Ask peers and friends in the industry to obtain reliable equipment and supplier information.
2.Selection criteria:
Equipment condition: Carefully check the service life, maintenance records and running status of the equipment to ensure that the function is intact.
Brand and model: Choose well-known brands and reliable models, usually the quality is guaranteed, and the after-sales service is relatively perfect.
Price comparison: multiple inquiries to ensure reasonable prices to avoid buying inferior equipment at low prices.
Service and Accessories: Find out if the supplier provides after-sales service and accessories to ensure convenient maintenance in subsequent use.
3.Site inspection:
Equipment operation demonstration: The seller is required to perform equipment operation demonstration to observe the actual operation.
Technical Support: Evaluate the seller's technical support capabilities, including whether to provide installation and commissioning services.
Contract protection: Sign a detailed procurement contract to clarify the responsibilities of both parties, equipment specifications, payment methods, after-sales service and other content.
4.Trial Period:
Trial commitment: Try to strive for a certain trial period in order to find potential problems with the equipment during use.
Troubleshooting: During the trial period, pay close attention to the operation of the equipment, if there is a failure, contact the seller as soon as possible.
Through the above methods, you can better purchase a satisfactory second-hand pipe making machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1.Supply channels:
Online marketplaces: For example, Taobao, Alibaba, Jingdong and other platforms can search and find used equipment.
Professional used equipment market: Some areas have a special used equipment market, you can view the equipment situation on the spot.
Industry exhibitions: Participate in machinery, manufacturing related exhibitions, sometimes you can find suppliers to provide second-hand equipment opportunities.
Peers and recommendations: Ask peers and friends in the industry to obtain reliable equipment and supplier information.
2.Selection criteria:
Equipment condition: Carefully check the service life, maintenance records and running status of the equipment to ensure that the function is intact.
Brand and model: Choose well-known brands and reliable models, usually the quality is guaranteed, and the after-sales service is relatively perfect.
Price comparison: multiple inquiries to ensure reasonable prices to avoid buying inferior equipment at low prices.
Service and Accessories: Find out if the supplier provides after-sales service and accessories to ensure convenient maintenance in subsequent use.
3.Site inspection:
Equipment operation demonstration: The seller is required to perform equipment operation demonstration to observe the actual operation.
Technical Support: Evaluate the seller's technical support capabilities, including whether to provide installation and commissioning services.
Contract protection: Sign a detailed procurement contract to clarify the responsibilities of both parties, equipment specifications, payment methods, after-sales service and other content.
4.Trial Period:
Trial commitment: Try to strive for a certain trial period in order to find potential problems with the equipment during use.
Troubleshooting: During the trial period, pay close attention to the operation of the equipment, if there is a failure, contact the seller as soon as possible.
Through the above methods, you can better purchase a satisfactory second-hand pipe making machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
LINK
Contact Us
Tel (wechat): 13336487288
Wechat:+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
