Used Pipe Mill Supplier
Welded tube cooling for used roll forming equipment
- Sort：Information
- Auth:
- Source:
- Release time：2023-03-31 11:30
- Pvs：
【概要描述】In the high-frequency welding process of used roll forming equipment, some of them also need to perform on-line heat treatment of the weld, during which the welded pipe absorbs a lot of heat, and about 90% of the heat is concentrated in the weld area. That is to say, the distribution of heat on the cross-section of the welded pipe is extremely uneven, with the narrow weld area where most of the heat is concentrated, while only a very small amount of heat is distributed on the pipe body. If the pipe body is not forcedly cooled or cooled sufficiently, and the welded pipe is allowed to enter the sizing area, there will be three consequences: one is that it cannot be straightened, or even if it is straightened, it will bend after leaving the unit; The local wear of the profile is serious; the third is to have an adverse effect on the microstructure and properties of the welds of some high-strength and high-carbon equivalent pipes.
Welded tube cooling for used roll forming equipment
【概要描述】In the high-frequency welding process of used roll forming equipment, some of them also need to perform on-line heat treatment of the weld, during which the welded pipe absorbs a lot of heat, and about 90% of the heat is concentrated in the weld area. That is to say, the distribution of heat on the cross-section of the welded pipe is extremely uneven, with the narrow weld area where most of the heat is concentrated, while only a very small amount of heat is distributed on the pipe body. If the pipe body is not forcedly cooled or cooled sufficiently, and the welded pipe is allowed to enter the sizing area, there will be three consequences: one is that it cannot be straightened, or even if it is straightened, it will bend after leaving the unit; The local wear of the profile is serious; the third is to have an adverse effect on the microstructure and properties of the welds of some high-strength and high-carbon equivalent pipes.
- Sort：Information
- Auth:
- Source:
- Release time：2023-03-31 11:30
- Pvs：
Detail
In the high-frequency welding process of used roll forming equipment, some of them also need to perform on-line heat treatment of the weld, during which the welded pipe absorbs a lot of heat, and about 90% of the heat is concentrated in the weld area. That is to say, the distribution of heat on the cross-section of the welded pipe is extremely uneven, with the narrow weld area where most of the heat is concentrated, while only a very small amount of heat is distributed on the pipe body. If the pipe body is not forcedly cooled or cooled sufficiently, and the welded pipe is allowed to enter the sizing area, there will be three consequences: one is that it cannot be straightened, or even if it is straightened, it will bend after leaving the unit; The local wear of the profile is serious; the third is to have an adverse effect on the microstructure and properties of the welds of some high-strength and high-carbon equivalent pipes.
Welded pipe cooling is divided into two stages: high temperature cooling and low temperature cooling
High temperature cooling: The temperature of the weld part drops from 1450~1250°C to about 350°C.
Low temperature cooling: The temperature of the weld joint is cooled from 350°C to room temperature.
Influence of high temperature cooling intensity on welded pipe quality
When the used roll forming equipment is used for the cooling strength at the high temperature stage, for the welded pipes made of Q195, Q215, Q235, 08AI and SPCC tube blanks, because their carbon equivalents usually do not exceed 0.25, the cooling speed is different for the welding seam. The effect of its heat-affected zone performance is not obvious.
However, this is not the case for welded pipes with higher carbon equivalents. For some low-alloy steels such as X42~X100 pipeline steel, the fast or slow cooling rate will affect the structure and properties of the welding heat-affected zone. Taking X80 pipeline steel welded pipe as an example, the cooling rate is different, and the hardness and impact properties of the weld heat-affected zone are different. big different.
Cryogenic cooling of welded pipes
It is generally believed that after the temperature of the weld and the heat affected zone is lower than 350°C, the influence of the cooling rate on the welded pipe is mainly reflected in the physical shape of the pipe and the life of the sizing roll pass. Therefore, when the used roll forming equipment implements the function of low temperature cooling of the welded pipe, one is to cool the welded pipe to room temperature in the sizing section as much as possible, and the other is to fully cool the hole profile of the sizing roll as much as possible.
Criteria for evaluating the final cooling effect of welded pipes
(1) The surface temperature of the welded pipe after exiting the sizing machine is lower than 50°C, and the pipe can be touched for relevant inspection without gloves.
(2) There is a little coolant left on the pipe surface between the straightening head and the flying saw, indicating that the cooling is sufficient.
(3) There is no change in the straightness of the tubes on the header frame.
Part of the content of this site comes from the Internet, this site only provides information storage, the copyright belongs to the original author, does not assume relevant legal responsibility, does not represent the views and positions of this site, if there is any infringement, please contact to delete.
关键词：
More News
The personnel training of spiral welding pipe machine
Time of issue : 2024-12-06
1.Equipment introduction and Basic principles:
The composition of the equipment and the function description of each part.
The production principle of spiral welded pipe, including the basic process of forming, welding and shaping steel strip.
2.Safe operation rules and regulations:
Explain safe operation procedures in detail.
Emphasis on the use of personal protective equipment.
Safe operation procedures for equipment start-up, operation and shutdown.
3.Equipment Operation Training:
How to properly start and shut down the device.
Loading and centering adjustment method of steel belt.
Set and adjust welding current and voltage.
How to control production speed and quality control.
4.Common fault diagnosis and treatment:
Common fault identification and elimination methods.
Diagnosis and countermeasures of welding defects.
Routine maintenance and maintenance of equipment.
5.Quality Control:
How to ensure the stability and consistency of welding.
Methods to detect and test the quality of welded pipes, such as ultrasonic inspection, X-ray inspection, etc.
6. Hands-on Training:
Training and guidance in actual operation to ensure that trainees can operate the equipment independently.
Simulate problem handling and emergency response in a production environment.
7.Theoretical and practical evaluation:
Assess the theoretical knowledge and practical skills of the trainees to ensure that they meet the training requirements.
Training is usually conducted by experienced technicians and engineers and includes both detailed written information and field practice. After the training, there may be a corresponding certification or certificate issued as a sign that the operator is qualified.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Equipment introduction and Basic principles:
The composition of the equipment and the function description of each part.
The production principle of spiral welded pipe, including the basic process of forming, welding and shaping steel strip.
2.Safe operation rules and regulations:
Explain safe operation procedures in detail.
Emphasis on the use of personal protective equipment.
Safe operation procedures for equipment start-up, operation and shutdown.
3.Equipment Operation Training:
How to properly start and shut down the device.
Loading and centering adjustment method of steel belt.
Set and adjust welding current and voltage.
How to control production speed and quality control.
4.Common fault diagnosis and treatment:
Common fault identification and elimination methods.
Diagnosis and countermeasures of welding defects.
Routine maintenance and maintenance of equipment.
5.Quality Control:
How to ensure the stability and consistency of welding.
Methods to detect and test the quality of welded pipes, such as ultrasonic inspection, X-ray inspection, etc.
6. Hands-on Training:
Training and guidance in actual operation to ensure that trainees can operate the equipment independently.
Simulate problem handling and emergency response in a production environment.
7.Theoretical and practical evaluation:
Assess the theoretical knowledge and practical skills of the trainees to ensure that they meet the training requirements.
Training is usually conducted by experienced technicians and engineers and includes both detailed written information and field practice. After the training, there may be a corresponding certification or certificate issued as a sign that the operator is qualified.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Conduct training of slitting crew
Time of issue : 2024-12-05
1.Theoretical Training:
Equipment knowledge: Understand the basic components of the slitting unit and its working principle.
Operation specifications: Familiar with the operation procedures, including starting, stopping, adjusting parameters, common problem handling, etc.
Safety training: Understand the safety risks in equipment operation and corresponding preventive measures, and be familiar with emergency handling methods in emergency situations.
2.Practical operation:
On-site operation demonstration: An experienced operator gives a demonstration on site to guide new employees to master basic operating skills.
Hands-on practice: Let new employees operate the equipment themselves, accumulate experience in actual operation, and solve the problems encountered.
3.Maintenance:
Daily inspection: Train employees to understand the contents and methods of daily inspection of equipment, including cleaning, lubrication, fastening and other work.
Troubleshooting: Teach employees how to identify common equipment failures, understand basic troubleshooting methods and when professional maintenance personnel are required to intervene.
4.Efficiency optimization:
Production Management: Explain how to rationally arrange production tasks to improve equipment utilization and production efficiency.
Data Analysis: Teach employees how to record and analyze production data to find and improve the weak links in production.
5.Assessment and continuous improvement:
Assessment: Evaluate the effectiveness of training through examinations or practical assessments to ensure that employees have the necessary knowledge and skills.
Continuous improvement: Regularly organize training review and skill upgrading courses, and constantly improve the training content according to the actual production and equipment update.
After the training, new employees can work under the supervision of an experienced operator until they are fully competent.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Theoretical Training:
Equipment knowledge: Understand the basic components of the slitting unit and its working principle.
Operation specifications: Familiar with the operation procedures, including starting, stopping, adjusting parameters, common problem handling, etc.
Safety training: Understand the safety risks in equipment operation and corresponding preventive measures, and be familiar with emergency handling methods in emergency situations.
2.Practical operation:
On-site operation demonstration: An experienced operator gives a demonstration on site to guide new employees to master basic operating skills.
Hands-on practice: Let new employees operate the equipment themselves, accumulate experience in actual operation, and solve the problems encountered.
3.Maintenance:
Daily inspection: Train employees to understand the contents and methods of daily inspection of equipment, including cleaning, lubrication, fastening and other work.
Troubleshooting: Teach employees how to identify common equipment failures, understand basic troubleshooting methods and when professional maintenance personnel are required to intervene.
4.Efficiency optimization:
Production Management: Explain how to rationally arrange production tasks to improve equipment utilization and production efficiency.
Data Analysis: Teach employees how to record and analyze production data to find and improve the weak links in production.
5.Assessment and continuous improvement:
Assessment: Evaluate the effectiveness of training through examinations or practical assessments to ensure that employees have the necessary knowledge and skills.
Continuous improvement: Regularly organize training review and skill upgrading courses, and constantly improve the training content according to the actual production and equipment update.
After the training, new employees can work under the supervision of an experienced operator until they are fully competent.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Looper motors are commonly used in steel rolling lines in the metalworking industry
Time of issue : 2024-12-04
1.Installation and commissioning:
Position selection: According to the layout and process requirements of the production line, the installation position of the looping clip motor is reasonably selected.
Fixed and connected: Install the motor firmly in the designated position, and connect it with the corresponding mechanical transmission components.
Electrical wiring: Correct wiring to ensure reliable connection between the motor and the control system.
2.Start and Stop:
Check before starting: Check the lubrication state of the motor and transmission parts, whether the fasteners are loose, and whether the electrical line is normal.
Smooth start: When starting the motor, it should avoid the impact of instantaneous large current, and use soft start or frequency conversion start.
Normal shutdown: The shutdown should gradually reduce the speed of the motor to prevent sudden stop from impacting the equipment.
3.Operation and control:
Constant tension: The tension control system is used to maintain a constant tension during the operation of the looping motor to avoid strip relaxation or pulling.
Speed synchronization: Adjust the running speed of the motor according to the process requirements, so that it matches the speed of the equipment before and after the process.
Feedback control: Through the sensor and feedback system, real-time monitoring of the motor operating status, adjust the parameters to ensure the stable operation of the production line.
4.Maintenance and maintenance:
Regular inspection: Regularly check the wear of the motor and transmission parts, and replace the damaged parts in time.
Lubrication maintenance: Regular lubrication maintenance of mechanical parts to ensure their good operation.
Clean and dust-proof: Keep the motor and control cabinet clean to prevent dust and debris from entering, affecting the performance of the equipment.
5.Troubleshooting:
Fault diagnosis: When there is a fault, professional detection equipment is used to diagnose the motor and determine the cause of the fault.
Timely repair: Repair or replace the fault part according to the diagnosis results to ensure that the equipment returns to normal work as soon as possible.
In short, the correct use and maintenance of the looper clip motor is crucial to ensure the efficient and stable operation of the metal processing line.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Installation and commissioning:
Position selection: According to the layout and process requirements of the production line, the installation position of the looping clip motor is reasonably selected.
Fixed and connected: Install the motor firmly in the designated position, and connect it with the corresponding mechanical transmission components.
Electrical wiring: Correct wiring to ensure reliable connection between the motor and the control system.
2.Start and Stop:
Check before starting: Check the lubrication state of the motor and transmission parts, whether the fasteners are loose, and whether the electrical line is normal.
Smooth start: When starting the motor, it should avoid the impact of instantaneous large current, and use soft start or frequency conversion start.
Normal shutdown: The shutdown should gradually reduce the speed of the motor to prevent sudden stop from impacting the equipment.
3.Operation and control:
Constant tension: The tension control system is used to maintain a constant tension during the operation of the looping motor to avoid strip relaxation or pulling.
Speed synchronization: Adjust the running speed of the motor according to the process requirements, so that it matches the speed of the equipment before and after the process.
Feedback control: Through the sensor and feedback system, real-time monitoring of the motor operating status, adjust the parameters to ensure the stable operation of the production line.
4.Maintenance and maintenance:
Regular inspection: Regularly check the wear of the motor and transmission parts, and replace the damaged parts in time.
Lubrication maintenance: Regular lubrication maintenance of mechanical parts to ensure their good operation.
Clean and dust-proof: Keep the motor and control cabinet clean to prevent dust and debris from entering, affecting the performance of the equipment.
5.Troubleshooting:
Fault diagnosis: When there is a fault, professional detection equipment is used to diagnose the motor and determine the cause of the fault.
Timely repair: Repair or replace the fault part according to the diagnosis results to ensure that the equipment returns to normal work as soon as possible.
In short, the correct use and maintenance of the looper clip motor is crucial to ensure the efficient and stable operation of the metal processing line.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Apply of Bedroom screw looping
Time of issue : 2024-12-03
1.Basic construction: A typical roller type bedroom spiral hoop usually consists of two sets of rollers that form a spiral shaped channel for guiding and supporting the metal strip.
2.Operation principle: When the metal strip passes through the looper, the strip is guided and supported in the spiral path. Due to the spiral structure of the looper, the strip can be smoothly transmitted under the condition of uneven strip speed to ensure the normal progress of the subsequent process.
3.Commissioning and maintenance: Used equipment needs to be inspected and maintained in detail before use. Includes:
Cleaning: Remove oil, dust and so on from the surface.
Lubrication: Check and add lubricating oil to ensure the normal operation of each transmission component.
Calibration: Ensure that the neutralization pressure of the roller is set correctly.
Replacement parts: Check for wear and replace necessary parts.
4.Application process: In the process of use, it is necessary to pay attention to the operation specifications, monitor the operating status of the equipment, and adjust the equipment parameters in time to meet the strip specifications and process requirements. In addition, it is also necessary to pay attention to safe operation to prevent accidents.
Through the above methods, the used roller bedroom spiral looper can continue to play its function and provide support for metal processing production.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Basic construction: A typical roller type bedroom spiral hoop usually consists of two sets of rollers that form a spiral shaped channel for guiding and supporting the metal strip.
2.Operation principle: When the metal strip passes through the looper, the strip is guided and supported in the spiral path. Due to the spiral structure of the looper, the strip can be smoothly transmitted under the condition of uneven strip speed to ensure the normal progress of the subsequent process.
3.Commissioning and maintenance: Used equipment needs to be inspected and maintained in detail before use. Includes:
Cleaning: Remove oil, dust and so on from the surface.
Lubrication: Check and add lubricating oil to ensure the normal operation of each transmission component.
Calibration: Ensure that the neutralization pressure of the roller is set correctly.
Replacement parts: Check for wear and replace necessary parts.
4.Application process: In the process of use, it is necessary to pay attention to the operation specifications, monitor the operating status of the equipment, and adjust the equipment parameters in time to meet the strip specifications and process requirements. In addition, it is also necessary to pay attention to safe operation to prevent accidents.
Through the above methods, the used roller bedroom spiral looper can continue to play its function and provide support for metal processing production.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
