Used Pipe Mill Supplier
Weld quality failure caused by used welded pipe machines (5)
- Sort：Information
- Auth:
- Source:
- Release time：2023-10-10 11:30
- Pvs：
【概要描述】When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Weld quality failure caused by used welded pipe machines (5)
【概要描述】When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
- Sort：Information
- Auth:
- Source:
- Release time：2023-10-10 11:30
- Pvs：
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
These weld quality failures will occur when the used welded pipe machines is making pipes: ① through-length lap welding. ② Periodic lap welding. ③ Open the seam. ④ Trachoma. ⑤ Peach-shaped tube. ⑥ Weld seam gnawed. ⑦Outer burr planing. ⑧ Heating. ⑨ The current is small. ⑩ Melting of induction coils and electrodes. ⑪ Fire. ⑫ "No high pressure" phenomenon. We can summarize 12 causes of weld quality failures.
Peach tube
The so-called "peach-shaped" pipe means that the weld part of the pipe is protruding like a peach tip (Figure 23).
The weld of this kind of pipe is generally "eight" shape without internal burr or small internal burr. However, the amount of planing of the external burrs is generally large, and the external weld seam after planing still protrudes seriously, and the pipe surface is obviously not round. The main reasons for the "peach-shaped" tube are as follows:
(1) Wear of the hole pattern.
The bottom diameter of the upper roller of the closed hole pattern (Fig. 24) and the upper edge of the extrusion roller hole pattern (Fig. 25) are subjected to relatively large pressure when the tube blank is deformed, and the wear is more serious. This part forms an obvious deficit, so that the weld part of the tube blank cannot be fully deformed, and a "peach-shaped" tube is formed after welding. In this case, the best solution is to replace the new hole type in time. This is also another special wear of closed hole type.
(2)Small pressing force.
The upper extrusion force is small In the two-roll extrusion roller structure, when the upper extrusion force is small, the extrusion roller shaft will form an upper elevation angle, especially in the middle and later stages of the extrusion roller use, the closed hole type When the pressure is insufficient, the probability of producing a "peach-shaped" tube is even greater. If the "peach shape" problem is not very serious, the pressure of the closed hole pattern and the upper pressure of the squeeze roller can be appropriately increased, which can be well controlled.
The above is one of the reasons for the quality failure of the weld seam when the used welded pipe machines is making pipes, peach-shaped pipe. The main reasons for the formation of the peach-shaped tube are (1) wear of the hole type. (2) The upper extrusion force is small.
关键词：
More News
Furuiwo Used 140 Pipe Welding Machine Unit
Time of issue : 2025-04-23
Recently, Furuiwo launched its highly anticipated used pipe welding machine—the 140 model pipe welding unit. With outstanding processing capabilities and significant cost-performance advantages, this equipment has become an ideal choice for small and medium-sized pipe processing enterprises.
Core Performance: Precision and Efficiency for Diverse Needs
The Furuiwo 140 used pipe welding machine emphasizes practicality and stability, with key technical parameters as follows:
Processing Diameter Range: Φ60-159 mm, covering production needs from light-duty pipes to medium industrial pipelines;
Processing Thickness: Supports materials up to 5 mm, suitable for construction and machinery manufacturing;
Processing Speed: 60 meters/minute, significantly improving efficiency while reducing energy consumption.
The unit adopts a modular design for easy maintenance. After comprehensive inspection and upgrades by Furuiwo’s technical team, its performance is close to new machines, yet procurement costs are substantially lower.
Market Advantages: Economic and Environmental Value
Amid intensifying competition in manufacturing, used pipe welding machines are becoming a strategic choice for cost optimization. The Furuiwo 140 model stands out with the following advantages:
Cost Savings: Priced 40%-60% lower than new machines, ideal for budget-conscious SMEs;
Rapid Deployment: Pre-tested and ready for immediate use, shortening production setup time;
Sustainability: Extends equipment lifecycle, aligning with green manufacturing trends.
Wang Qiang, Furuiwo’s Sales Director, stated: “We are committed to providing high-value solutions. This used pipe welding machine not only ensures reliability but also comes with full after-sales support, including a one-year warranty and lifelong technical assistance.”
Applications: Versatility Across Industries
The unit processes carbon steel, stainless steel, and other materials, serving industries such as:
Construction: Production of guardrails and scaffold pipes;
Automotive: Exhaust pipes and chassis components;
Energy: Customized oil and water pipelines.
A Zhejiang-based pipe manufacturer reported: “After purchasing Furuiwo’s used pipe welding machine, our productivity increased by 30%, with costs halved compared to new equipment—ROI far exceeded expectations.”
Industry Outlook: Growing Demand for Used Equipment
As manufacturing upgrades, the used industrial equipment market is booming. Industry reports indicate a 25% year-on-year growth in China’s used pipe welding machine transactions in 2023, with refurbished imported brands gaining traction. Furuiwo, leveraging technical expertise and channel advantages, has emerged as a leader in this sector.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Recently, Furuiwo launched its highly anticipated used pipe welding machine—the 140 model pipe welding unit. With outstanding processing capabilities and significant cost-performance advantages, this equipment has become an ideal choice for small and medium-sized pipe processing enterprises.
Core Performance: Precision and Efficiency for Diverse Needs
The Furuiwo 140 used pipe welding machine emphasizes practicality and stability, with key technical parameters as follows:
Processing Diameter Range: Φ60-159 mm, covering production needs from light-duty pipes to medium industrial pipelines;
Processing Thickness: Supports materials up to 5 mm, suitable for construction and machinery manufacturing;
Processing Speed: 60 meters/minute, significantly improving efficiency while reducing energy consumption.
The unit adopts a modular design for easy maintenance. After comprehensive inspection and upgrades by Furuiwo’s technical team, its performance is close to new machines, yet procurement costs are substantially lower.
Market Advantages: Economic and Environmental Value
Amid intensifying competition in manufacturing, used pipe welding machines are becoming a strategic choice for cost optimization. The Furuiwo 140 model stands out with the following advantages:
Cost Savings: Priced 40%-60% lower than new machines, ideal for budget-conscious SMEs;
Rapid Deployment: Pre-tested and ready for immediate use, shortening production setup time;
Sustainability: Extends equipment lifecycle, aligning with green manufacturing trends.
Wang Qiang, Furuiwo’s Sales Director, stated: “We are committed to providing high-value solutions. This used pipe welding machine not only ensures reliability but also comes with full after-sales support, including a one-year warranty and lifelong technical assistance.”
Applications: Versatility Across Industries
The unit processes carbon steel, stainless steel, and other materials, serving industries such as:
Construction: Production of guardrails and scaffold pipes;
Automotive: Exhaust pipes and chassis components;
Energy: Customized oil and water pipelines.
A Zhejiang-based pipe manufacturer reported: “After purchasing Furuiwo’s used pipe welding machine, our productivity increased by 30%, with costs halved compared to new equipment—ROI far exceeded expectations.”
Industry Outlook: Growing Demand for Used Equipment
As manufacturing upgrades, the used industrial equipment market is booming. Industry reports indicate a 25% year-on-year growth in China’s used pipe welding machine transactions in 2023, with refurbished imported brands gaining traction. Furuiwo, leveraging technical expertise and channel advantages, has emerged as a leader in this sector.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Small cost replacement of 140 second-hand welded pipe equipment
Time of issue : 2025-03-21
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Still worrying about production capacity? 140 refurbished welded pipe production line to relieve worries!
Time of issue : 2025-03-19
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Why did you choose 60 used cold bending machine
Time of issue : 2025-03-11
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
