MENU

/
/
Used high frequency welded pipe production line thin-walled pipe surface folding line solution

Used high frequency welded pipe production line thin-walled pipe surface folding line solution

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-04-24 11:30
  • Pvs:

【概要描述】The used high frequency welded pipe production line usually has the problem of thin-walled pipe fold line. The pipe surface fold line refers to the thin and shallow dents that exist on the surface of the formed tube blank in the circumferential direction. The thicker and deeper ones are called "slubs". Tubes and ultra-thin-walled tubes; sometimes the broken line can be seen but not felt, and some can be seen or touched, with a slight touch. The common feature is the appearance of surrounding tube blanks.

Used high frequency welded pipe production line thin-walled pipe surface folding line solution

【概要描述】The used high frequency welded pipe production line usually has the problem of thin-walled pipe fold line. The pipe surface fold line refers to the thin and shallow dents that exist on the surface of the formed tube blank in the circumferential direction. The thicker and deeper ones are called "slubs". Tubes and ultra-thin-walled tubes; sometimes the broken line can be seen but not felt, and some can be seen or touched, with a slight touch. The common feature is the appearance of surrounding tube blanks.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-04-24 11:30
  • Pvs:
Detail

The used high frequency welded pipe production line usually has the problem of thin-walled pipe fold line. The pipe surface fold line refers to the thin and shallow dents that exist on the surface of the formed tube blank in the circumferential direction. The thicker and deeper ones are called "slubs". Tubes and ultra-thin-walled tubes; sometimes the broken line can be seen but not felt, and some can be seen or touched, with a slight touch. The common feature is the appearance of surrounding tube blanks.

 

Used high frequency welded pipe production line

 

The fundamental reason is that the tube blank is relatively soft and has wrinkles. The following measures can be taken to adjust the used high frequency welded pipe production line:

 

(1) Give up the storage, let the unit drag the tube billet away, and then stop the machine to connect the belt. Although the efficiency is lower, the quality can be guaranteed.

 

(2) Strengthen flat roll rolling in sections to eliminate broken lines. That is, first use the W-shaped roll and the second rough forming roll to roll the edge of the shaped tube with a larger rolling force, so that the edge does not have a broken line feel; then appropriately increase the third to the fifth rough forming flat roll Rolling force to eliminate the broken line at the bottom of the tube.

 

Used high frequency welded pipe production line

 

(3) Pay special attention to the balance of the force on both sides of the upper flat roll, and appropriately increase the rolling force.

 

(4) Wrap the finished tube with a thin cloth, hold it by hand and move it in a spiral manner to confirm the effect of eliminating the broken line; then add a certain amount of rolling force in a targeted manner.

 

The above is to propose adjustment solutions for the thin-walled pipe surface folding line of the used high frequency welded pipe production line. I hope it will be helpful to you. Our company has many brands and resources, and there is always one that suits you. You only need to inform us of your pipe-making needs, and our company will provide you with used welded pipe equipment that truly suits your needs. Welcome new and old customers to consult and order.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn