MENU

/
/
Types of external burrs appearing in used pipe tube mill

Types of external burrs appearing in used pipe tube mill

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-06-26 11:30
  • Pvs:

【概要描述】The external burr shape appears when the used pipe tube mills. The shape of the burr inside the welded pipe has a certain logical relationship with the welding temperature, extrusion force and welding speed.

Types of external burrs appearing in used pipe tube mill

【概要描述】The external burr shape appears when the used pipe tube mills. The shape of the burr inside the welded pipe has a certain logical relationship with the welding temperature, extrusion force and welding speed.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-06-26 11:30
  • Pvs:
Detail

The external burr shape appears when the used pipe tube mills. The shape of the burr inside the welded pipe has a certain logical relationship with the welding temperature, extrusion force and welding speed.

 

The operator can see the essence of the operating state of the used pipe tube mills through the phenomenon of the shape of the external burr.

Correlation between matching state of speed, temperature, extrusion force and external burr shape

 

Used pipe tube mills

External burr shape: bifurcated

Speed and temperature extrusion force matching status: welding heat is too low, welding speed is too fast, and extrusion force is too small.

Adjustment measures: immediately reduce the speed or increase the welding heat or increase the extrusion force.

 

Used pipe tube mills

External burr shape: linear

Speed and temperature extrusion force matching status: welding heat is low, welding speed is high, and extrusion force is low.

Adjustment measures: increase the welding heat or reduce the speed or increase the squeezing force appropriately.

 

Used pipe tube mills

External burr shape: small hilly shape

Speed and temperature extrusion force matching state: maintain current operation.

Adjustment measures: normal production + pay attention to observation

 

Used pipe tube mils

External burr shape: large hilly shape

Speed and temperature extrusion force matching status: welding heat is too high, welding speed is too low, and the extrusion force is too large.

Adjustment measures: Immediately reduce the welding heat or accelerate, or appropriately reduce the squeezing force.

 

The above are the types of external burrs that appear when the second-hand steel pipe is rolled by machine-made pipes. The essence of the running state of the used pipe tube mills can be analyzed through the shape of the external burr.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn