Common faults of used welded pipe mills production line forming machines (1)
- Sort:Information
- Auth:
- Source:
- Release time:2023-09-21 11:30
- Pvs:
【概要描述】Common faults of used welded pipe mills production line forming machines can be divided into ① deviation. ② scratches. ③ "indenter" phenomenon. ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.
Common faults of used welded pipe mills production line forming machines (1)
【概要描述】Common faults of used welded pipe mills production line forming machines can be divided into ① deviation. ② scratches. ③ "indenter" phenomenon. ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.
- Sort:Information
- Auth:
- Source:
- Release time:2023-09-21 11:30
- Pvs:
Common faults of used welded pipe mills production line forming machines can be divided into ① deviation. ② scratches. ③ "indenter" phenomenon. ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.
The deviation is also called turning over the belt. Due to various reasons, the deviation will occur at any time between the rolls of the forming machine. The specific performance is that after the tube blank comes out of the flat roll or vertical roll, the heights of the two edges are different. In severe cases, the tube blank will turn over and cannot enter the next pass smoothly, so it is forced to stop processing, which directly affects the production. Increase in work rate. However, there are two reasons for the deviation of the forming machine of the used welded pipe mills production line, that is, the deviation of the flat roll and the deviation of the vertical roll. We will introduce them in detail according to these two reasons.
1.1 Analysis of the cause of the deviation of the flat roller
The deviation of the flat roll is mainly caused by the following reasons (excluding the defects such as the camber of the raw material).
(1) The center of the hole pattern is not correct.
When the position of the center of the pass is not correct, the tube blank will deviate from the rolling center line during the rolling process and deviate. When the deformation angle of the pass is greater than 90°, and the center of the pass of the upper and lower rolls is not aligned, the tube blank will be turned up in the direction of the deviation of the center of the pass, as shown in Figure 8(a); when the center of the pass of the lower roll is not aligned, The tube blank will also be turned up in the direction of deviation from the center of the pass, as shown in Figure 8(b); when the center of the upper roll pass is not aligned, the tube blank will be turned up in the opposite direction, as shown in Figure 8(c). If the deformation angle of the tube blank is less than 90°, except when the upper and lower hole patterns are displaced as a whole, which is opposite to the deformation greater than 90° (as shown in Figure 9), the rest are in the same direction as the same type of offset. This is a specific manifestation of the deviation of the tube blank caused by the irregular center of the pass after several axial displacements of the roll. During the treatment, according to the assembly structure of the roll, check whether the positioning device and shaft of the roll have locking failure and looseness out of control, and adjust the tightening in time before production.
(2) Uneven pressure on the upper roller.
When the pressure of the upper roller is not uniform, it can cause the upper flat roller to be tilted and biased, so that the gaps on both sides of the upper and lower rollers are different.
That is, when the deformation angle is less than 90°, the tube blank will be turned up to the side with lower pressure, as shown in Figure 10(a); when the deformation angle is greater than 90°, the tube blank will be turned up to the side with higher pressure, as shown in Figure 10 ( b). The tube blank in the closed hole pattern will also rotate in the direction of less pressure to control the direction of the tube seam. In this case, adjust the pressing amount of the flat roll, keep the upper roll in a horizontal position, and make auxiliary direction adjustment with the help of the front vertical roll of the flat roll.
(3)Bearing damage.
Whether the bearing of the upper or lower roll is damaged, the reduction of the upper roll will change, resulting in the deviation of the tube blank. The deviation of the deviation is exactly the same as the deviation caused by the uneven pressure. In production, we need to detect the abnormal rotation sound of the bearing, or whether the touch part is hot, we can judge the damage degree of the bearing, and replace it in time without blind adjustment.
(4)Insufficient pressure.
What we mean by insufficient pressure means that after the upper roller is pressed, there is still a large gap between the tube blank and the pass, and the pass cannot completely or well control the tube blank and the deviation occurs. Its performance is that the tube blank floats during operation, and swings up and down from left to right. If it is in the lead, the head of the tube blank will be upturned, which can be solved as long as the reduction amount is appropriately increased.
(5)Incorrect multi-pass hole type.
Incorrect multi-pass pass means that the center of two or more passes is not on the rolling line. When the tube blank deviates, a strange phenomenon often occurs during the adjustment. For example: When the tube blank is turned up to the outside, we will try to make it move inward according to the adjustment principle to overcome the problem of eversion. However, after the adjustment, the tube blank will suddenly turn inward when it continues to run, and sometimes the inward turning phenomenon will occur in the same direction at the back of the tube blank running. The conventional adjustment method cannot solve this problem. This is because the center of the multi-pass hole type is not correct. At this time, the tube blank is a twisting operation process in the forming machine (Fig. 11). For this deviation phenomenon, we should find the cause from the back of the tube blank, that is, find the problem from the first few passes of the forming machine, and make micro-adjustments and alignments one by one, so that the center of each pass is the same. When it can coincide with the rolling center, the deviation phenomenon can be fundamentally solved. This is the origin of the adjustment jargon that we often say is called "turning the back and adjusting the front".
(6) The center of the vertical roller is not correct.
The misalignment of the vertical roll center is also an important factor for the deviation of the tube blank after the flat roll comes out. The reason why this phenomenon is often overlooked is that the operation of the tube blank on the vertical roll is basically in a normal state, so in production, special attention should be paid to observe whether the tube blank is normal at the moment before it enters the flat roll after it comes out of the vertical roll. If the center of the vertical roller deviates, as long as we adjust the position of the vertical roller a little, we can control the best direction of the tube blank entering the flat roller, so that the deviation problem can be solved.
The reasons for the deviation of the common faults of the forming machine of the used welded pipe mills production line are mainly divided into the deviation of the flat roll and the deviation of the vertical roll. Today, we will introduce the analysis of the reasons for the deviation of the flat roll: ① The center of the hole is not correct.② The upper roll Uneven pressure.③Damage of pumping bearing ④Insufficient pressure.⑤Incorrect multi-pass hole type.⑥The center of the vertical roller is not correct.
More News

Time of issue : 2025-02-13
1.Equipment condition check
Appearance inspection: Check whether the equipment has obvious damage, rust or deformation.
Core component inspection: Focus on inspecting key components such as welding joints, transmission systems, and electrical systems to ensure that there is no serious wear or failure.
Operation test: Conduct trial operation to observe whether the equipment runs smoothly and whether the welding quality meets the requirements.
2.Equipment history
Service life: Understand the use time of the equipment, usually the longer the service life, the higher the risk of failure.
Maintenance records: Check the maintenance and repair records of the equipment to determine whether it is well maintained.
Working environment: Understand the working environment before the equipment, harsh environment may lead to increased equipment wear.
3.Technical parameters
Production capacity: Confirm whether the production capacity of the equipment meets the demand, including welding speed, pipe diameter range, etc.
Accuracy requirements: Check the welding accuracy of the equipment to ensure that it meets the production standard.
Compatibility: Confirm whether the equipment can be adapted to existing production lines or raw materials.
4.Brand and model
Brand reputation: Choose a well-known brand, usually the quality and after-sales service is more guaranteed.
Model suitability: Ensure that the model is suitable for current production needs and avoid insufficient or excessive functions.
5.Price evaluation
Market conditions: Understand the market price of the same type of equipment, to avoid too high or too low prices.
Cost performance: Considering the equipment condition, performance and price, choose cost-effective equipment.
6.After-sales service
Warranty Period: Confirm whether the equipment is under warranty, or whether the warranty can be extended.
Technical Support: Find out if the supplier provides technical support or repair services.
Accessories supply: Confirm that equipment accessories are easy to obtain to avoid the risk of stopping production.
7.Legal and Compliance
Equipment legitimacy: Ensure that the source of equipment is legitimate, avoid buying stolen goods or illegal equipment.
Compliance: Verify that the equipment meets local safety standards and environmental requirements.
8.Supplier reputation
Supplier background: Choose suppliers with good reputation to reduce the risk of purchase.
User Reviews: View other users' reviews of suppliers to understand their service quality and equipment condition.
9.Transportation and installation
Transportation costs: Consider the transportation costs of equipment, especially large equipment.
Installation and commissioning: Confirm whether the supplier provides installation and commissioning services to ensure the normal use of the equipment.
10.Contract Terms
Clear terms: Ensure that key information such as equipment condition, price, warranty period, etc. is clear in the contract.
Return Policy: Understand the return policy to avoid the inability to return if the equipment does not meet the requirements.
Summary
The purchase of second-hand pipe welding machine needs to consider the equipment status, history, technical parameters, price, after-sales service and other factors to ensure that the equipment meets the production demand and is cost-effective.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1.Equipment condition check
Appearance inspection: Check whether the equipment has obvious damage, rust or deformation.
Core component inspection: Focus on inspecting key components such as welding joints, transmission systems, and electrical systems to ensure that there is no serious wear or failure.
Operation test: Conduct trial operation to observe whether the equipment runs smoothly and whether the welding quality meets the requirements.
2.Equipment history
Service life: Understand the use time of the equipment, usually the longer the service life, the higher the risk of failure.
Maintenance records: Check the maintenance and repair records of the equipment to determine whether it is well maintained.
Working environment: Understand the working environment before the equipment, harsh environment may lead to increased equipment wear.
3.Technical parameters
Production capacity: Confirm whether the production capacity of the equipment meets the demand, including welding speed, pipe diameter range, etc.
Accuracy requirements: Check the welding accuracy of the equipment to ensure that it meets the production standard.
Compatibility: Confirm whether the equipment can be adapted to existing production lines or raw materials.
4.Brand and model
Brand reputation: Choose a well-known brand, usually the quality and after-sales service is more guaranteed.
Model suitability: Ensure that the model is suitable for current production needs and avoid insufficient or excessive functions.
5.Price evaluation
Market conditions: Understand the market price of the same type of equipment, to avoid too high or too low prices.
Cost performance: Considering the equipment condition, performance and price, choose cost-effective equipment.
6.After-sales service
Warranty Period: Confirm whether the equipment is under warranty, or whether the warranty can be extended.
Technical Support: Find out if the supplier provides technical support or repair services.
Accessories supply: Confirm that equipment accessories are easy to obtain to avoid the risk of stopping production.
7.Legal and Compliance
Equipment legitimacy: Ensure that the source of equipment is legitimate, avoid buying stolen goods or illegal equipment.
Compliance: Verify that the equipment meets local safety standards and environmental requirements.
8.Supplier reputation
Supplier background: Choose suppliers with good reputation to reduce the risk of purchase.
User Reviews: View other users' reviews of suppliers to understand their service quality and equipment condition.
9.Transportation and installation
Transportation costs: Consider the transportation costs of equipment, especially large equipment.
Installation and commissioning: Confirm whether the supplier provides installation and commissioning services to ensure the normal use of the equipment.
10.Contract Terms
Clear terms: Ensure that key information such as equipment condition, price, warranty period, etc. is clear in the contract.
Return Policy: Understand the return policy to avoid the inability to return if the equipment does not meet the requirements.
Summary
The purchase of second-hand pipe welding machine needs to consider the equipment status, history, technical parameters, price, after-sales service and other factors to ensure that the equipment meets the production demand and is cost-effective.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-02-12
1. Material basis: Welded pipe as the skeleton material of furniture
Structural support: Steel pipes made of welded pipes are often used in the frame structure of furniture, such as chair legs, table supports, bed frames, bookshelves, etc. Its high strength and stability can withstand large loads.
Lightweight design: Compared with solid steel, welded pipe is lightweight and low cost, suitable for furniture requiring portability or simple design (such as outdoor folding tables and chairs).
2. Design flexibility
Diversified modeling: Welded pipes can be processed into complex shapes through bending, cutting, welding and other processes to meet the curve or geometric design needs of modern furniture (such as streamlined bar chairs, creative shelves).
Industrial style: The exposed metal welded pipe structure is the iconic element of industrial furniture, often used in cafes, LOFT Spaces and other scenes.
3. Functionality and durability
Outdoor furniture: Galvanized welded pipes or steel pipes treated with anti-rust are often used in outdoor furniture (such as garden tables and chairs, balcony guardrail), with strong weather resistance.
Load-bearing requirements: The high strength characteristics of welded pipes are suitable for the production of storage shelves, shelves and other furniture requiring high load-bearing.
4. Production process coordination
Mass production: The efficient production mode of welded pipe mechanism is matched with the large-scale demand of furniture manufacturing, reducing raw material costs.
Customized processing: Furniture factories can customize welded pipes of different specifications (such as diameter and wall thickness) according to design requirements to improve product adaptability.
5. Environmental Protection and Sustainability
Material recycling: Steel can be recycled, in line with the design concept of environmentally friendly furniture.
Surface treatment: Spraying, painting and other processes can improve the beauty and durability of welded pipe furniture, while reducing the environmental burden.
6. Market trends
Modular furniture: The standardized interface of welded pipe structure is easy to assemble and disassemble, catering to the popular trend of modular furniture.
Cross-border combination: Welded pipes are often combined with wood, glass, plastic and other materials to create a mixed-match style (such as metal + wood dining tables).
Typical Application Case
Office furniture: Steel desk bracket, conference chair frame.
Home Decoration: Metal bookshelf, coat rack, lamp stand.
Public Facilities: Park benches, shopping mall display shelves.
Summary
The welded pipe mechanism provides the furniture industry with an economical, durable and flexible material solution that drives innovation in the function, aesthetics and sustainability of modern furniture. Its combination with furniture is not only an extension of industrial technology, but also an expansion of design language.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1. Material basis: Welded pipe as the skeleton material of furniture
Structural support: Steel pipes made of welded pipes are often used in the frame structure of furniture, such as chair legs, table supports, bed frames, bookshelves, etc. Its high strength and stability can withstand large loads.
Lightweight design: Compared with solid steel, welded pipe is lightweight and low cost, suitable for furniture requiring portability or simple design (such as outdoor folding tables and chairs).
2. Design flexibility
Diversified modeling: Welded pipes can be processed into complex shapes through bending, cutting, welding and other processes to meet the curve or geometric design needs of modern furniture (such as streamlined bar chairs, creative shelves).
Industrial style: The exposed metal welded pipe structure is the iconic element of industrial furniture, often used in cafes, LOFT Spaces and other scenes.
3. Functionality and durability
Outdoor furniture: Galvanized welded pipes or steel pipes treated with anti-rust are often used in outdoor furniture (such as garden tables and chairs, balcony guardrail), with strong weather resistance.
Load-bearing requirements: The high strength characteristics of welded pipes are suitable for the production of storage shelves, shelves and other furniture requiring high load-bearing.
4. Production process coordination
Mass production: The efficient production mode of welded pipe mechanism is matched with the large-scale demand of furniture manufacturing, reducing raw material costs.
Customized processing: Furniture factories can customize welded pipes of different specifications (such as diameter and wall thickness) according to design requirements to improve product adaptability.
5. Environmental Protection and Sustainability
Material recycling: Steel can be recycled, in line with the design concept of environmentally friendly furniture.
Surface treatment: Spraying, painting and other processes can improve the beauty and durability of welded pipe furniture, while reducing the environmental burden.
6. Market trends
Modular furniture: The standardized interface of welded pipe structure is easy to assemble and disassemble, catering to the popular trend of modular furniture.
Cross-border combination: Welded pipes are often combined with wood, glass, plastic and other materials to create a mixed-match style (such as metal + wood dining tables).
Typical Application Case
Office furniture: Steel desk bracket, conference chair frame.
Home Decoration: Metal bookshelf, coat rack, lamp stand.
Public Facilities: Park benches, shopping mall display shelves.
Summary
The welded pipe mechanism provides the furniture industry with an economical, durable and flexible material solution that drives innovation in the function, aesthetics and sustainability of modern furniture. Its combination with furniture is not only an extension of industrial technology, but also an expansion of design language.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-02-11
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-02-08
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
LINK
Contact Us
Tel (wechat): 13336487288
Wechat:+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
