MENU

/
/
About the influence of the defects of the welded pipe blank of the high frequency welded pipe machine on the quality of the welded pipe (5)

About the influence of the defects of the welded pipe blank of the high frequency welded pipe machine on the quality of the welded pipe (5)

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-07-10 11:30
  • Pvs:

【概要描述】If the high frequency welded pipe machine refers to the chemical composition and mechanical properties of welded tube blanks that require certain inspection methods to be known as invisible defects; then, those defects that can be seen only by vision are called tube blanks. Overt defect.

About the influence of the defects of the welded pipe blank of the high frequency welded pipe machine on the quality of the welded pipe (5)

【概要描述】If the high frequency welded pipe machine refers to the chemical composition and mechanical properties of welded tube blanks that require certain inspection methods to be known as invisible defects; then, those defects that can be seen only by vision are called tube blanks. Overt defect.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-07-10 11:30
  • Pvs:
Detail

If the high frequency welded pipe machine refers to the chemical composition and mechanical properties of welded tube blanks that require certain inspection methods to be known as invisible defects; then, those defects that can be seen only by vision are called tube blanks. Overt defect.

 

The dominant defects of the welded tube blank of the high frequency welded pipe machine generally include cracked edges, broken edges, sawtooth, pitting, scratches, roll marks, dark spots, edge burrs, sickle bends, wrinkles, waves, edge warping, and points. Layers, warped skins, pinholes, sticky rolls, soft spots, rust, oxide layers, towers, loose rolls, etc. Let me introduce you to the causes of cracked edges and the effect of cracked edge billets on welded pipes.

 

Causes of burrs and edge warping:

(1) The slitting blade of slitting is not sharp.

(2) The precision of the slitter knife shaft is poor, or there are impurities on the spacer plane, which causes the slitting knife plane to swing on the knife shaft, which affects the side clearance and produces periodic burrs on the edge of the tube blank.

(3) The gap between the upper and lower edges of the slitting blade is too large.

 

High frequency welded pipe machine

 

The effect of burrs and edge warpage on the quality of welded pipes:

(1)Slight tube blank burrs and edge warping have little effect on thick-walled tubes and standard-walled tubes: for some tubes that require smaller internal burrs and extremely small tubes, you can also reverse the tube blank The feeding method achieves the purpose.

 

(2) When the edge is warped severely, a "corner joint" will be formed, that is, the outer edge corner joint shown in Figure A will appear when the A side is rolled on the outside, and the outer edge corner joint shown in Figure A will appear when the A side is rolled to the inside. The inner edge of the corner joint, the two edge butt forms are undesirable for the welding process.

 

High frequency welded pipe machine

 

(3) The external burrs of thin-walled tubes are difficult to remove. Tube blanks with large edge burrs and warped edges should be avoided as much as possible in the production of thin-walled tubes.

 

About the high frequency welded pipe machine welded tube defects (5) introduction of burrs and edge warping, and the impact of burrs and edge warping on the quality of welded pipes, I hope it can help you.

关键词:

More News

How to solve the common problems of used high-frequency welded pipe making machine?
How to solve the common problems of used high-frequency welded pipe making machine?
Used high-frequency welded pipe making machine is a commonly used equipment in the metal pipe processing industry, which mainly uses high-frequency welding technology to weld strip steel into pipes after forming. Because it is cost-effective and easy to operate, it is favored by small and medium-sized enterprises.
Detail
Used high-frequency welded pipe making machine is a commonly used equipment in the metal pipe processing industry, which mainly uses high-frequency welding technology to weld strip steel into pipes after forming. Because it is cost-effective and easy to operate, it is favored by small and medium-sized enterprises.
Five major issues that must be considered before purchasing a second-hand high-frequency welded pipe machine
Five major issues that must be considered before purchasing a second-hand high-frequency welded pipe machine
When looking for a second-hand high-frequency welded pipe machine in the market, it is crucial to understand its product characteristics, which can help you make an informed investment decision. A high quality second-hand high-frequency welded pipe machine should have the following five key characteristics:
Detail
When looking for a second-hand high-frequency welded pipe machine in the market, it is crucial to understand its product characteristics, which can help you make an informed investment decision. A high quality second-hand high-frequency welded pipe machine should have the following five key characteristics:
How to avoid the price-performance trap when choosing a second-hand high-frequency welded pipe machine?
How to avoid the price-performance trap when choosing a second-hand high-frequency welded pipe machine?
When looking for cost-effective production solutions in the market, second-hand high-frequency welded pipe machines have become the choice of many companies.
Detail
When looking for cost-effective production solutions in the market, second-hand high-frequency welded pipe machines have become the choice of many companies.
Maintenance problem: What are the maintenance points of second-hand high-frequency pipe welding machine?
Maintenance problem: What are the maintenance points of second-hand high-frequency pipe welding machine?
Second-hand high-frequency pipe welding machine, as an important equipment in industrial pipe production, can provide stable performance despite the use. But proper maintenance is essential to extend its service life.
Detail
Second-hand high-frequency pipe welding machine, as an important equipment in industrial pipe production, can provide stable performance despite the use. But proper maintenance is essential to extend its service life.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn