100 Rectifitor cabinet
|2||Product brand||BAODING SANYI TIANXING|
|3||High frequency power||GGP100KW|
|Model||Steel pipe type||Welding speed||Welding method||Remark|
|Induction welding||Steel Pipe,Aluminum tube, Stainless steel|
The 100 high frequency rectifier cabinet is one of the 100 high frequency welding combination equipment in the welded pipe unit equipment. The scope of application of this equipment is low carbon and high strength steel pipe (round pipe, rectangular pipe, special-shaped pipe) welding, stainless steel pipe welding, aluminum pipe welding. The applicable welding method is induction welding.
The device is configured for use with 100 high frequency combination devices. The 100 high frequency welding equipment combination mainly includes: 100 rectifitor cabinet, 100 inverter cabinet, 100 cooling device, 100 operating table, 100 speed adjustor.
|Product Information of 100 Rectifitor cabinet|
|① Product number||GGP100-0.45-H||② Product size|
|③ Altitude||Not more than 2000 meters||④ Product name||100 Rectifitor cabinet|
|⑤ Ambient temperature||Not more than +40℃, not lower than -5℃||⑥ Structure type||Floor-standing|
|⑦ Nominal power||100KW||⑧ Rated voltage||450V|
|⑨ Product packaging||Carton and rainproof packaging||⑩ Frequency Range||400~450kHz|
Perfect structure design of 100 Rectifitor cabinet
①The rectifier switchgear is independently designed, and the flexible cable is connected, which is convenient for the user's on-site layout.
②The use of DC rolling wave in the rectifier can ensure that the power factor of the grid side is greater than or equal to 0.92, and the harmonic content is relatively minimal; the use of 12-pulse thyristor rectification* can eliminate the 5th and 7th harmonics on the grid side, and the harmonic current on the grid side is the smallest.
③High-frequency welding equipment is designed with high-standard electromagnetic compatibility, and electromagnetic radiation meets national standards.
④The design of the airtight case meets the requirements of the harsh environment of the user's site.
Features of 100 rectifitor cabinet
The integrated design of the switch cabinet and the rectifier part is realized. In addition to the function of the switch cabinet, it also has the rectification control function of the solid-state high-frequency machine. Realize the functions of remote operation, power adjustment, condition monitoring and fault diagnosis of solid-state high frequency welding machine.
●Install the incoming line knife switch, incoming line ammeter, voltmeter (switchable) and incoming line voltage indicator light.
●Install three-phase fully controlled thyristor rectifier bridge to realize the function adjustment of high frequency welding machine.
●Install smoothing reactance and smoothing capacitor filter to improve the fighting coefficient.
●A variety of AC and DC meters and operation buttons are installed to display the working status of the high-frequency welding machine.
●High-frequency welding equipment has perfect protection function, reliable work and low failure rate.
●It is convenient for users to operate and monitor on site.
|Parameter information of 100 Rectifitor cabinet|
|Num||Parameter name||Parameter information|
|3||Rated DC voltage||450V|
|4||Rated DC current||220A|