100 Operating table
|1||Product number||100 Operating table|
|2||Product brand||BAODING SANYI TIANXING|
The 100 high-frequency operating table is one of the high-frequency welding combined equipment in the welded pipe unit for the production of straight seam welded pipes.The equipment realizes the functions of remote operation, power adjustment, condition monitoring and fault diagnosis of solid-state high-frequency welding machine.
100 Operating table, which is equipped with a human-machine interface system composed of PLC and LCD touch screen, which is convenient for users to operate and monitor on-site button.
The device is configured for use with 100 high frequency combination devices. The 100 high frequency welding equipment combination mainly includes: 100 rectifitor cabinet, 100 inverter cabinet, 100 cooling device, 100 operating table, 100 speed adjustor.
① Confirm that the machinery and process equipment are ready for work, the strip has been brought into place according to the process requirements, and the potentiometers have been reset to zero.
② Power on the high-frequency room: close the air switch of the power cabinet, close the air switch of the power cabinet, and close the air switch of the speed control cabinet.
③Turn on the high-frequency internal circulating cooling water on the 100 operating table, check whether there are leaks in the inverter cabinet, and whether the water pressure is normal (0.2~0.3MPa).
④Turn on the external circulating cooling water of the high-frequency "water-water cooler", and check the condition of the induction coil and the magnetic rod.
⑤100 Operating table: After pressing the operation control of forming and sizing, press the power control button of the operating table for three seconds, press the main circuit, and then press the heating control after three seconds, and then observe the console DC voltmeter and DC ammeter, if the displayed average value is normal, adjust the heating potentiometer and the speed potentiometer to match well, the value of each table rises smoothly, and the equipment is running normally; (Note: If the running button of the speed control console is not pressed If it is down, the electric control interlock makes the heating unable to be sent up).
⑥100 Operating table: press the operation stop button of the speed control console when the machine stops, the vehicle speed will stop at this time, and the heating will stop. power off control button). Only press the emergency stop button in an emergency.
|Parameter information of 100 Operating table|
|Num||Parameter name||Parameter information|
|1||Welder model||100 Operating table|
|3||Operating table height (mm)|
|4||Maximum speed (r/min)|
|5||Rated voltage (V)|
|6||Rated current (A)|