MENU

/
/
What is the common accumulation of burrs in welded pipes produced by used HFW pipe equipment?

What is the common accumulation of burrs in welded pipes produced by used HFW pipe equipment?

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-10-15 11:30
  • Pvs:

【概要描述】Internal burr scraping is an important process for the production of high-frequency welded pipes by used HFW pipe equipments. Due to improper adjustment or operation, accumulation of internal burr scraping occurs during the process of scraping, which in turn affects the scraping quality of internal burrs.

What is the common accumulation of burrs in welded pipes produced by used HFW pipe equipment?

【概要描述】Internal burr scraping is an important process for the production of high-frequency welded pipes by used HFW pipe equipments. Due to improper adjustment or operation, accumulation of internal burr scraping occurs during the process of scraping, which in turn affects the scraping quality of internal burrs.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-10-15 11:30
  • Pvs:
Detail

Internal burr scraping is an important process for the production of high-frequency welded pipes by used HFW pipe equipments. Due to improper adjustment or operation, accumulation of internal burr scraping occurs during the process of scraping, which in turn affects the scraping quality of internal burrs.

 

This paper introduces the types of build-up that appear on the burr knife or the shank in the high-frequency welded pipe, analyzes the reasons for the build-up, and prevents the build-up by observing and judging the build-up during the operation of the used HFW pipe equipments production line. resulting measures.

 

In the production of high-frequency welded pipes by used HFW pipe equipments, the scraping of internal burrs has always been a difficult problem to solve. The scraping quality often causes the production line to fail to operate normally and stop, which reduces the yield of welded pipes. At the same time, a large number of internal burr welded pipes exceeding the standard have brought great difficulties to the subsequent processing and seriously reduced the production efficiency. Therefore, it is necessary to analyze the accumulation problem in the process of internal burr scraping, find out the root cause of the problem, and formulate appropriate countermeasures.

 

There are many methods for removing burrs in high-frequency welded pipes, such as rolling method, grinding method, tool scraping method and other.

 

Tool scraping and deburring is widely used in production due to its high precision, flexible and convenient adjustment, and reliable quality. This paper takes the tool scraping and deburring method as an example to introduce in detail the causes and countermeasures of common accumulation problems in the production of high-frequency welded pipes .

 

Used HFW pipe equipments

 

A clear understanding of the common accumulation of burrs in the welded pipe is very important for the production line of used HFW pipe equipments. At the same time, it is also necessary to solve the problems in the production of welded pipes according to different accumulations. In the next issue, please pay attention to the types of common accumulation of internal burrs when used HFW pipe equipments produces welded pipes.

 

Part of the content of this site comes from the Internet, this site only provides information storage, the copyright belongs to the original author, does not bear relevant legal responsibility, does not represent the views and positions of this site, if there is any infringement, please contact to delete.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn