MENU

/
/
Used welded pipe machine welded pipe production process specification—Packaging logo printing process

Used welded pipe machine welded pipe production process specification—Packaging logo printing process

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-08-02 11:30
  • Pvs:

【概要描述】In the production of used welded pipe machine, it is necessary to know the production process regulations of each equipment in order to operate the used welded pipe machine according to the production process regulations.

Used welded pipe machine welded pipe production process specification—Packaging logo printing process

【概要描述】In the production of used welded pipe machine, it is necessary to know the production process regulations of each equipment in order to operate the used welded pipe machine according to the production process regulations.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-08-02 11:30
  • Pvs:
Detail

In the production of used welded pipe machine, it is necessary to know the production process regulations of each equipment in order to operate the used welded pipe machine according to the production process regulations.

 

The seventh step we first understand the packaging logo printing process of used welded pipe machine

1. According to the number of bundles and the estimation of the weight, use safety-guaranteed steel wire ropes to lift large bundles of steel pipes. The two ropes are generally long and the distance is appropriate. After lifting, the material will be balanced and not shake. It is forbidden to hang one end high and the other low obliquely.

2. Print in accordance with the requirements of the process card.

 

Used welded pipe machine

 

3. Stack the packaged finished steel pipes according to specifications and arrange them neatly, with pads in the middle of each layer, which is convenient for rope threading, which is safe and convenient; the stack should not be too high, generally five layers are appropriate, but the highest is not allowed More than six floors, there is a pedestrian passage between the stacks.

 

After learning the packaging logo printing process, you can use the packaging logo printing process to package the steel pipes of used welded pipe machine.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn