MENU

/
/
Used welded pipe machine welded pipe production process specification—Flat head process

Used welded pipe machine welded pipe production process specification—Flat head process

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-07-27 11:30
  • Pvs:

【概要描述】In the case of the production of used welded pipe machine, it is necessary to know the production process regulations of each equipment in order to operate the used welded pipe machine according to the production process regulations.

Used welded pipe machine welded pipe production process specification—Flat head process

【概要描述】In the case of the production of used welded pipe machine, it is necessary to know the production process regulations of each equipment in order to operate the used welded pipe machine according to the production process regulations.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2023-07-27 11:30
  • Pvs:
Detail

In the case of the production of used welded pipe machine, it is necessary to know the production process regulations of each equipment in order to operate the used welded pipe machine according to the production process regulations.

 

The fifth step we first understand the flat head process of used welded pipe machine

1. Before work, first adjust the specific position of the flat blade according to the specifications and models of the processed steel pipe, replace the corresponding block specifications, and adjust the elevation position of the tooth plate of the walking beam. When installing the tool, you should pay attention to the height of the two milling cutters of each power head to the tool ground as much as possible. When installing, put the tool into the bayonet of the cutter head and lock it with screws. The radial direction should be determined according to the pipe diameter. When the position of the blade needs to be chamfered, adjust the installation angle of the cutter head according to the angle of the chamfer. It should be noted that: the radial position of the chamfering knife should be as accurate as possible, and the roundness of the steel pipe should be higher than the national standard. If necessary, a tool setting model should be used.

 

中国二手焊管设备焊管生产工艺规程——平头工序

 

2. Turn on the power head motor, manually feed, step up, push, step, etc., adjust the position of the power head to return to the set zero position. The position of the zero position is determined by the position of the proximity switch. There are two proximity switches on both sides of the zero position, as the limit position of the power head movement, which plays a protective role. After all actions are confirmed to be correct, manually move the two steel pipes to the pushing position and push them all the way. Pull the switch to the automatic state, and the working process will be carried out automatically at this time. It should be noted that if the parameters have not been tested after setting, it is best to manually complete a few working cycles to verify the practicability of the parameters. When the parameters are approved, it is best to record them for future use. . When the stepping mechanism rotates to send a signal, the solenoid valve of the clamping cylinder is opened, the steel pipe is clamped, and a signal is sent, the power head feeds, and the roller table is opened while clamping, and the steel pipe is pushed and pressed. The program decelerates and stops; when the power head is finished and quickly returns, the solenoid valve of the clamping cylinder changes direction and the clamping is released. For the sake of safety, the change of the proximity switch signal is used to detect the clamp return, and check whether it is returned. If it does not return to the original position, the following actions will not be performed. After returning to the position, the stepping mechanism moves to move the flat-headed steel pipe to the next working position or out, and at the same time move the steel pipe to be processed to the working position, and then perform the flat-head cycle operation according to the above procedure.

 

After learning the flat head process, you can perform the actual operation principle of the steel pipe of used welded pipe machine according to the flat head process.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn