MENU

/
/
Used steel pipe rolling mills, the type of internal burr shape appears when the pipe is made

Used steel pipe rolling mills, the type of internal burr shape appears when the pipe is made

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2021-11-10 11:30
  • Pvs:

【概要描述】The shape of internal burr appears when the used steel pipe rolling mills. There is a certain logical relationship between the shape of the burr in the welded pipe and the welding temperature, extrusion force and welding speed.

Used steel pipe rolling mills, the type of internal burr shape appears when the pipe is made

【概要描述】The shape of internal burr appears when the used steel pipe rolling mills. There is a certain logical relationship between the shape of the burr in the welded pipe and the welding temperature, extrusion force and welding speed.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2021-11-10 11:30
  • Pvs:
Detail

The shape of internal burr appears when the used steel pipe rolling mills. There is a certain logical relationship between the shape of the burr in the welded pipe and the welding temperature, extrusion force and welding speed.

 

The operator can see the essence of the used steel pipe rolling mills through the phenomenon of the shape of the internal and external burrs.

 

The matching of welding process parameters is related to the shape of the transverse internal burr.

 

Used steel pipe rolling mills

 

Transverse internal burr shape: isosceles

Raw material of welded pipe: trimmed pipe blank

Weld butt joint: "I" parallel

Welding temperature: solid phase ~ solid solution

Squeeze force: too large

Welding speed: suitable

 

Used steel pipe rolling mills

 

Horizontal internal burr shape: double peak

Welded pipe raw material: round side tube billet

Weld butt joint: "X" butt joint

Welding temperature: solid phase ~ solid solution

Squeeze force: greater

Welding speed: suitable

 

Used steel pipe rolling mills

 

Horizontal internal burr shape: wedge

Raw material of welded pipe: cut edge/round edge

Weld butt joint: "N" misalignment

Welding temperature: solid melting ~ melting

Squeeze force: moderate

Welding speed: slow

 

Used steel pipe rolling mills

Horizontal internal burr shape: Mushroom

Raw material of welded pipe: cut edge/round edge

Weld butt joint: "I"/ "X"

Welding temperature: melting

Squeeze force: greater

Welding speed: slow

 

Used steeel pipe rolling mills

Horizontal internal burr shape: Centipede

Raw material of welded pipe: cut edge/round edge

Weld butt joint: "I"/ "X"

Welding temperature: melting

Squeeze force: small

Welding speed: slow

 

The above are the types of internal burrs that appear when the second-hand steel pipe is rolled by a machine-made pipe. The essence of the operating state of the used steel pipe rolling mills can be analyzed through the shape of the internal burr.

关键词:

More News

Conduct training of slitting crew
Conduct training of slitting crew
Time of issue : 2024-12-05
Training a slitting crew usually includes the following key steps:

1.Theoretical Training:
Equipment knowledge: Understand the basic components of the slitting unit and its working principle.
Operation specifications: Familiar with the operation procedures, including starting, stopping, adjusting parameters, common problem handling, etc.
Safety training: Understand the safety risks in equipment operation and corresponding preventive measures, and be familiar with emergency handling methods in emergency situations.
2.Practical operation:
On-site operation demonstration: An experienced operator gives a demonstration on site to guide new employees to master basic operating skills.
Hands-on practice: Let new employees operate the equipment themselves, accumulate experience in actual operation, and solve the problems encountered.
3.Maintenance:
Daily inspection: Train employees to understand the contents and methods of daily inspection of equipment, including cleaning, lubrication, fastening and other work.
Troubleshooting: Teach employees how to identify common equipment failures, understand basic troubleshooting methods and when professional maintenance personnel are required to intervene.

4.Efficiency optimization:
Production Management: Explain how to rationally arrange production tasks to improve equipment utilization and production efficiency.
Data Analysis: Teach employees how to record and analyze production data to find and improve the weak links in production.

5.Assessment and continuous improvement:
Assessment: Evaluate the effectiveness of training through examinations or practical assessments to ensure that employees have the necessary knowledge and skills.
Continuous improvement: Regularly organize training review and skill upgrading courses, and constantly improve the training content according to the actual production and equipment update.

After the training, new employees can work under the supervision of an experienced operator until they are fully competent.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Detail
Training a slitting crew usually includes the following key steps:

1.Theoretical Training:
Equipment knowledge: Understand the basic components of the slitting unit and its working principle.
Operation specifications: Familiar with the operation procedures, including starting, stopping, adjusting parameters, common problem handling, etc.
Safety training: Understand the safety risks in equipment operation and corresponding preventive measures, and be familiar with emergency handling methods in emergency situations.
2.Practical operation:
On-site operation demonstration: An experienced operator gives a demonstration on site to guide new employees to master basic operating skills.
Hands-on practice: Let new employees operate the equipment themselves, accumulate experience in actual operation, and solve the problems encountered.
3.Maintenance:
Daily inspection: Train employees to understand the contents and methods of daily inspection of equipment, including cleaning, lubrication, fastening and other work.
Troubleshooting: Teach employees how to identify common equipment failures, understand basic troubleshooting methods and when professional maintenance personnel are required to intervene.

4.Efficiency optimization:
Production Management: Explain how to rationally arrange production tasks to improve equipment utilization and production efficiency.
Data Analysis: Teach employees how to record and analyze production data to find and improve the weak links in production.

5.Assessment and continuous improvement:
Assessment: Evaluate the effectiveness of training through examinations or practical assessments to ensure that employees have the necessary knowledge and skills.
Continuous improvement: Regularly organize training review and skill upgrading courses, and constantly improve the training content according to the actual production and equipment update.

After the training, new employees can work under the supervision of an experienced operator until they are fully competent.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Looper motors are commonly used in steel rolling lines in the metalworking industry
Looper motors are commonly used in steel rolling lines in the metalworking industry
Looper motors are commonly used in steel rolling lines in the metalworking industry, especially in the production of strips, sheets and tubes. Its main function is to coordinate the movement of the workpiece, maintain a constant tension, and make the strip smooth transition between different processes. The following is the use of looper clip motor and precautions:

1.Installation and commissioning:
Position selection: According to the layout and process requirements of the production line, the installation position of the looping clip motor is reasonably selected.
Fixed and connected: Install the motor firmly in the designated position, and connect it with the corresponding mechanical transmission components.
Electrical wiring: Correct wiring to ensure reliable connection between the motor and the control system.

2.Start and Stop:
Check before starting: Check the lubrication state of the motor and transmission parts, whether the fasteners are loose, and whether the electrical line is normal.
Smooth start: When starting the motor, it should avoid the impact of instantaneous large current, and use soft start or frequency conversion start.
Normal shutdown: The shutdown should gradually reduce the speed of the motor to prevent sudden stop from impacting the equipment.

3.Operation and control:
Constant tension: The tension control system is used to maintain a constant tension during the operation of the looping motor to avoid strip relaxation or pulling.
Speed synchronization: Adjust the running speed of the motor according to the process requirements, so that it matches the speed of the equipment before and after the process.
Feedback control: Through the sensor and feedback system, real-time monitoring of the motor operating status, adjust the parameters to ensure the stable operation of the production line.

4.Maintenance and maintenance:
Regular inspection: Regularly check the wear of the motor and transmission parts, and replace the damaged parts in time.
Lubrication maintenance: Regular lubrication maintenance of mechanical parts to ensure their good operation.
Clean and dust-proof: Keep the motor and control cabinet clean to prevent dust and debris from entering, affecting the performance of the equipment.

5.Troubleshooting:
Fault diagnosis: When there is a fault, professional detection equipment is used to diagnose the motor and determine the cause of the fault.
Timely repair: Repair or replace the fault part according to the diagnosis results to ensure that the equipment returns to normal work as soon as possible.

In short, the correct use and maintenance of the looper clip motor is crucial to ensure the efficient and stable operation of the metal processing line.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Detail
Looper motors are commonly used in steel rolling lines in the metalworking industry, especially in the production of strips, sheets and tubes. Its main function is to coordinate the movement of the workpiece, maintain a constant tension, and make the strip smooth transition between different processes. The following is the use of looper clip motor and precautions:

1.Installation and commissioning:
Position selection: According to the layout and process requirements of the production line, the installation position of the looping clip motor is reasonably selected.
Fixed and connected: Install the motor firmly in the designated position, and connect it with the corresponding mechanical transmission components.
Electrical wiring: Correct wiring to ensure reliable connection between the motor and the control system.

2.Start and Stop:
Check before starting: Check the lubrication state of the motor and transmission parts, whether the fasteners are loose, and whether the electrical line is normal.
Smooth start: When starting the motor, it should avoid the impact of instantaneous large current, and use soft start or frequency conversion start.
Normal shutdown: The shutdown should gradually reduce the speed of the motor to prevent sudden stop from impacting the equipment.

3.Operation and control:
Constant tension: The tension control system is used to maintain a constant tension during the operation of the looping motor to avoid strip relaxation or pulling.
Speed synchronization: Adjust the running speed of the motor according to the process requirements, so that it matches the speed of the equipment before and after the process.
Feedback control: Through the sensor and feedback system, real-time monitoring of the motor operating status, adjust the parameters to ensure the stable operation of the production line.

4.Maintenance and maintenance:
Regular inspection: Regularly check the wear of the motor and transmission parts, and replace the damaged parts in time.
Lubrication maintenance: Regular lubrication maintenance of mechanical parts to ensure their good operation.
Clean and dust-proof: Keep the motor and control cabinet clean to prevent dust and debris from entering, affecting the performance of the equipment.

5.Troubleshooting:
Fault diagnosis: When there is a fault, professional detection equipment is used to diagnose the motor and determine the cause of the fault.
Timely repair: Repair or replace the fault part according to the diagnosis results to ensure that the equipment returns to normal work as soon as possible.

In short, the correct use and maintenance of the looper clip motor is crucial to ensure the efficient and stable operation of the metal processing line.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Apply of Bedroom screw looping
Apply of Bedroom screw looping
Time of issue : 2024-12-03
Bedroom screw looping (generally used in the field of metal working, such as steel rolling) is a device used for specific processing operations. Used roller bedroom spiral looper can still work effectively after proper maintenance and debugging. Its operation mainly includes the following aspects:

1.Basic construction: A typical roller type bedroom spiral hoop usually consists of two sets of rollers that form a spiral shaped channel for guiding and supporting the metal strip.

2.Operation principle: When the metal strip passes through the looper, the strip is guided and supported in the spiral path. Due to the spiral structure of the looper, the strip can be smoothly transmitted under the condition of uneven strip speed to ensure the normal progress of the subsequent process.

3.Commissioning and maintenance: Used equipment needs to be inspected and maintained in detail before use. Includes:
Cleaning: Remove oil, dust and so on from the surface.
Lubrication: Check and add lubricating oil to ensure the normal operation of each transmission component.
Calibration: Ensure that the neutralization pressure of the roller is set correctly.
Replacement parts: Check for wear and replace necessary parts.

4.Application process: In the process of use, it is necessary to pay attention to the operation specifications, monitor the operating status of the equipment, and adjust the equipment parameters in time to meet the strip specifications and process requirements. In addition, it is also necessary to pay attention to safe operation to prevent accidents.

Through the above methods, the used roller bedroom spiral looper can continue to play its function and provide support for metal processing production.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Detail
Bedroom screw looping (generally used in the field of metal working, such as steel rolling) is a device used for specific processing operations. Used roller bedroom spiral looper can still work effectively after proper maintenance and debugging. Its operation mainly includes the following aspects:

1.Basic construction: A typical roller type bedroom spiral hoop usually consists of two sets of rollers that form a spiral shaped channel for guiding and supporting the metal strip.

2.Operation principle: When the metal strip passes through the looper, the strip is guided and supported in the spiral path. Due to the spiral structure of the looper, the strip can be smoothly transmitted under the condition of uneven strip speed to ensure the normal progress of the subsequent process.

3.Commissioning and maintenance: Used equipment needs to be inspected and maintained in detail before use. Includes:
Cleaning: Remove oil, dust and so on from the surface.
Lubrication: Check and add lubricating oil to ensure the normal operation of each transmission component.
Calibration: Ensure that the neutralization pressure of the roller is set correctly.
Replacement parts: Check for wear and replace necessary parts.

4.Application process: In the process of use, it is necessary to pay attention to the operation specifications, monitor the operating status of the equipment, and adjust the equipment parameters in time to meet the strip specifications and process requirements. In addition, it is also necessary to pay attention to safe operation to prevent accidents.

Through the above methods, the used roller bedroom spiral looper can continue to play its function and provide support for metal processing production.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
The mold types and types of used precision high-frequency welded pipe units
The mold types and types of used precision high-frequency welded pipe units
The mold types and types of second-hand precision high-frequency welded pipe units mainly include the following:

1.Molding die: used to shape steel strip into pipe. This type of mold usually consists of multiple sets of rollers, and the forming process is completed by gradual pressure.

2.Welding die: Specially used for high-frequency welding process to ensure the quality and accuracy of the weld. These molds are often used to ensure that the joint parts of the pipe are precisely aligned and soldered securely.

3.Sizing die: used for further sizing and straightening of the pipe after welding to ensure the dimensional accuracy of the final product. These molds allow the pipe to achieve the desired diameter and roundness.

4.Shaping mold: used to shape the welded pipe that has been formed to ensure that it meets the specified size and shape requirements.

5.Straightening mold: used to straighten the welded pipe and correct the bending and deformation of the pipe to ensure its flatness in the production process.

6.Surface treatment mold: These molds are used to treat the surface of the pipe, such as deburring, polishing, etc., to ensure the smooth and smooth surface of the pipe.

7.Cutting mold: used to cut the produced welded pipe to the required length according to demand. The main function of these molds is to ensure that the cutting is straight and high precision.

Each mold plays an important role in the production process, ensuring the quality and production efficiency of the welded pipe. According to the specific use and needs, different types of molds can be combined to achieve the best production results.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Detail
The mold types and types of second-hand precision high-frequency welded pipe units mainly include the following:

1.Molding die: used to shape steel strip into pipe. This type of mold usually consists of multiple sets of rollers, and the forming process is completed by gradual pressure.

2.Welding die: Specially used for high-frequency welding process to ensure the quality and accuracy of the weld. These molds are often used to ensure that the joint parts of the pipe are precisely aligned and soldered securely.

3.Sizing die: used for further sizing and straightening of the pipe after welding to ensure the dimensional accuracy of the final product. These molds allow the pipe to achieve the desired diameter and roundness.

4.Shaping mold: used to shape the welded pipe that has been formed to ensure that it meets the specified size and shape requirements.

5.Straightening mold: used to straighten the welded pipe and correct the bending and deformation of the pipe to ensure its flatness in the production process.

6.Surface treatment mold: These molds are used to treat the surface of the pipe, such as deburring, polishing, etc., to ensure the smooth and smooth surface of the pipe.

7.Cutting mold: used to cut the produced welded pipe to the required length according to demand. The main function of these molds is to ensure that the cutting is straight and high precision.

Each mold plays an important role in the production process, ensuring the quality and production efficiency of the welded pipe. According to the specific use and needs, different types of molds can be combined to achieve the best production results.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn