MENU

/
/
Used square pipe machines, adjust the welding seam position of making square rectangular pipe (1)

Used square pipe machines, adjust the welding seam position of making square rectangular pipe (1)

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2021-12-08 11:30
  • Pvs:

【概要描述】Judging that the quality of the square tube produced by the used square tube machines meets the standard is based on a large number of inspection data of the microhardness of the weld and the microhardness of the base material. The former is much higher than the latter. It is for this reason that the weld is usually not placed at a positive angle, but placed within t~(t+5mm) from the corner edge to reduce the risk of weld cracks. This requires effective control of the weld position. Control methods include forming roll method, guide roll method and sizing roll method.

Used square pipe machines, adjust the welding seam position of making square rectangular pipe (1)

【概要描述】Judging that the quality of the square tube produced by the used square tube machines meets the standard is based on a large number of inspection data of the microhardness of the weld and the microhardness of the base material. The former is much higher than the latter. It is for this reason that the weld is usually not placed at a positive angle, but placed within t~(t+5mm) from the corner edge to reduce the risk of weld cracks. This requires effective control of the weld position. Control methods include forming roll method, guide roll method and sizing roll method.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2021-12-08 11:30
  • Pvs:
Detail

Judging that the quality of the square tube produced by the used square tube machines meets the standard is based on a large number of inspection data of the microhardness of the weld and the microhardness of the base material. The former is much higher than the latter. It is for this reason that the weld is usually not placed at a positive angle, but placed within t~(t+5mm) from the corner edge to reduce the risk of weld cracks. This requires effective control of the weld position. Control methods include forming roll method, guide roll method and sizing roll method.

 

Used square pipe machines

 

The following is an introduction to the forming roll method and the guide roll method for the control methods of the welding seam position of the square rectangular tube produced by the used square tube machines.

 

Forming roll method

The control principle is to roll a certain side of the tube billet more heavily by forming a solid roll, so that the longitudinal fibers of the parent material on this side can be extended, so that in the subsequent welding, cooling and forced equal length processes, more than the other is formed. The longitudinal strain and longitudinal tensile stress on one side, in this way, the weld will be pushed to the side where the longitudinal strain extension and stress are small, and then the purpose of controlling the position of the weld will be achieved. However, using the forming roll method to control the position of the weld is slow in response and it is not easy to accurately control the offset of the weld.

 

Guide roller method

By changing the pass of the guide roll and the position of the rolling center line, the position of the weld seam in the sizing section can be controlled. There are two types: deflection method and offset method.

 

(1) Deflection method. Based on the rolling center line, the guide roller is deflected to the left or right by a certain angle, so as to force the tube blank in the pass to deflect to the left or right.

The control principle is that because the pipe is welded with a rigid body, when a torsion force is applied to the pipe at the guide roller, the torsion is transmitted along the pipe body to the sizing direction, forcing the pipe body to twist in the same direction, thereby driving the weld deflection. The amount of deflection is closely related to the deflection angle, wall thickness, etc. A large deflection angle results in a large deflection amount; a thick wall and the same deflection angle can achieve a large amount of deflection. The advantage of the deflection method is high control sensitivity, the larger the tube, the thicker the wall, the more positive the response, and the deflection is easy to control; the disadvantage is that it sometimes affects the butt joint state of the weld and the removal of external burrs, and needs to be adjusted accordingly.

 

(2) Offset method.The principle of the offset method to control the position of the sizing weld is that if the guide roll is shifted to the right of the rolling centerline, the welded pipe will receive a leftward thrust in the squeeze roll, which is combined with the traction on the tube blank After that, a force to the left and front is formed. This force forces the pipe body, including the weld seam, to deflect to the left. The advantages and disadvantages of the offset method are similar to those of the deflection method, but the action response is more sensitive than that of the deflection method. From the adjustment practice, the offset method is the best way to control the position of the thin-walled pipe weld.

 

Used square pipe machines

 

Adjust the welding seam position of the square tube produced by the used square tube machines through the two control methods of the forming roller method and the guide roller method, but it must be judged and adjusted according to the actual situation.

 

What needs special explanation is:

The roll offset is generally only a few tenths of a millimeter to 1~2mm (the smaller the tube is, the smaller the value is), and usually will not crush the tube surface; if the tube surface is indented due to it, this method should be abandoned.

 

The above-mentioned methods for controlling the position of the weld seam can be used alone or in combination, not only for special-shaped pipes, but also for round pipes.

关键词:

More News

Application of high precision steel pipe produced by pipe welding machine in modern industry
Application of high precision steel pipe produced by pipe welding machine in modern industry
The high-precision steel pipe produced by pipe welding machine is widely used in modern industry, and its production process and quality control requirements are strict. The following is a summary of the relevant technical points and application scenarios:

1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.

2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).

3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).

4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).

5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).

6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.

Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
Detail
The high-precision steel pipe produced by pipe welding machine is widely used in modern industry, and its production process and quality control requirements are strict. The following is a summary of the relevant technical points and application scenarios:

1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.

2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).

3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).

4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).

5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).

6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.

Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
The relationship between pipe welding machine and automobile frame manufacturing
The relationship between pipe welding machine and automobile frame manufacturing
The relationship between pipe welding machine and automobile frame manufacturing is mainly reflected in the production process, material selection and process optimization. The following is a technical analysis of the relationship between the two:

1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.

2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).

3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.

4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).

5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.

Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes

It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
Detail
The relationship between pipe welding machine and automobile frame manufacturing is mainly reflected in the production process, material selection and process optimization. The following is a technical analysis of the relationship between the two:

1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.

2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).

3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.

4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).

5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.

Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes

It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
89 Pipe welding machine is used to produce steel pipes for highway fences
89 Pipe welding machine is used to produce steel pipes for highway fences
89 Pipe welding machine is a kind of equipment specially used for the production of welded steel pipes. It is very important in the production of steel pipes for highway fences:



89 The working principle of the pipe welding machine 89 The pipe welding machine uncoils the steel strip, feeds and welds it into a round steel pipe, and then cools, straightens and cuts the steel pipe to the required length. The main steps include:

1. Uncoiling: Unroll the steel strip from the drum and level it through the straightener.

2. Forming: The steel strip is rolled into a tube shape through a series of roller wheels.

3. Welding: high frequency current is used to heat the joint of the steel strip, so as to weld the steel pipe.

4. Cooling: The welded steel pipe is cooled by cooling equipment.

5. Straightening and cutting: Finally, straighten and cut the steel pipe to the required length.



The main steel pipe used in the highway fence needs to have a certain strength and impact resistance, but also corrosion resistance. Specific features include:

1. High strength: the steel pipe must be able to withstand the impact to ensure the safety of the highway.

2. Corrosion resistance: steel pipes are usually galvanized to enhance their corrosion resistance and adapt to harsh outdoor environments.

3. Standard size: The steel pipe produced generally has strict size requirements to ensure the stability of the fixed connection of each fence.



The steel pipe produced by the 89 pipe welding machine plays a skeleton role in the highway fence, and its application is reflected in:

1. Guardrail: installed on both sides of the highway or in the middle, to prevent the vehicle from losing control of the road, to protect the safety of the driver.

2. Isolation belt: Set isolation belts between lanes in different directions to prevent vehicles from crossing lanes and reduce the incidence of accidents.

3. Sound barrier: The use of steel pipe frame to support the sound barrier plate to reduce the impact of road noise on the surrounding environment.



In short, the 89 pipe welding machine plays a key role in the production of steel pipes for highway fences, ensuring the stability, durability and safety of the fences, thus providing a reliable guarantee for the safe operation of the highways.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
Detail
89 Pipe welding machine is a kind of equipment specially used for the production of welded steel pipes. It is very important in the production of steel pipes for highway fences:



89 The working principle of the pipe welding machine 89 The pipe welding machine uncoils the steel strip, feeds and welds it into a round steel pipe, and then cools, straightens and cuts the steel pipe to the required length. The main steps include:

1. Uncoiling: Unroll the steel strip from the drum and level it through the straightener.

2. Forming: The steel strip is rolled into a tube shape through a series of roller wheels.

3. Welding: high frequency current is used to heat the joint of the steel strip, so as to weld the steel pipe.

4. Cooling: The welded steel pipe is cooled by cooling equipment.

5. Straightening and cutting: Finally, straighten and cut the steel pipe to the required length.



The main steel pipe used in the highway fence needs to have a certain strength and impact resistance, but also corrosion resistance. Specific features include:

1. High strength: the steel pipe must be able to withstand the impact to ensure the safety of the highway.

2. Corrosion resistance: steel pipes are usually galvanized to enhance their corrosion resistance and adapt to harsh outdoor environments.

3. Standard size: The steel pipe produced generally has strict size requirements to ensure the stability of the fixed connection of each fence.



The steel pipe produced by the 89 pipe welding machine plays a skeleton role in the highway fence, and its application is reflected in:

1. Guardrail: installed on both sides of the highway or in the middle, to prevent the vehicle from losing control of the road, to protect the safety of the driver.

2. Isolation belt: Set isolation belts between lanes in different directions to prevent vehicles from crossing lanes and reduce the incidence of accidents.

3. Sound barrier: The use of steel pipe frame to support the sound barrier plate to reduce the impact of road noise on the surrounding environment.



In short, the 89 pipe welding machine plays a key role in the production of steel pipes for highway fences, ensuring the stability, durability and safety of the fences, thus providing a reliable guarantee for the safe operation of the highways.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
Purchase used pipe making machine
Purchase used pipe making machine
Time of issue : 2025-01-23
When purchasing used pipe making machines, you can consider the following points:

1.Supply channels:
Online marketplaces: For example, Taobao, Alibaba, Jingdong and other platforms can search and find used equipment.
Professional used equipment market: Some areas have a special used equipment market, you can view the equipment situation on the spot.
Industry exhibitions: Participate in machinery, manufacturing related exhibitions, sometimes you can find suppliers to provide second-hand equipment opportunities.
Peers and recommendations: Ask peers and friends in the industry to obtain reliable equipment and supplier information.

2.Selection criteria:
Equipment condition: Carefully check the service life, maintenance records and running status of the equipment to ensure that the function is intact.
Brand and model: Choose well-known brands and reliable models, usually the quality is guaranteed, and the after-sales service is relatively perfect.
Price comparison: multiple inquiries to ensure reasonable prices to avoid buying inferior equipment at low prices.
Service and Accessories: Find out if the supplier provides after-sales service and accessories to ensure convenient maintenance in subsequent use.

3.Site inspection:
Equipment operation demonstration: The seller is required to perform equipment operation demonstration to observe the actual operation.
Technical Support: Evaluate the seller's technical support capabilities, including whether to provide installation and commissioning services.
Contract protection: Sign a detailed procurement contract to clarify the responsibilities of both parties, equipment specifications, payment methods, after-sales service and other content.

4.Trial Period:
Trial commitment: Try to strive for a certain trial period in order to find potential problems with the equipment during use.
Troubleshooting: During the trial period, pay close attention to the operation of the equipment, if there is a failure, contact the seller as soon as possible.

Through the above methods, you can better purchase a satisfactory second-hand pipe making machine.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
Detail
When purchasing used pipe making machines, you can consider the following points:

1.Supply channels:
Online marketplaces: For example, Taobao, Alibaba, Jingdong and other platforms can search and find used equipment.
Professional used equipment market: Some areas have a special used equipment market, you can view the equipment situation on the spot.
Industry exhibitions: Participate in machinery, manufacturing related exhibitions, sometimes you can find suppliers to provide second-hand equipment opportunities.
Peers and recommendations: Ask peers and friends in the industry to obtain reliable equipment and supplier information.

2.Selection criteria:
Equipment condition: Carefully check the service life, maintenance records and running status of the equipment to ensure that the function is intact.
Brand and model: Choose well-known brands and reliable models, usually the quality is guaranteed, and the after-sales service is relatively perfect.
Price comparison: multiple inquiries to ensure reasonable prices to avoid buying inferior equipment at low prices.
Service and Accessories: Find out if the supplier provides after-sales service and accessories to ensure convenient maintenance in subsequent use.

3.Site inspection:
Equipment operation demonstration: The seller is required to perform equipment operation demonstration to observe the actual operation.
Technical Support: Evaluate the seller's technical support capabilities, including whether to provide installation and commissioning services.
Contract protection: Sign a detailed procurement contract to clarify the responsibilities of both parties, equipment specifications, payment methods, after-sales service and other content.

4.Trial Period:
Trial commitment: Try to strive for a certain trial period in order to find potential problems with the equipment during use.
Troubleshooting: During the trial period, pay close attention to the operation of the equipment, if there is a failure, contact the seller as soon as possible.

Through the above methods, you can better purchase a satisfactory second-hand pipe making machine.

For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com

JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill 
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn