MENU

/
/
Used high frequency tube mills, common problems of high-frequency welding (2)——How to judge the edge shape of strip steel

Used high frequency tube mills, common problems of high-frequency welding (2)——How to judge the edge shape of strip steel

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2021-10-29 11:30
  • Pvs:

【概要描述】The used high frequency tube mills is the core equipment of the entire HFW production line, and it is also the equipment with the highest technical requirements. If it is adjusted improperly, it will directly affect the quality of the welded pipe. This article takes five-roll extrusion welding as an example to introduce the used high-frequency tube mills in detail. Common problems of high-frequency welding of machines (2)--How to judge the shape of the strip edge.

Used high frequency tube mills, common problems of high-frequency welding (2)——How to judge the edge shape of strip steel

【概要描述】The used high frequency tube mills is the core equipment of the entire HFW production line, and it is also the equipment with the highest technical requirements. If it is adjusted improperly, it will directly affect the quality of the welded pipe. This article takes five-roll extrusion welding as an example to introduce the used high-frequency tube mills in detail. Common problems of high-frequency welding of machines (2)--How to judge the shape of the strip edge.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2021-10-29 11:30
  • Pvs:
Detail

The used high frequency tube mills is the core equipment of the entire HFW production line, and it is also the equipment with the highest technical requirements. If it is adjusted improperly, it will directly affect the quality of the welded pipe. This article takes five-roll extrusion welding as an example to introduce the used high-frequency tube mills in detail. Common problems of high-frequency welding of machines (2)--How to judge the shape of the strip edge.

 

Strip edge forming form

 

Used high frequency tube mills

 

Used high frequency tube mills

 

Method for judging the shape of the strip edge of the used high frequency tube mills:

① Semi-welding test

Take a half-welded sample at high frequency. The so-called half-welded sample is the transition from the butt-welded plate edge to the welded fusion state.

 

Used high frequency tube mills

 

Using a flattening test machine, the semi-welded sample was fractured along the weld direction, revealing two brightly colored areas: the welded fusion zone and the unfused zone (Figure 8). The fracture of the fusion zone was silver-white, and the unfused zone was blue-black. The junction of the two areas is a C-shaped curve.

 

Used high frequency tube mills

 

Observe the degree of the upper and lower streamline angles of high-frequency welding metallography.

Generally, the lower streamline angle is larger than the upper streamline angle, which is a positive V-shape, the upper streamline angle is equal or close to the I-shape, and the upper streamline angle is larger than the lower streamline angle and is an inverted V-shape.

 

The above problems are how to judge the shape of the strip edge during high-frequency welding of the used high frequency tube mills. I hope to give you effective help.

 

Part of the content of this site comes from the Internet. This site only provides information storage. The copyright belongs to the original author. It does not bear the relevant legal responsibility and does not represent the views and positions of this site. Please contact and delete it if there is any infringement.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn