MENU

/
/
Types of burr removal tool bars in used high-frequency welded pipe equipments

Types of burr removal tool bars in used high-frequency welded pipe equipments

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2022-03-22 11:30
  • Pvs:

【概要描述】There are three types of internal burr removal toolholders for used high-frequency welded pipe equipments: ①Mechanical internal burr removal toolholders. ②Pneumatic internal burr removal tool holder. ③Hydraulic internal burr removal tool holder.

Types of burr removal tool bars in used high-frequency welded pipe equipments

【概要描述】There are three types of internal burr removal toolholders for used high-frequency welded pipe equipments: ①Mechanical internal burr removal toolholders. ②Pneumatic internal burr removal tool holder. ③Hydraulic internal burr removal tool holder.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2022-03-22 11:30
  • Pvs:
Detail

In the production of high-frequency welded pipes by used high-frequency welded pipe equipments, the removal of internal burrs has always been a difficult problem to solve, especially for small-diameter welded pipes. Larger and medium-diameter welded pipes are more prone to internal burr scraping, excessive or too small and insufficient scraping. Clean and other problems seriously affect the scraping quality of internal burrs and the quality of welded pipes. By briefly introducing the type of inner burr arbor and the structure of the small diameter HFW arbor, the author puts forward the common problems and solutions of the inner burr removal of the small diameter HFW welded pipe according to the production practice.

 

Types of Internal Burr Removal Toolholders

There are three types of internal burr removal toolholders for used high-frequency welded pipe equipments: ①Mechanical internal burr removal toolholders. ②Pneumatic internal burr removal tool holder. ③Hydraulic internal burr removal tool holder.

 

① Mechanical internal burr removal tool holder. The lower roller of this type of cutter bar has an adjustable top wire to fix the height, and when removing the burr in the steel pipe with the standard 76~114mm, a mechanical cutter bar and a buffer spring are required.

 

The advantages of this type of tool holder: fixed size, simple structure, easy maintenance.

Disadvantages: Internal burr removal is unstable, poor compatibility. For products that do not require high internal burr removal accuracy, the strength of the steel pipe after removal is low.

 

Used high-frequency welded pipe equipments

 

② Pneumatic internal burr removal toolholder. The lower roller of this type of cutter bar is controlled by adjustable air pressure, which is relatively stable when removing internal burrs, and has a simple structure and convenient maintenance. It is suitable for products that require high internal burr removal accuracy. However, it has the disadvantage of poor compatibility, and cannot remove high-strength steel pipes due to the limitation of air pressure.

 

Used high-frequency welded pipe equipments

 

③ Hydraulic internal burr removal toolholder. The lower roller of this type of cutter bar is controlled by adjustable oil pressure, so its working stability is good, and it is suitable for steel pipes, precision pipes and high-strength steel pipes that require high internal burr accuracy. However, its structure is complex, and the machining and manufacturing requirements of the tool holder are high.

 

Different used high-frequency welded pipe equipments has different ways of removing internal burrs. The cutter bar can effectively remove the burrs in the welded pipe, and it is what we need to make a qualified welded pipe.

 

Part of the content of this site comes from the Internet. This site only provides information storage. The copyright belongs to the original author. It does not bear the relevant legal responsibility and does not represent the views and positions of this site. Please contact and delete it if there is any infringement.

关键词:

More News

Welded pipe straightening method of used welded pipe machines
Welded pipe straightening method of used welded pipe machines
The problem of straightening the welded pipe often occurs when the used welded pipe machines is used to make pipes. For the straightening of welded pipes, we will explain to you how to make the pipes straightened by used welded pipe machines. Pay attention to the following requirements.
Detail
The problem of straightening the welded pipe often occurs when the used welded pipe machines is used to make pipes. For the straightening of welded pipes, we will explain to you how to make the pipes straightened by used welded pipe machines. Pay attention to the following requirements.
Common faults of used welded pipe units
Common faults of used welded pipe units
There are relatively many failures of used welded pipe machines, and the causes of failures are also more complicated. Often, one result is caused by multiple reasons, or one cause can cause several results. Some failures are tricky to deal with. Let's start with a brief description of the scratch accident.
Detail
There are relatively many failures of used welded pipe machines, and the causes of failures are also more complicated. Often, one result is caused by multiple reasons, or one cause can cause several results. Some failures are tricky to deal with. Let's start with a brief description of the scratch accident.
Common faults of used welded pipe mills production line forming machines (5)
Common faults of used welded pipe mills production line forming machines (5)
Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ③ "indenter" phenomenon.
Detail
Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ③ "indenter" phenomenon.
Common faults of used welded pipe mills production line forming machines (4)
Common faults of used welded pipe mills production line forming machines (4)
Common faults of used welded pipe mills production line forming machines can be divided into ① deviation. ② scratches. ③ "indenter" phenomenon. ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ② scratches.
Detail
Common faults of used welded pipe mills production line forming machines can be divided into ① deviation. ② scratches. ③ "indenter" phenomenon. ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ② scratches.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn