• Sort：Information
• Auth:
• Source:
• Release time：2024-12-21 09:52
• Pvs：

【概要描述】The technical parameters and maintenance training of used steel pipe hydraulic presses are two very important aspects, especially when buying or using such equipment. The following will be introduced: Before purchasing used equipment, it is very important to understand its technical parameters, so as to ensure that the equipment meets the production needs. The following are some common technical parameters: 1.Maximum pressing force: The maximum pressure that the equipment can exert, usually in tons (T). 2.Table size: The size of the table of the hydraulic press, usually expressed in length and width, in millimeters (mm). 3.Cylinder stroke: The maximum stroke of the cylinder, that is, the maximum distance that the cylinder can push, in millimeters (mm). 4.Power: The power of the motor, usually in kilowatts (kW). 5.System pressure: The working pressure of the hydraulic system, the unit is MPa. 6.Working speed: including empty stroke speed, working speed and return speed, etc., the unit is mm/s (mm/s). 7.Height of the mold frame: the maximum height and minimum height of the mold frame, in millimeters (mm). Second, the used steel pipe hydraulic press maintenance training used equipment due to the use of a long time, there may be a certain wear or failure. Before use, it is very necessary to carry out proper repair and maintenance. Maintenance training includes but is not limited to the following aspects: 1.Safe operation procedures: Understand the operating procedures of the equipment, including pre-startup check, precautions in operation, and common troubleshooting methods. 2.Hydraulic system maintenance: Hydraulic system is the core part of hydraulic press, training content should include oil replacement and filtration, pipeline inspection and replacement, hydraulic cylinder overhaul and maintenance. 3.Electrical system maintenance: electrical system maintenance such as electrical control line inspection, connector fastening, motor maintenance, etc. 4.Maintenance of mechanical parts: inspection and lubrication of mechanical parts such as workbench, mold frame, guide rail, fastening of bolts, etc. 5.Common fault diagnosis and elimination: The common faults that may occur in the equipment, and how to diagnose and eliminate them. Failure types such as insufficient hydraulic system pressure, oil cylinder oil leakage, motor overheating. 6.Spare parts replacement and management: Know which spare parts are prone to wear or failure, need regular inspection and replacement, spare parts management and inventory records. Through detailed technical parameter understanding and comprehensive maintenance training, you can better use and maintain the second-hand steel pipe hydraulic press, thereby improving production efficiency and equipment service life. For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill