Used Pipe Mill Supplier
Solution for thick wall tube forming of used round pipe to square pipe machines（2）
- Sort：Information
- Auth:
- Source:
- Release time：2023-06-03 11:30
- Pvs：
【概要描述】In the welded pipe industry, people generally regard welded pipes with a wall thickness to outside diameter (thickness-to-diameter ratio) of 12%≤t/D≤18% as thick-walled pipes. Difficulties in used round pipe to square pipe machines, clearly put forward the adjustment methods of thick-walled tube forming.
Solution for thick wall tube forming of used round pipe to square pipe machines（2）
【概要描述】In the welded pipe industry, people generally regard welded pipes with a wall thickness to outside diameter (thickness-to-diameter ratio) of 12%≤t/D≤18% as thick-walled pipes. Difficulties in used round pipe to square pipe machines, clearly put forward the adjustment methods of thick-walled tube forming.
- Sort：Information
- Auth:
- Source:
- Release time：2023-06-03 11:30
- Pvs：
Detail
In the welded pipe industry, people generally regard welded pipes with a wall thickness to outside diameter (thickness-to-diameter ratio) of 12%≤t/D≤18% as thick-walled pipes. Difficulties in used round pipe to square pipe machines, clearly put forward the adjustment methods of thick-walled tube forming.
(1) Special attention should be paid to the deformation of the first flat roller of the used round pipe to square pipe machines. Including two aspects of reduction and symmetry. In particular, the reduction amount should be too large, and strive to be crushed, because from the perspective of pass design, such as W deformation, edge deformation, double-radius deformation, etc., the actual rolling of the edge of the tube billet is the best!
(2) Vertical roller pull plate must be used. This is determined by the structural characteristics of the vertical roller shaft and the deformation characteristics of the thick-walled tube. The vertical roller shaft pull plate is needed to strengthen the deformation of the tube blank.
(3) The reduction of the closed-hole type flat roll should be too large, in order not to hinder welding and sizing as the principle.
(4) Strictly control the angle of the closed hole guide ring to make it slightly larger than the angle formed by the thickness of the two edges of the tube blank, so as not to damage the edge shape of the tube blank.
(5) Pay attention to surface quality control. Thick-walled pipes have a large rebound, and it is difficult to enter the hole pattern, and it is easy to produce crushing, indentation and roll marks. Pay attention to the treatment and adjustment of these defects.
The above is a solution to the thick-walled tube forming of the used round pipe to square pipe machines, and proposes the adjustment methods of thick-walled tube forming, hoping to provide you with effective help.
Part of the content of this site comes from the Internet. This site only provides information storage. The copyright belongs to the original author. It does not bear the relevant legal responsibility and does not represent the views and positions of this site. Please contact and delete it if there is any infringement.
关键词：
More News
Analysis of seven key factors affecting the effective power output of second-hand high-frequency welded pipe machines
Time of issue : 2024-08-25
High frequency welded pipe machine is widely used in modern industry, especially in the pipe manufacturing industry. It is highly favored by users for its high efficiency and precision. In order to better understand and master this technology, this article will use the keyword "second-hand welded pipe machine" and combine it with practical applications to analyze the seven key factors of its effective power output.
Firstly, we need to clarify the definition of 'second-hand welded pipe machine'. Second hand welded pipe machine refers to equipment that has been used but has been repaired and debugged before being put back into use. Due to its newer production technology and lower purchasing costs, it has become an ideal choice for many small and medium-sized enterprises. However, understanding the influencing factors of power output issues that arise during use, especially in high-frequency and high-intensity operating environments, is crucial.
1. The aging degree of the equipment itself: The components of the second-hand welding pipe machine will wear and age to varying degrees over time, which directly affects the stability of its power output. The maintenance and regular inspection of equipment can reduce this impact.
2. Operating environment: Factors such as humidity, temperature, and electromagnetic interference also have a significant impact on the operation of second-hand welded pipe machines. Maintaining a good working environment is crucial for the effective power output of equipment.
3. Debugging and Calibration: Before the second-hand welded pipe machine is put back into use, it needs to undergo strict debugging and calibration to ensure that all parameters reach their optimal state. This has a significant impact on the stability and power output of the device.
4. Operational skills: Proficient operational skills are the key to ensuring the efficient operation of second-hand welded pipe machines. Familiar with device characteristics and able to flexibly adjust operating parameters can significantly improve power output efficiency.
5. Power quality: Unstable power supply can cause fluctuations in the power output of second-hand welded pipe machines. The use of high-quality power equipment to ensure stable voltage and current is the foundation for ensuring the normal operation of the equipment.
6. Maintenance: Regular maintenance can effectively extend the service life of second-hand welded pipe machines and help stabilize power output. During maintenance, key parts such as welding joints, cooling systems, and electrical components should be carefully inspected.
7. Load adaptability: The power output of a second-hand welded pipe machine is not only affected by the equipment itself, but also by its matching with the load. Appropriate load distribution and reasonable production scheduling can comprehensively improve the operational efficiency of equipment.
In summary, a comprehensive understanding and mastery of the seven key factors mentioned above can significantly improve the effective power output of second-hand high-frequency welded pipe machines, extend equipment life, and lay a solid foundation for enterprises to save costs and improve production efficiency. Mastering these key points will undoubtedly result in twice the result with half the effort when choosing and using a second-hand welded pipe machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
High frequency welded pipe machine is widely used in modern industry, especially in the pipe manufacturing industry. It is highly favored by users for its high efficiency and precision. In order to better understand and master this technology, this article will use the keyword "second-hand welded pipe machine" and combine it with practical applications to analyze the seven key factors of its effective power output.
Firstly, we need to clarify the definition of 'second-hand welded pipe machine'. Second hand welded pipe machine refers to equipment that has been used but has been repaired and debugged before being put back into use. Due to its newer production technology and lower purchasing costs, it has become an ideal choice for many small and medium-sized enterprises. However, understanding the influencing factors of power output issues that arise during use, especially in high-frequency and high-intensity operating environments, is crucial.
1. The aging degree of the equipment itself: The components of the second-hand welding pipe machine will wear and age to varying degrees over time, which directly affects the stability of its power output. The maintenance and regular inspection of equipment can reduce this impact.
2. Operating environment: Factors such as humidity, temperature, and electromagnetic interference also have a significant impact on the operation of second-hand welded pipe machines. Maintaining a good working environment is crucial for the effective power output of equipment.
3. Debugging and Calibration: Before the second-hand welded pipe machine is put back into use, it needs to undergo strict debugging and calibration to ensure that all parameters reach their optimal state. This has a significant impact on the stability and power output of the device.
4. Operational skills: Proficient operational skills are the key to ensuring the efficient operation of second-hand welded pipe machines. Familiar with device characteristics and able to flexibly adjust operating parameters can significantly improve power output efficiency.
5. Power quality: Unstable power supply can cause fluctuations in the power output of second-hand welded pipe machines. The use of high-quality power equipment to ensure stable voltage and current is the foundation for ensuring the normal operation of the equipment.
6. Maintenance: Regular maintenance can effectively extend the service life of second-hand welded pipe machines and help stabilize power output. During maintenance, key parts such as welding joints, cooling systems, and electrical components should be carefully inspected.
7. Load adaptability: The power output of a second-hand welded pipe machine is not only affected by the equipment itself, but also by its matching with the load. Appropriate load distribution and reasonable production scheduling can comprehensively improve the operational efficiency of equipment.
In summary, a comprehensive understanding and mastery of the seven key factors mentioned above can significantly improve the effective power output of second-hand high-frequency welded pipe machines, extend equipment life, and lay a solid foundation for enterprises to save costs and improve production efficiency. Mastering these key points will undoubtedly result in twice the result with half the effort when choosing and using a second-hand welded pipe machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Analysis of the problem of non squareness in the adjustment of square and rectangular tubes and the method of correcting vertical rollers
Time of issue : 2024-08-24
Product feature introduction
Economical and cost-effective
Firstly, the price of second-hand welded pipe machines is relatively low, which is their most intuitive advantage. For small and medium-sized enterprises, purchasing second-hand equipment can effectively reduce initial investment costs while ensuring the basic functions and production efficiency of the equipment. This makes second-hand square tube machines highly competitive and cost-effective in the market.
Multi functional and easy to maintain
Another major selling point of second-hand welded pipe machines is their versatility. After appropriate adjustments and maintenance, these machines can produce steel pipes of different specifications and shapes to meet diverse market demands. In addition, the maintenance cost of second-hand equipment is usually lower because at the time of purchase, suppliers often provide detailed usage records and maintenance guidelines for the equipment, making it easier for users to perform daily maintenance and repair minor faults.
The issue of 'non square' in the adjustment process
In the process of using a second-hand square tube machine to produce square and rectangular tubes, a common problem is the phenomenon of "square and rectangular tubes not being square". Specifically, this means that the produced square or rectangular pipes have uneven edges, angles, or lengths on each side, which can affect the quality and aesthetics of the product. The main reasons for this problem are improper machine tool parameter settings, roller wear, and differences in material quality.
Correction method of vertical roller
In order to solve the problem of "non square", the use of standing rollers is particularly important. Vertical roller is a tool used to adjust the shape of pipes. By setting the pressure and position of the vertical roller reasonably, the formed square tube can be calibrated to meet the standard requirements in terms of appearance. In the specific operation, the staff need to gradually adjust the angle and force of the vertical roller according to the actual deviation of the square tube, until the various dimensions of the square tube meet the standards.
Application scenarios and instance analysis
The second-hand welded pipe machine is not only suitable for standardized production, but also meets personalized customization needs. Taking construction sites and pipeline installation projects as examples, these fields often require steel pipes of different sizes and shapes. By adjusting the vertical rollers, the second-hand welded pipe machine can quickly produce square and rectangular pipes that meet specific requirements, greatly improving production efficiency and product quality.
Overall, second-hand square tube machines have become an ideal choice in the market due to their affordability, versatility, and ease of maintenance. By setting up and using vertical rollers reasonably, it is possible to effectively address the issue of "non square" in production and ensure product quality. These unique selling points not only make second-hand welded pipe machines shine in industrial manufacturing, but also bring significant economic benefits to enterprises.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Product feature introduction
Economical and cost-effective
Firstly, the price of second-hand welded pipe machines is relatively low, which is their most intuitive advantage. For small and medium-sized enterprises, purchasing second-hand equipment can effectively reduce initial investment costs while ensuring the basic functions and production efficiency of the equipment. This makes second-hand square tube machines highly competitive and cost-effective in the market.
Multi functional and easy to maintain
Another major selling point of second-hand welded pipe machines is their versatility. After appropriate adjustments and maintenance, these machines can produce steel pipes of different specifications and shapes to meet diverse market demands. In addition, the maintenance cost of second-hand equipment is usually lower because at the time of purchase, suppliers often provide detailed usage records and maintenance guidelines for the equipment, making it easier for users to perform daily maintenance and repair minor faults.
The issue of 'non square' in the adjustment process
In the process of using a second-hand square tube machine to produce square and rectangular tubes, a common problem is the phenomenon of "square and rectangular tubes not being square". Specifically, this means that the produced square or rectangular pipes have uneven edges, angles, or lengths on each side, which can affect the quality and aesthetics of the product. The main reasons for this problem are improper machine tool parameter settings, roller wear, and differences in material quality.
Correction method of vertical roller
In order to solve the problem of "non square", the use of standing rollers is particularly important. Vertical roller is a tool used to adjust the shape of pipes. By setting the pressure and position of the vertical roller reasonably, the formed square tube can be calibrated to meet the standard requirements in terms of appearance. In the specific operation, the staff need to gradually adjust the angle and force of the vertical roller according to the actual deviation of the square tube, until the various dimensions of the square tube meet the standards.
Application scenarios and instance analysis
The second-hand welded pipe machine is not only suitable for standardized production, but also meets personalized customization needs. Taking construction sites and pipeline installation projects as examples, these fields often require steel pipes of different sizes and shapes. By adjusting the vertical rollers, the second-hand welded pipe machine can quickly produce square and rectangular pipes that meet specific requirements, greatly improving production efficiency and product quality.
Overall, second-hand square tube machines have become an ideal choice in the market due to their affordability, versatility, and ease of maintenance. By setting up and using vertical rollers reasonably, it is possible to effectively address the issue of "non square" in production and ensure product quality. These unique selling points not only make second-hand welded pipe machines shine in industrial manufacturing, but also bring significant economic benefits to enterprises.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Analysis of the problem of non squareness in the adjustment of square and rectangular tubes by second-hand square tube machines and the method of correcting vertical rollers
Innovation of intelligent heat treatment for welds: detailed explanation of online quenching+tempering (Q+T) technology
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
