Used Pipe Mill Supplier
Roll forming machine is an important manufacturing equipment
- Sort：Information
- Auth:
- Source:
- Release time：2024-11-29 08:38
- Pvs：
【概要描述】Roll forming machine is an important manufacturing equipment, widely used in metal processing industry. The following is the main development process and key technical progress of roll forming machine technology: 1.Initial development stage In the early stages of roll forming technology, machining mainly relies on manual operation and simple mechanical devices. This kind of equipment has simple structure and is difficult to meet the production needs of complex profiles. 2.Mechanization improvement With the advance of the Industrial Revolution, the degree of mechanization has gradually increased. Roller forming machines began to be equipped with electric motors and mechanical transmission systems, which increased production efficiency and output. 3.Automation and CNC technology In the late 20th century, the development of computer technology led to the introduction of automation and numerical control technology (CNC). CNC roller forming machine can realize high-precision and high-efficiency automatic processing through programming, reducing labor costs and improving product quality. 4.Advanced control system The new generation of roll forming machines introduces advanced control systems, including PLC (Programmable logic controller) and HMI (human machine interface), making operation easier and more intelligent. At the same time, the development of sensor technology also provides support for real-time monitoring and precise control. 5.High strength materials and new coatings Modern roller forming machines use high-strength materials and advanced coating technology on roller wheels and other key components, which not only improves the durability and service life of the equipment, but also better ADAPTS to the processing needs of high-strength and high-hardness materials. 6.Modularity and flexibility In recent years, modular design has become a significant trend in roll forming machines. This design allows the equipment to have greater flexibility, can quickly adjust and replace different modules according to production needs, to adapt to diverse, customized production requirements. 7.Intelligent manufacturing and Industrial Internet With the advancement of Industry 4.0, intelligent manufacturing and industrial Internet technologies are gradually applied to roll forming machines. Through data acquisition, analysis and remote monitoring, intelligent equipment operation and production management are realized, improving the efficiency and reliability of the entire manufacturing process. 8.Environmental protection and energy saving technology Environmental protection and energy saving technologies also play an important role in modern roll forming machines. Reduce energy consumption and environmental pollution through optimized design, use of energy-efficient motors and energy recovery devices, and achieve sustainable development. In short, roll forming machine technology in the continuous innovation and development, through the use of new materials, new processes and intelligent technology, greatly improve the production capacity and product quality, to meet the manufacturing needs of different industries. For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Roll forming machine is an important manufacturing equipment
【概要描述】Roll forming machine is an important manufacturing equipment, widely used in metal processing industry. The following is the main development process and key technical progress of roll forming machine technology:
1.Initial development stage
In the early stages of roll forming technology, machining mainly relies on manual operation and simple mechanical devices. This kind of equipment has simple structure and is difficult to meet the production needs of complex profiles.
2.Mechanization improvement
With the advance of the Industrial Revolution, the degree of mechanization has gradually increased. Roller forming machines began to be equipped with electric motors and mechanical transmission systems, which increased production efficiency and output.
3.Automation and CNC technology
In the late 20th century, the development of computer technology led to the introduction of automation and numerical control technology (CNC). CNC roller forming machine can realize high-precision and high-efficiency automatic processing through programming, reducing labor costs and improving product quality.
4.Advanced control system
The new generation of roll forming machines introduces advanced control systems, including PLC (Programmable logic controller) and HMI (human machine interface), making operation easier and more intelligent. At the same time, the development of sensor technology also provides support for real-time monitoring and precise control.
5.High strength materials and new coatings
Modern roller forming machines use high-strength materials and advanced coating technology on roller wheels and other key components, which not only improves the durability and service life of the equipment, but also better ADAPTS to the processing needs of high-strength and high-hardness materials.
6.Modularity and flexibility
In recent years, modular design has become a significant trend in roll forming machines. This design allows the equipment to have greater flexibility, can quickly adjust and replace different modules according to production needs, to adapt to diverse, customized production requirements.
7.Intelligent manufacturing and Industrial Internet
With the advancement of Industry 4.0, intelligent manufacturing and industrial Internet technologies are gradually applied to roll forming machines. Through data acquisition, analysis and remote monitoring, intelligent equipment operation and production management are realized, improving the efficiency and reliability of the entire manufacturing process.
8.Environmental protection and energy saving technology
Environmental protection and energy saving technologies also play an important role in modern roll forming machines. Reduce energy consumption and environmental pollution through optimized design, use of energy-efficient motors and energy recovery devices, and achieve sustainable development.
In short, roll forming machine technology in the continuous innovation and development, through the use of new materials, new processes and intelligent technology, greatly improve the production capacity and product quality, to meet the manufacturing needs of different industries.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
- Sort：Information
- Auth:
- Source:
- Release time：2024-11-29 08:38
- Pvs：
Detail
Roll forming machine is an important manufacturing equipment, widely used in metal processing industry. The following is the main development process and key technical progress of roll forming machine technology:
1.Initial development stage
In the early stages of roll forming technology, machining mainly relies on manual operation and simple mechanical devices. This kind of equipment has simple structure and is difficult to meet the production needs of complex profiles.
2.Mechanization improvement
With the advance of the Industrial Revolution, the degree of mechanization has gradually increased. Roller forming machines began to be equipped with electric motors and mechanical transmission systems, which increased production efficiency and output.
3.Automation and CNC technology
In the late 20th century, the development of computer technology led to the introduction of automation and numerical control technology (CNC). CNC roller forming machine can realize high-precision and high-efficiency automatic processing through programming, reducing labor costs and improving product quality.
4.Advanced control system
The new generation of roll forming machines introduces advanced control systems, including PLC (Programmable logic controller) and HMI (human machine interface), making operation easier and more intelligent. At the same time, the development of sensor technology also provides support for real-time monitoring and precise control.
5.High strength materials and new coatings
Modern roller forming machines use high-strength materials and advanced coating technology on roller wheels and other key components, which not only improves the durability and service life of the equipment, but also better ADAPTS to the processing needs of high-strength and high-hardness materials.
6.Modularity and flexibility
In recent years, modular design has become a significant trend in roll forming machines. This design allows the equipment to have greater flexibility, can quickly adjust and replace different modules according to production needs, to adapt to diverse, customized production requirements.
7.Intelligent manufacturing and Industrial Internet
With the advancement of Industry 4.0, intelligent manufacturing and industrial Internet technologies are gradually applied to roll forming machines. Through data acquisition, analysis and remote monitoring, intelligent equipment operation and production management are realized, improving the efficiency and reliability of the entire manufacturing process.
8.Environmental protection and energy saving technology
Environmental protection and energy saving technologies also play an important role in modern roll forming machines. Reduce energy consumption and environmental pollution through optimized design, use of energy-efficient motors and energy recovery devices, and achieve sustainable development.
In short, roll forming machine technology in the continuous innovation and development, through the use of new materials, new processes and intelligent technology, greatly improve the production capacity and product quality, to meet the manufacturing needs of different industries.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
关键词：
More News
The parameters of the used direct square roll vary depending on the brand, model and usage.
Time of issue : 2025-01-14
1.Roll diameter: The diameter of the roll, usually expressed in millimeters (mm).
2.Roll length: The length of the roll, also expressed in millimeters (mm).
3.Material: roller material, such as high carbon steel, tungsten carbide, etc.
4.Hardness: The hardness of the roll surface, usually expressed by Brinell hardness (HB) or Rockwell hardness (HRC).
5.Rolling force: rolling force per unit area, usually expressed in Newton (N).
6.Speed: The maximum speed of the roll, usually expressed in revolutions per minute (RPM).
7.Bearing capacity: The maximum load that the roll can bear.
8.Service life: the operating life of the roll under standard working conditions.
When buying a used roll, it is recommended to carefully check the quality and wear of the roll and ask about the historical repair and maintenance of the machine to ensure a well-functioning set of equipment. If possible, try to obtain a complete technical data sheet and maintenance records to help you make informed decisions.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Roll diameter: The diameter of the roll, usually expressed in millimeters (mm).
2.Roll length: The length of the roll, also expressed in millimeters (mm).
3.Material: roller material, such as high carbon steel, tungsten carbide, etc.
4.Hardness: The hardness of the roll surface, usually expressed by Brinell hardness (HB) or Rockwell hardness (HRC).
5.Rolling force: rolling force per unit area, usually expressed in Newton (N).
6.Speed: The maximum speed of the roll, usually expressed in revolutions per minute (RPM).
7.Bearing capacity: The maximum load that the roll can bear.
8.Service life: the operating life of the roll under standard working conditions.
When buying a used roll, it is recommended to carefully check the quality and wear of the roll and ask about the historical repair and maintenance of the machine to ensure a well-functioning set of equipment. If possible, try to obtain a complete technical data sheet and maintenance records to help you make informed decisions.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Parameters of second-hand hydraulic cold drawing machine
Time of issue : 2025-01-13
1.Model: This is the specific model name or number of the device.
2.Maximum drawing force: The maximum drawing capacity of the hydraulic cold drawing machine, usually expressed in tons (T).
3.Table size: The length and width of the table, usually expressed in millimeters (mm) or inches (in).
4.Drawing speed: The working speed of the hydraulic cylinder in the drawing process, usually expressed in millimeters/second (mm/s) or meters/minutes (m/min).
5.Cylinder stroke: The maximum stroke length of the hydraulic cylinder, usually expressed in millimeters (mm).
6.Hydraulic system pressure: The highest working pressure of the hydraulic system, usually expressed in MPa or Bar.
7.Power: The motor power that drives the hydraulic pump, usually expressed in kilowatts (kW).
8.Weight of the whole machine: the total weight of the hydraulic cold drawing machine, usually expressed in tons (T) or kilograms (kg).
9.Overall size: The total overall size of the hydraulic cold drawing machine (length × width × height), usually expressed in millimeters (mm).
10.Control system: Type and model of numerical control system or manual control system.
11.Year of manufacture: The year of the cold drawing mechanism, which helps to understand the service life and wear degree of the machine.
12.Maintenance records: Maintenance and maintenance records of the equipment, which can reflect the status and reliability of the equipment.
When buying a used hydraulic cold draw machine, it is recommended to carefully check the technical parameters, use status and maintenance records of the equipment to ensure that its performance meets your needs, while also taking into account the wear and tear of the equipment and maintenance history.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Model: This is the specific model name or number of the device.
2.Maximum drawing force: The maximum drawing capacity of the hydraulic cold drawing machine, usually expressed in tons (T).
3.Table size: The length and width of the table, usually expressed in millimeters (mm) or inches (in).
4.Drawing speed: The working speed of the hydraulic cylinder in the drawing process, usually expressed in millimeters/second (mm/s) or meters/minutes (m/min).
5.Cylinder stroke: The maximum stroke length of the hydraulic cylinder, usually expressed in millimeters (mm).
6.Hydraulic system pressure: The highest working pressure of the hydraulic system, usually expressed in MPa or Bar.
7.Power: The motor power that drives the hydraulic pump, usually expressed in kilowatts (kW).
8.Weight of the whole machine: the total weight of the hydraulic cold drawing machine, usually expressed in tons (T) or kilograms (kg).
9.Overall size: The total overall size of the hydraulic cold drawing machine (length × width × height), usually expressed in millimeters (mm).
10.Control system: Type and model of numerical control system or manual control system.
11.Year of manufacture: The year of the cold drawing mechanism, which helps to understand the service life and wear degree of the machine.
12.Maintenance records: Maintenance and maintenance records of the equipment, which can reflect the status and reliability of the equipment.
When buying a used hydraulic cold draw machine, it is recommended to carefully check the technical parameters, use status and maintenance records of the equipment to ensure that its performance meets your needs, while also taking into account the wear and tear of the equipment and maintenance history.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
The parameters of the used scraping and rolling machine
Time of issue : 2025-01-11
1.Model: The specific model will vary depending on the brand.
2.Scraping width: Maximum scraping width, usually between 600-3000mm.
3.Scraping length: Maximum scraping length, usually between 2000-8000mm.
4.Table size: according to the specifications of the machine.
5.Spindle speed: usually between hundreds to thousands of RPM, the specific value depends on the machine tool model.
6.Motor power: usually ranging from a few kilowatts to tens of kilowatts.
7.Number of tool holders: The number of tool holders of different models may be different.
8.Control system: Old machine tools may be equipped with traditional manual control systems, and may also be upgraded to numerical control systems.
9.Machine weight: several tons to dozens of tons.
10.Accuracy: Most scraping and rolling machine tools have high processing accuracy.
When buying used equipment, it is very important to understand the parameters of the specific model and the use of the equipment in detail. It is best to contact the seller, ask for detailed technical specifications and use records of the equipment, and carry out on-site inspection and testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Model: The specific model will vary depending on the brand.
2.Scraping width: Maximum scraping width, usually between 600-3000mm.
3.Scraping length: Maximum scraping length, usually between 2000-8000mm.
4.Table size: according to the specifications of the machine.
5.Spindle speed: usually between hundreds to thousands of RPM, the specific value depends on the machine tool model.
6.Motor power: usually ranging from a few kilowatts to tens of kilowatts.
7.Number of tool holders: The number of tool holders of different models may be different.
8.Control system: Old machine tools may be equipped with traditional manual control systems, and may also be upgraded to numerical control systems.
9.Machine weight: several tons to dozens of tons.
10.Accuracy: Most scraping and rolling machine tools have high processing accuracy.
When buying used equipment, it is very important to understand the parameters of the specific model and the use of the equipment in detail. It is best to contact the seller, ask for detailed technical specifications and use records of the equipment, and carry out on-site inspection and testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Parameters of used stainless steel pipe on-line bright annealing furnace
Time of issue : 2025-01-10
1.Specifications:
Pipe diameter range: Pipe diameter suitable for processing.
Wall thickness range: Wall thickness range of the pipe.
Processing speed: annealing furnace processing speed of stainless steel pipe.
2.Temperature control:
Maximum temperature: The maximum operating temperature is usually 1000°C to 1200°C.
Heating method: electric heating, gas heating or other heating method.
Temperature uniformity: Ensure uniform temperature distribution in all areas of the furnace.
3.Cooling method:
Air cooling: Use air for rapid cooling.
Water cooling: Use water to improve cooling efficiency.
4.Atmosphere control:
Type of protective gas: Commonly used hydrogen, nitrogen or ammonia decomposition gas.
Gas flow and pressure: Protect gas flow and pressure control.
5.Electrical parameters:
Voltage: Voltage range required for operation.
Power: Total power of the device.
6.Other parameters:
Furnace size: The specific size of the furnace determines the length and diameter of the pipe that can be processed.
Transportation mode: The transmission mode of the pipe in the furnace, such as chain transmission, roller table transmission, etc.
Control mode: manual control, CNC or PLC control system.
In order to ensure that the right used equipment is selected, it is recommended to actually look at the condition of the equipment, understand the age of the equipment and maintenance records, and it is best to consult a professional evaluation.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Specifications:
Pipe diameter range: Pipe diameter suitable for processing.
Wall thickness range: Wall thickness range of the pipe.
Processing speed: annealing furnace processing speed of stainless steel pipe.
2.Temperature control:
Maximum temperature: The maximum operating temperature is usually 1000°C to 1200°C.
Heating method: electric heating, gas heating or other heating method.
Temperature uniformity: Ensure uniform temperature distribution in all areas of the furnace.
3.Cooling method:
Air cooling: Use air for rapid cooling.
Water cooling: Use water to improve cooling efficiency.
4.Atmosphere control:
Type of protective gas: Commonly used hydrogen, nitrogen or ammonia decomposition gas.
Gas flow and pressure: Protect gas flow and pressure control.
5.Electrical parameters:
Voltage: Voltage range required for operation.
Power: Total power of the device.
6.Other parameters:
Furnace size: The specific size of the furnace determines the length and diameter of the pipe that can be processed.
Transportation mode: The transmission mode of the pipe in the furnace, such as chain transmission, roller table transmission, etc.
Control mode: manual control, CNC or PLC control system.
In order to ensure that the right used equipment is selected, it is recommended to actually look at the condition of the equipment, understand the age of the equipment and maintenance records, and it is best to consult a professional evaluation.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
