• Sort：Information
• Auth:
• Source:
• Release time：2024-12-28 09:44
• Pvs：

【概要描述】When operating used cantilever type steel straightener, the following are some basic operating specifications to ensure the safe operation of the equipment and the safety of the operator: 1.Personnel requirements: The operator shall be trained and familiar with the operating procedures and safety requirements of the equipment.used Operators should wear appropriate personal protective equipment (such as protective gloves, safety glasses, safety shoes, etc.). 2.Equipment check: The equipment shall be thoroughly inspected before operation to ensure that the components are not damaged or worn and that the lubrication meets the requirements. Check whether the electrical system is normal, ensure that the circuit is not short circuit, no leakage phenomenon. 3.Boot preparation: Clean the work area to ensure that there is no debris around so as not to affect the operation. Make sure that the emergency stop button of the device is in the normal state, so that the power can be cut off in an emergency. 4.Straightening operation: Place the section steel to be straightened into the feed port of the straightener in order to ensure that it is placed in the correct position to avoid material deviation. Start the device and follow the operation instructions on the operation panel. Adjust the pressure and position of the straightening roller, and make appropriate adjustments according to the specific situation of the section steel to achieve the best straightening effect. During the straightening process, pay attention to the operating status of the equipment and the straightening of the section steel, and adjust it in time. 5.During operation: Keep the attention, observe the state of the equipment and the straightening steel, if any abnormality is found, the equipment should be stopped immediately and repaired. Pay attention to the safe distance between the hands and feet and the equipment to prevent splashes or other accidental injuries. 6.Shutdown and maintenance: When stopping, first cut off the power supply, wait for the equipment to stop running completely before taking out the section steel and checking. After each operation, clean and maintain the equipment, check the lubrication of the equipment, and ensure that the equipment is in good working condition. Regular detailed inspection and maintenance to ensure long-term safe and stable operation of the equipment. 7.Records Management: Record key data and equipment status of each operation, and make records of equipment use and maintenance for easy management and regular inspection. The above code of practice is designed to ensure the safe operation and efficient production of used cantilever type steel straighteners. Any operation and maintenance should be based on the specific equipment manual and related technical requirements. For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill