Used Pipe Mill Supplier
How to prevent common defects in high frequency welded pipe machine
- Sort：Information
- Auth:
- Source:
- Release time：2023-05-09 11:30
- Pvs：
【概要描述】Defects in the actual production of high-frequency welded pipes by high frequency welded pipe machine are sometimes not caused by one reason, but are usually caused by a combination of factors. Welding defects can also be caused by other reasons outside the welding area. Therefore, various factors should be comprehensively considered for defects, and the causes should be carefully analyzed to solve the problem.
How to prevent common defects in high frequency welded pipe machine
【概要描述】Defects in the actual production of high-frequency welded pipes by high frequency welded pipe machine are sometimes not caused by one reason, but are usually caused by a combination of factors. Welding defects can also be caused by other reasons outside the welding area. Therefore, various factors should be comprehensively considered for defects, and the causes should be carefully analyzed to solve the problem.
- Sort：Information
- Auth:
- Source:
- Release time：2023-05-09 11:30
- Pvs：
Detail
Defects in the actual production of high-frequency welded pipes by high frequency welded pipe machine are sometimes not caused by one reason, but are usually caused by a combination of factors. Welding defects can also be caused by other reasons outside the welding area. Therefore, various factors should be comprehensively considered for defects, and the causes should be carefully analyzed to solve the problem.
Inclusions
The formation mechanism of the inclusion defect is a defect formed by the metal oxide not being clamped on the welding fusion surface with the extrusion of the molten metal.
These metal oxides are usually formed on the molten metal surface of the V-angle. When the approach speed of the strip edge is lower than the melting speed, and the melting speed is higher than the discharge speed of the molten metal, it will form a V-shaped apex containing molten metal and The inclusions of metal oxides, the metal oxides cannot be completely discharged by normal extrusion, and the clean metal solution surface is doped with these metal oxides during the forging and welding process to form defects.
Such defects will lead to cracks after flattening of the weld, and inclusions will be seen at the fracture of the weld. Such defects appear in different forms, sometimes appearing singly, and sometimes appearing in chains.
Inclusion Defect Prevention Measures:
(1) The V-shaped angle is strictly controlled at 4~6
(2) The unit is adjusted to ensure a stable opening angle length
(3) The Mn/Si ratio in the chemical composition of the strip is greater than 8:1
(4) Reduce the oxidation of the welding area (a variety of measures, not going into details)
Pre-arc
This kind of defect is actually caused by insufficient fusion caused by the pre-arc. When the high frequency welded pipe machine is used to make pipes, it usually occurs on the edge of the strip steel, or the oxide scale and rust fall before the apex of the V angle to form a bridge, causing a short circuit. The current jump produces a pre-arc phenomenon, and the short-circuit current changes the current direction and reduces the heat at the V corner.
For defects caused by instantaneous shunt, a bright, flat plane fracture can be seen from the weld fracture.
Sometimes there is no burr on the edge of the strip, or oxide skin, rust, etc., but the V angle is too small or the voltage is too high.
caused by discharge.
Pre-arc defect prevention measures:
(1) The V-shaped angle is strictly controlled at 4~6
(2) The edge of the strip is clean and smooth without burrs
(3) Keep the cooling water clean, control the flow direction of the cooling water, and try to avoid the flow to the V angle
Insufficient fusion
This type of defect is due to the fact that the edges of the two strips are heated but not fully fused, and a good weld is not formed.
The most direct cause of insufficient fusion is insufficient heating during welding. There are many related factors that cause insufficient welding heat, such as the output of high frequency power, V angle and heating length, the position of the magnet bar, the working condition and cooling of the magnet bar, the size of the induction coil, the welding speed and so on. These factors interact with each other, and the combined effect leads to such defects.
Insufficient fusion defect prevention measures:
(1) The matching of welding input heat and welding speed, and the characteristics of the raw material of the tube blank
(2) Working condition of magnetic rod
(3) V angle and heating length
(4) Induction coil specifications
The stability and good state of high frequency welded pipe machine are the basic conditions for no defects. Improving the recording and analysis of process parameters can improve the quality of the pipe more comprehensively.
关键词：
More News
Analysis of seven key factors affecting the effective power output of second-hand high-frequency welded pipe machines
Time of issue : 2024-08-25
High frequency welded pipe machine is widely used in modern industry, especially in the pipe manufacturing industry. It is highly favored by users for its high efficiency and precision. In order to better understand and master this technology, this article will use the keyword "second-hand welded pipe machine" and combine it with practical applications to analyze the seven key factors of its effective power output.
Firstly, we need to clarify the definition of 'second-hand welded pipe machine'. Second hand welded pipe machine refers to equipment that has been used but has been repaired and debugged before being put back into use. Due to its newer production technology and lower purchasing costs, it has become an ideal choice for many small and medium-sized enterprises. However, understanding the influencing factors of power output issues that arise during use, especially in high-frequency and high-intensity operating environments, is crucial.
1. The aging degree of the equipment itself: The components of the second-hand welding pipe machine will wear and age to varying degrees over time, which directly affects the stability of its power output. The maintenance and regular inspection of equipment can reduce this impact.
2. Operating environment: Factors such as humidity, temperature, and electromagnetic interference also have a significant impact on the operation of second-hand welded pipe machines. Maintaining a good working environment is crucial for the effective power output of equipment.
3. Debugging and Calibration: Before the second-hand welded pipe machine is put back into use, it needs to undergo strict debugging and calibration to ensure that all parameters reach their optimal state. This has a significant impact on the stability and power output of the device.
4. Operational skills: Proficient operational skills are the key to ensuring the efficient operation of second-hand welded pipe machines. Familiar with device characteristics and able to flexibly adjust operating parameters can significantly improve power output efficiency.
5. Power quality: Unstable power supply can cause fluctuations in the power output of second-hand welded pipe machines. The use of high-quality power equipment to ensure stable voltage and current is the foundation for ensuring the normal operation of the equipment.
6. Maintenance: Regular maintenance can effectively extend the service life of second-hand welded pipe machines and help stabilize power output. During maintenance, key parts such as welding joints, cooling systems, and electrical components should be carefully inspected.
7. Load adaptability: The power output of a second-hand welded pipe machine is not only affected by the equipment itself, but also by its matching with the load. Appropriate load distribution and reasonable production scheduling can comprehensively improve the operational efficiency of equipment.
In summary, a comprehensive understanding and mastery of the seven key factors mentioned above can significantly improve the effective power output of second-hand high-frequency welded pipe machines, extend equipment life, and lay a solid foundation for enterprises to save costs and improve production efficiency. Mastering these key points will undoubtedly result in twice the result with half the effort when choosing and using a second-hand welded pipe machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
High frequency welded pipe machine is widely used in modern industry, especially in the pipe manufacturing industry. It is highly favored by users for its high efficiency and precision. In order to better understand and master this technology, this article will use the keyword "second-hand welded pipe machine" and combine it with practical applications to analyze the seven key factors of its effective power output.
Firstly, we need to clarify the definition of 'second-hand welded pipe machine'. Second hand welded pipe machine refers to equipment that has been used but has been repaired and debugged before being put back into use. Due to its newer production technology and lower purchasing costs, it has become an ideal choice for many small and medium-sized enterprises. However, understanding the influencing factors of power output issues that arise during use, especially in high-frequency and high-intensity operating environments, is crucial.
1. The aging degree of the equipment itself: The components of the second-hand welding pipe machine will wear and age to varying degrees over time, which directly affects the stability of its power output. The maintenance and regular inspection of equipment can reduce this impact.
2. Operating environment: Factors such as humidity, temperature, and electromagnetic interference also have a significant impact on the operation of second-hand welded pipe machines. Maintaining a good working environment is crucial for the effective power output of equipment.
3. Debugging and Calibration: Before the second-hand welded pipe machine is put back into use, it needs to undergo strict debugging and calibration to ensure that all parameters reach their optimal state. This has a significant impact on the stability and power output of the device.
4. Operational skills: Proficient operational skills are the key to ensuring the efficient operation of second-hand welded pipe machines. Familiar with device characteristics and able to flexibly adjust operating parameters can significantly improve power output efficiency.
5. Power quality: Unstable power supply can cause fluctuations in the power output of second-hand welded pipe machines. The use of high-quality power equipment to ensure stable voltage and current is the foundation for ensuring the normal operation of the equipment.
6. Maintenance: Regular maintenance can effectively extend the service life of second-hand welded pipe machines and help stabilize power output. During maintenance, key parts such as welding joints, cooling systems, and electrical components should be carefully inspected.
7. Load adaptability: The power output of a second-hand welded pipe machine is not only affected by the equipment itself, but also by its matching with the load. Appropriate load distribution and reasonable production scheduling can comprehensively improve the operational efficiency of equipment.
In summary, a comprehensive understanding and mastery of the seven key factors mentioned above can significantly improve the effective power output of second-hand high-frequency welded pipe machines, extend equipment life, and lay a solid foundation for enterprises to save costs and improve production efficiency. Mastering these key points will undoubtedly result in twice the result with half the effort when choosing and using a second-hand welded pipe machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Analysis of the problem of non squareness in the adjustment of square and rectangular tubes and the method of correcting vertical rollers
Time of issue : 2024-08-24
Product feature introduction
Economical and cost-effective
Firstly, the price of second-hand welded pipe machines is relatively low, which is their most intuitive advantage. For small and medium-sized enterprises, purchasing second-hand equipment can effectively reduce initial investment costs while ensuring the basic functions and production efficiency of the equipment. This makes second-hand square tube machines highly competitive and cost-effective in the market.
Multi functional and easy to maintain
Another major selling point of second-hand welded pipe machines is their versatility. After appropriate adjustments and maintenance, these machines can produce steel pipes of different specifications and shapes to meet diverse market demands. In addition, the maintenance cost of second-hand equipment is usually lower because at the time of purchase, suppliers often provide detailed usage records and maintenance guidelines for the equipment, making it easier for users to perform daily maintenance and repair minor faults.
The issue of 'non square' in the adjustment process
In the process of using a second-hand square tube machine to produce square and rectangular tubes, a common problem is the phenomenon of "square and rectangular tubes not being square". Specifically, this means that the produced square or rectangular pipes have uneven edges, angles, or lengths on each side, which can affect the quality and aesthetics of the product. The main reasons for this problem are improper machine tool parameter settings, roller wear, and differences in material quality.
Correction method of vertical roller
In order to solve the problem of "non square", the use of standing rollers is particularly important. Vertical roller is a tool used to adjust the shape of pipes. By setting the pressure and position of the vertical roller reasonably, the formed square tube can be calibrated to meet the standard requirements in terms of appearance. In the specific operation, the staff need to gradually adjust the angle and force of the vertical roller according to the actual deviation of the square tube, until the various dimensions of the square tube meet the standards.
Application scenarios and instance analysis
The second-hand welded pipe machine is not only suitable for standardized production, but also meets personalized customization needs. Taking construction sites and pipeline installation projects as examples, these fields often require steel pipes of different sizes and shapes. By adjusting the vertical rollers, the second-hand welded pipe machine can quickly produce square and rectangular pipes that meet specific requirements, greatly improving production efficiency and product quality.
Overall, second-hand square tube machines have become an ideal choice in the market due to their affordability, versatility, and ease of maintenance. By setting up and using vertical rollers reasonably, it is possible to effectively address the issue of "non square" in production and ensure product quality. These unique selling points not only make second-hand welded pipe machines shine in industrial manufacturing, but also bring significant economic benefits to enterprises.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Product feature introduction
Economical and cost-effective
Firstly, the price of second-hand welded pipe machines is relatively low, which is their most intuitive advantage. For small and medium-sized enterprises, purchasing second-hand equipment can effectively reduce initial investment costs while ensuring the basic functions and production efficiency of the equipment. This makes second-hand square tube machines highly competitive and cost-effective in the market.
Multi functional and easy to maintain
Another major selling point of second-hand welded pipe machines is their versatility. After appropriate adjustments and maintenance, these machines can produce steel pipes of different specifications and shapes to meet diverse market demands. In addition, the maintenance cost of second-hand equipment is usually lower because at the time of purchase, suppliers often provide detailed usage records and maintenance guidelines for the equipment, making it easier for users to perform daily maintenance and repair minor faults.
The issue of 'non square' in the adjustment process
In the process of using a second-hand square tube machine to produce square and rectangular tubes, a common problem is the phenomenon of "square and rectangular tubes not being square". Specifically, this means that the produced square or rectangular pipes have uneven edges, angles, or lengths on each side, which can affect the quality and aesthetics of the product. The main reasons for this problem are improper machine tool parameter settings, roller wear, and differences in material quality.
Correction method of vertical roller
In order to solve the problem of "non square", the use of standing rollers is particularly important. Vertical roller is a tool used to adjust the shape of pipes. By setting the pressure and position of the vertical roller reasonably, the formed square tube can be calibrated to meet the standard requirements in terms of appearance. In the specific operation, the staff need to gradually adjust the angle and force of the vertical roller according to the actual deviation of the square tube, until the various dimensions of the square tube meet the standards.
Application scenarios and instance analysis
The second-hand welded pipe machine is not only suitable for standardized production, but also meets personalized customization needs. Taking construction sites and pipeline installation projects as examples, these fields often require steel pipes of different sizes and shapes. By adjusting the vertical rollers, the second-hand welded pipe machine can quickly produce square and rectangular pipes that meet specific requirements, greatly improving production efficiency and product quality.
Overall, second-hand square tube machines have become an ideal choice in the market due to their affordability, versatility, and ease of maintenance. By setting up and using vertical rollers reasonably, it is possible to effectively address the issue of "non square" in production and ensure product quality. These unique selling points not only make second-hand welded pipe machines shine in industrial manufacturing, but also bring significant economic benefits to enterprises.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Analysis of the problem of non squareness in the adjustment of square and rectangular tubes by second-hand square tube machines and the method of correcting vertical rollers
Innovation of intelligent heat treatment for welds: detailed explanation of online quenching+tempering (Q+T) technology
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
