• Sort：Information
• Auth:
• Source:
• Release time：2024-12-11 09:22
• Pvs：

【概要描述】High frequency welding stainless steel welded pipe production line is a special equipment and process for stainless steel pipe production, suitable for various specifications and different uses of stainless steel welded pipe production. The following is an overview of some of the main components and process flow of high-frequency stainless steel welded pipe production line: Main components: 1.Uncoiling machine: Unroll the stainless steel tape and send it to the production line. 2.Looping device: used to store and adjust the tension of the strip to ensure continuous production. 3.Leveler: The strip steel after expansion is corrected to ensure its flatness. 4.Molding unit: The strip steel is gradually rolled into the shape of the tube blank. 5.High frequency welding machine: The use of high frequency current through contact or induction mode to heat and weld the tube blank, so that it becomes a welded steel pipe. 6.Deburring device: cut the internal and external burrs of the weld to ensure that the internal and external surfaces of the pipe are smooth. 7.Sizing unit: Calibrate the welded steel pipe to ensure the diameter accuracy of the steel pipe. 8.Cooling system: cooling the weld and steel pipe to avoid the impact of high temperature on the performance of the pipe. 9.Flying saw machine: The continuous production of steel pipe according to the set length cutting. 10.Discharge table: Store and transfer finished steel pipes. Process flow: 1.Coil preparation: Smooth the stainless steel strip coil through the uncoil machine. 2.Continuous forming: The flat strip steel is gradually rolled into a tube blank by the forming unit. 3.High frequency welding: Use high frequency welding technology to heat the tube billet, so that its edge is melted and pressed together to form a weld, and complete the welding of the welded pipe. 4.Deburring: Clean the weld joints inside and outside to ensure the surface finish. 5.Sizing and straightening: The precision of the welded pipe is adjusted by the sizing unit to ensure that the pipe diameter and straightness meet the requirements. 6.Cooling: cooling the welded pipe through the cooling system to avoid affecting the performance of the pipe due to high temperature. 7.Cut pipe: Use flying saw machine to cut the welded steel pipe according to the set length. 8.Finished product treatment: The cut steel pipe will be inspected, marked, packaged, etc., ready for storage or transportation. Advantages: High efficiency: High frequency welding speed, suitable for mass production. High quality: beautiful weld forming, good mechanical properties. Diversity: Stainless steel welded pipes of different specifications and applications can be produced. High frequency welding stainless steel welded pipe production line is widely used in petrochemical, building decoration, machinery manufacturing, automotive industry and other fields to meet a variety of industrial and civil needs. For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill