• Sort：Information
• Auth:
• Source:
• Release time：2024-11-21 09:27
• Pvs：

【概要描述】Good maintenance of used cold-formed welded pipe equipment can extend its service life and ensure its stable operation. Here are some suggested maintenance steps: Daily maintenance 1.Equipment cleaning: Keep the equipment clean and avoid dust and impurities. After each use, welding slag, metal chips and other debris should be cleaned. 2.Lubrication Maintenance: Regularly check the lubrication of each lubricating part, and add lubricating oil to each moving part on time to ensure the smooth operation of the equipment. Record the performance of lubrication maintenance and adjust the lubrication frequency. 3.Fastening check: Check the fasteners of the equipment regularly to ensure that they are not loose or falling off. If loose, tighten them in time. Regular maintenance 1.Mechanical part inspection: Check the important parts of the equipment, such as reducer, gear, etc., for wear or abnormal sound. Check the transmission system of the equipment, including belts, chains, gears, etc., to ensure that it is in good condition and does not have problems such as breakage and wear. 2.Electrical system inspection: Check whether the wiring terminals in the electric control system are firm and whether the cables are damaged. Check the working status of each electrical component regularly to ensure the normal operation of the electrical system. 3.Hydraulic system inspection: Check whether the oil level of the hydraulic system is normal, whether the oil is clean, and replace it in time if the oil is deteriorated. Check whether there is leakage in the hydraulic pipes and joints to ensure that the hydraulic system is well sealed. 4.Key parts inspection: Regular inspection and replacement of severely worn parts, such as rollers, molds, etc., to ensure the quality of processing. Test key components and deal with problems in time. Daily operation precautions 1.Correct operation: The operator shall strictly follow the instructions of the equipment to prevent damage to the equipment due to improper operation. Avoid equipment overload and operate according to specified processing parameters. 2.Regular training: Conduct regular training for operators to improve their equipment operation skills and maintenance awareness. 3.Timely minor repairs: When the equipment has a small failure, it is repaired in time to prevent the small problem from developing into a major failure. Records and feedback 1.Maintenance records : Establish equipment maintenance records, and record in detail the contents, time, discovered problems and solutions of each maintenance. 2.Feedback Mechanism: Set up equipment use feedback mechanism to encourage operators to report problems found in the operation of equipment in a timely manner, so as to deal with them in a timely manner. Through the above maintenance measures, the operation stability and service life of second-hand cold-formed welded pipe equipment can be greatly improved to ensure the smooth progress of production. For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill