Used Pipe Mill Supplier
Control the best efficiency of the operation and welding process of high frequency welded pipe equipment (1)
- Sort：Information
- Auth:
- Source:
- Release time：2022-11-21 11:30
- Pvs：
【概要描述】In the high-frequency welding of high frequency welded pipe equipment, the welding power is generally above 100KW, and 80% of the power is consumed in the heating of the coil, the resistance, and the heating of the pressure roller and the tube blank.
Control the best efficiency of the operation and welding process of high frequency welded pipe equipment (1)
【概要描述】In the high-frequency welding of high frequency welded pipe equipment, the welding power is generally above 100KW, and 80% of the power is consumed in the heating of the coil, the resistance, and the heating of the pressure roller and the tube blank.
- Sort：Information
- Auth:
- Source:
- Release time：2022-11-21 11:30
- Pvs：
Detail
In the high-frequency welding of high frequency welded pipe equipment, the welding power is generally above 100KW, and 80% of the power is consumed in the heating of the coil, the resistance, and the heating of the pressure roller and the tube blank.
Therefore, the key to minimizing power loss is to set up reasonable coils, resistors and reasonable configuration of rolling mills. In most cases, after optimizing the welding process, power loss can be reduced by 50%, and welding quality can be improved, downtime can be reduced, and output can be increased.
How to control the best efficiency of the operating and welding process of high frequency welded pipe equipment can be divided into 8 types, and we will introduce 3 of them below: ①The mechanism of high-frequency welding. ②Why choose high-frequency current. ③Operational efficiency.
①Mechanism of high frequency welding
The mechanism of high-frequency welding is: the voltage passes through the edge of the opening of the tube blank, and the current is induced to reach the confluence point. When current flows through the junction, the metal is rapidly heated. Using the pressure of the squeeze roller, the heated melted part of the metal achieves hot extrusion bonding, and the impurities are also squeezed out from the weld.
②Why choose high frequency current
Technically speaking, impedance is the main consumption when low-frequency current passes through a resistive element. As the frequency increases, the magnetic field increases, and the inductive reactance becomes the main factor in the impedance, and it increases as the frequency increases. In the welding process, the size of the induction coil as the primary winding should be appropriately smaller. The power can be adjusted by electromagnetic coupling, and the magnetic loss caused by high frequency is related to the number of coil turns and current. For example, welding a pipe with a power source with a frequency of 60 Hz requires a coil of hundreds of turns and a current of thousands of amperes; while high-frequency welding usually requires a coil of 1 to 3 turns and a current of hundreds of amperes. In addition, high-frequency welding is also conducive to the occurrence of "skin effect" and "proximity effect".
③Operational efficiency
The reason for the low efficiency of high-frequency welding operation is that the position of the induction coil and the impedance device is not very good. When a voltage is applied to the edge of the tube billet, a part of the current flows along the edge of the strip through the V-shaped area to heat the edge of the strip; the other part of the current flows through the inner ring surface of the open tube body and returns through the outer ring surface, resulting in了 Power loss.
The magnitude of the current flowing through the V-shaped area and the inner ring surface depends on their impedance, as shown in Figure 1. Shortening the length of the V-shaped zone and keeping its distance small can reduce the impedance of the path, and vice versa, increase the impedance and increase the heat loss. The length of the V-shaped zone has a greater influence on the efficiency of the heating zone than the frequency. Both the short working coil and the larger pipe diameter can increase the internal impedance of the pipe. Placing a resistor in the tube (as shown in Figure 1b) will also increase the internal impedance.
The above is to control the best efficiency of the welding process of the high frequency welded pipe equipment. I hope it will be of some help to you. Our company has many brands and resources, and there is always one that suits you. You only need to inform us of your pipe-making needs, and our company will provide you with used welded pipe equipments that really suits your needs. Welcome new and old customers to consult and order.
关键词：
More News
Why did you choose 60 used cold bending machine
Time of issue : 2025-03-11
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Why did you choose this refurbished 140 to 165 second-hand welded pipe equipment?
Time of issue : 2025-03-07
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Answer: Three core advantages:
The processing capacity of this used pipe making machine includes round pipes with diameter of 60-159mm, square and rectangular pipes with diameter of 50 * 50-120 * 120mm, anda wall thickness of 2.0-5.0mm, fully covering the mainstream demand of the welded pipe equipment market.
Refurbishment guarantee for Used ERW tube mill machinery: All mechanical and electrical components undergo professional maintenance/replacement, and the life assessment of key components meets the standards. The renovation and maintenance process for second-hand welded pipe equipment takes at least one month and up to three months.
The cost efficiency of the second-hand high-frequency welded pipe machine is only 45% of that of the new welded pipe machine. The production line of the used welded pipe mills production line sold by our company includes a one-year extended warranty, free training, and lifelong technical support.
Q: After purchasing second-hand welded pipe equipment, how long can it be put into production?
Answer: Jin Yujie Company's second-hand welded pipe equipment is all sourced from first-hand sources, with stock in the warehouse. It takes 7 days to ship and 15 days to complete installation and commissioning. The second-hand welded pipe unit can be purchased and used immediately.
It is recommended to arrange a technical team and decision-makers to conduct on-site inspections of the warehouse as soon as possible, select a second-hand welded pipe unit on site, in order to put it into production as soon as possible, create production capacity for the second-hand welded pipe production line, and achieve profitability.
more datail about this 140 enlarged 165 used tube mill line, please check here:
https://www.usedpipemill.com/product/Forever-Used-High-Frequency-Welding-Pipe-Making-Machie-of-%CE%A6140-Expand-to-%CE%A6165MM-221.html
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
The Role of Roller Conveyor Motors in Used Pipe Welding Machines
Time of issue : 2025-03-05
Used pipe welding machines refer to welding equipment that has been previously used and is resold, typically for producing welded steel pipes. In used pipe welding machines, the roller conveyor motor is a critical component whose role runs through the entire production process, directly affecting the equipment's operational efficiency, processing accuracy, and product quality. Below is an analysis of the main functions and importance of roller conveyor motors in used pipe welding machines.
1. Transporting Pipe Materials
The primary function of the roller conveyor motor is to drive the rollers, transporting pipe materials from one process to the next. During pipe welding production, the pipe material needs to go through multiple stages, including uncoiling, forming, welding, cooling, sizing, and cutting. The roller conveyor motor ensures smooth and continuous movement of the pipe material by controlling the rotation of the rollers, preventing jams or deviations.
2. Ensuring Production Continuity
In used pipe welding machines, the stable operation of the roller conveyor motor is key to ensuring production continuity. If the motor fails, it may cause interruptions in material transportation, affecting the efficiency of the entire production line. Therefore, the reliability and durability of the roller conveyor motor are particularly important, especially in used equipment, where regular maintenance and care are essential.
3. Controlling Pipe Material Speed
The roller conveyor motor controls the speed of the rollers through a speed regulation device, thereby adjusting the transportation speed of the pipe material. During the welding process, the transportation speed of the pipe material must match the welding speed to ensure weld quality. The precise control capability of the roller conveyor motor directly affects welding results and production efficiency.
4. Improving Processing Accuracy
The smooth operation of the roller conveyor motor helps reduce vibrations and deviations during material transportation, thereby improving processing accuracy. In used pipe welding machines, the performance of the roller conveyor motor may decline due to equipment aging, so regular inspection and maintenance are necessary to ensure its operational precision.
5. Adapting to Multiple Specifications
Roller conveyor motors are typically equipped with speed regulation functions, allowing them to adapt to the production of pipes with different specifications. For example, when producing thin-walled and thick-walled pipes, the motor needs to adjust its speed to meet different processing requirements. This flexibility enables used pipe welding machines to fulfill diverse production needs.
6. Energy Saving and Efficiency
Modern roller conveyor motors are often designed for high efficiency and energy savings, reducing energy consumption and improving production efficiency. In used pipe welding machines, if the motor is aging or its performance declines, energy consumption may increase. Therefore, it is recommended to upgrade or replace the motor to enhance the overall energy efficiency of the equipment.
7. Reducing Equipment Wear
The smooth operation of the roller conveyor motor can reduce wear on other components of the equipment. For instance, if the motor operates unstably, it may cause premature wear on rollers, bearings, and other parts, increasing maintenance costs. Thus, in used pipe welding machines, the condition of the roller conveyor motor directly impacts the equipment's service life.
8. Automation Control
In modern pipe welding production lines, roller conveyor motors are often integrated with PLCs (Programmable Logic Controllers) and sensors to achieve automated control. In used pipe welding machines, if the roller conveyor motor supports automation functions, it can significantly improve production efficiency and product quality.
9. Safety
The stable operation of the roller conveyor motor is also closely related to production safety. If the motor fails, it may lead to material pile-ups, equipment jams, or even injuries. Therefore, in used pipe welding machines, the safety of the roller conveyor motor cannot be overlooked.
10. Maintenance and Care
In used pipe welding machines, the maintenance of the roller conveyor motor is particularly important. Since the equipment has been used for a certain period, the motor's performance may have declined. Regularly checking the motor's insulation, lubrication, and operating temperature can extend its service life and ensure stable equipment operation.
Conclusion
The roller conveyor motor plays a vital role in used pipe welding machines, with its functions covering material transportation, speed control, processing accuracy, energy efficiency, and more. For used equipment, the condition of the roller conveyor motor directly affects the overall performance and production efficiency of the equipment. Therefore,
Used pipe welding machines refer to welding equipment that has been previously used and is resold, typically for producing welded steel pipes. In used pipe welding machines, the roller conveyor motor is a critical component whose role runs through the entire production process, directly affecting the equipment's operational efficiency, processing accuracy, and product quality. Below is an analysis of the main functions and importance of roller conveyor motors in used pipe welding machines.
1. Transporting Pipe Materials
The primary function of the roller conveyor motor is to drive the rollers, transporting pipe materials from one process to the next. During pipe welding production, the pipe material needs to go through multiple stages, including uncoiling, forming, welding, cooling, sizing, and cutting. The roller conveyor motor ensures smooth and continuous movement of the pipe material by controlling the rotation of the rollers, preventing jams or deviations.
2. Ensuring Production Continuity
In used pipe welding machines, the stable operation of the roller conveyor motor is key to ensuring production continuity. If the motor fails, it may cause interruptions in material transportation, affecting the efficiency of the entire production line. Therefore, the reliability and durability of the roller conveyor motor are particularly important, especially in used equipment, where regular maintenance and care are essential.
3. Controlling Pipe Material Speed
The roller conveyor motor controls the speed of the rollers through a speed regulation device, thereby adjusting the transportation speed of the pipe material. During the welding process, the transportation speed of the pipe material must match the welding speed to ensure weld quality. The precise control capability of the roller conveyor motor directly affects welding results and production efficiency.
4. Improving Processing Accuracy
The smooth operation of the roller conveyor motor helps reduce vibrations and deviations during material transportation, thereby improving processing accuracy. In used pipe welding machines, the performance of the roller conveyor motor may decline due to equipment aging, so regular inspection and maintenance are necessary to ensure its operational precision.
5. Adapting to Multiple Specifications
Roller conveyor motors are typically equipped with speed regulation functions, allowing them to adapt to the production of pipes with different specifications. For example, when producing thin-walled and thick-walled pipes, the motor needs to adjust its speed to meet different processing requirements. This flexibility enables used pipe welding machines to fulfill diverse production needs.
6. Energy Saving and Efficiency
Modern roller conveyor motors are often designed for high efficiency and energy savings, reducing energy consumption and improving production efficiency. In used pipe welding machines, if the motor is aging or its performance declines, energy consumption may increase. Therefore, it is recommended to upgrade or replace the motor to enhance the overall energy efficiency of the equipment.
7. Reducing Equipment Wear
The smooth operation of the roller conveyor motor can reduce wear on other components of the equipment. For instance, if the motor operates unstably, it may cause premature wear on rollers, bearings, and other parts, increasing maintenance costs. Thus, in used pipe welding machines, the condition of the roller conveyor motor directly impacts the equipment's service life.
8. Automation Control
In modern pipe welding production lines, roller conveyor motors are often integrated with PLCs (Programmable Logic Controllers) and sensors to achieve automated control. In used pipe welding machines, if the roller conveyor motor supports automation functions, it can significantly improve production efficiency and product quality.
9. Safety
The stable operation of the roller conveyor motor is also closely related to production safety. If the motor fails, it may lead to material pile-ups, equipment jams, or even injuries. Therefore, in used pipe welding machines, the safety of the roller conveyor motor cannot be overlooked.
10. Maintenance and Care
In used pipe welding machines, the maintenance of the roller conveyor motor is particularly important. Since the equipment has been used for a certain period, the motor's performance may have declined. Regularly checking the motor's insulation, lubrication, and operating temperature can extend its service life and ensure stable equipment operation.
Conclusion
The roller conveyor motor plays a vital role in used pipe welding machines, with its functions covering material transportation, speed control, processing accuracy, energy efficiency, and more. For used equipment, the condition of the roller conveyor motor directly affects the overall performance and production efficiency of the equipment. Therefore,
In the production process of used welded pipe machines, the expanding machine is a crucial piece of equipment
Time of issue : 2025-03-04
1. Diameter Adjustment
After the welding of steel pipes is completed, due to thermal and mechanical stresses during the welding process, the diameter of the pipes may become uneven or fail to meet standards. The expanding machine adjusts the diameter of the pipes through mechanical or hydraulic means, ensuring it meets design specifications. This process not only improves the dimensional accuracy of the pipes but also ensures their interchangeability and compatibility in use.
2. Shape Correction
During the welding process, steel pipes may develop defects such as ovality, bending, or other shape irregularities. The expanding machine corrects these defects by applying uniform pressure, making the cross-section of the pipes more circular and thereby enhancing their overall quality and appearance.
3. Improvement of Mechanical Properties
During the expanding process, the inner and outer surfaces of the pipes are subjected to uniform stress, which helps eliminate residual stresses generated during welding and improves the mechanical properties of the pipes. For example, expanding can enhance the compressive and bending strength of the pipes, making them more suitable for use in high-stress environments.
4. Surface Quality Enhancement
The expanding machine can also polish the inner and outer surfaces of the pipes to some extent during the expanding process, removing burrs and oxide scales generated during welding. This improves the surface quality of the pipes, which is particularly important for applications requiring high surface quality, such as fluid or gas transportation.
5. Increased Production Efficiency
In the production line of used welded pipe machines, the use of an expanding machine can significantly improve production efficiency. Through automated or semi-automated expanding operations, manual intervention is reduced, production cycles are shortened, and production costs are lowered. Additionally, the high-precision operation of the expanding machine reduces the scrap rate, enhancing the overall efficiency of the production line.
6. Adaptability to Multiple Specifications
Expanding machines typically feature adjustable expanding ranges and pressure settings, allowing them to accommodate the production of pipes with different diameters and wall thicknesses. This flexibility enables used welded pipe machines to produce pipes of various specifications, meeting the diverse needs of customers.
7. Extended Equipment Lifespan
In used welded pipe machines, the use of an expanding machine can also extend the lifespan of other equipment. By correcting the shape and dimensions of the pipes, wear and damage to subsequent processing equipment are reduced, thereby prolonging the lifespan of the entire production line.
8. Environmental Protection and Energy Efficiency
Modern expanding machines often incorporate energy-saving designs and eco-friendly materials, reducing energy consumption and environmental pollution. In the production process of used welded pipe machines, the use of high-efficiency expanding machines not only lowers production costs but also aligns with the environmental requirements of modern industry.
Conclusion
The role of the expanding machine in used welded pipe machines cannot be overlooked. It not only improves the dimensional accuracy and shape quality of steel pipes but also enhances their mechanical properties, improves surface quality, boosts production efficiency, adapts to multiple specifications, extends equipment lifespan, and meets environmental and energy-saving requirements. Therefore, the expanding machine is an indispensable key piece of equipment in the production process of used welded pipe machines.
From the above analysis, it is clear that the expanding machine plays multiple roles and holds significant importance in used welded pipe machines. Whether from the perspective of product quality, production efficiency, or economic benefits, the expanding machine is a critical component.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1. Diameter Adjustment
After the welding of steel pipes is completed, due to thermal and mechanical stresses during the welding process, the diameter of the pipes may become uneven or fail to meet standards. The expanding machine adjusts the diameter of the pipes through mechanical or hydraulic means, ensuring it meets design specifications. This process not only improves the dimensional accuracy of the pipes but also ensures their interchangeability and compatibility in use.
2. Shape Correction
During the welding process, steel pipes may develop defects such as ovality, bending, or other shape irregularities. The expanding machine corrects these defects by applying uniform pressure, making the cross-section of the pipes more circular and thereby enhancing their overall quality and appearance.
3. Improvement of Mechanical Properties
During the expanding process, the inner and outer surfaces of the pipes are subjected to uniform stress, which helps eliminate residual stresses generated during welding and improves the mechanical properties of the pipes. For example, expanding can enhance the compressive and bending strength of the pipes, making them more suitable for use in high-stress environments.
4. Surface Quality Enhancement
The expanding machine can also polish the inner and outer surfaces of the pipes to some extent during the expanding process, removing burrs and oxide scales generated during welding. This improves the surface quality of the pipes, which is particularly important for applications requiring high surface quality, such as fluid or gas transportation.
5. Increased Production Efficiency
In the production line of used welded pipe machines, the use of an expanding machine can significantly improve production efficiency. Through automated or semi-automated expanding operations, manual intervention is reduced, production cycles are shortened, and production costs are lowered. Additionally, the high-precision operation of the expanding machine reduces the scrap rate, enhancing the overall efficiency of the production line.
6. Adaptability to Multiple Specifications
Expanding machines typically feature adjustable expanding ranges and pressure settings, allowing them to accommodate the production of pipes with different diameters and wall thicknesses. This flexibility enables used welded pipe machines to produce pipes of various specifications, meeting the diverse needs of customers.
7. Extended Equipment Lifespan
In used welded pipe machines, the use of an expanding machine can also extend the lifespan of other equipment. By correcting the shape and dimensions of the pipes, wear and damage to subsequent processing equipment are reduced, thereby prolonging the lifespan of the entire production line.
8. Environmental Protection and Energy Efficiency
Modern expanding machines often incorporate energy-saving designs and eco-friendly materials, reducing energy consumption and environmental pollution. In the production process of used welded pipe machines, the use of high-efficiency expanding machines not only lowers production costs but also aligns with the environmental requirements of modern industry.
Conclusion
The role of the expanding machine in used welded pipe machines cannot be overlooked. It not only improves the dimensional accuracy and shape quality of steel pipes but also enhances their mechanical properties, improves surface quality, boosts production efficiency, adapts to multiple specifications, extends equipment lifespan, and meets environmental and energy-saving requirements. Therefore, the expanding machine is an indispensable key piece of equipment in the production process of used welded pipe machines.
From the above analysis, it is clear that the expanding machine plays multiple roles and holds significant importance in used welded pipe machines. Whether from the perspective of product quality, production efficiency, or economic benefits, the expanding machine is a critical component.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
