Used Pipe Mill Supplier
Conduct training of slitting crew
- Sort：Information
- Auth:
- Source:
- Release time：2024-12-05 09:56
- Pvs：
【概要描述】Training a slitting crew usually includes the following key steps: 1.Theoretical Training: Equipment knowledge: Understand the basic components of the slitting unit and its working principle. Operation specifications: Familiar with the operation procedures, including starting, stopping, adjusting parameters, common problem handling, etc. Safety training: Understand the safety risks in equipment operation and corresponding preventive measures, and be familiar with emergency handling methods in emergency situations. 2.Practical operation: On-site operation demonstration: An experienced operator gives a demonstration on site to guide new employees to master basic operating skills. Hands-on practice: Let new employees operate the equipment themselves, accumulate experience in actual operation, and solve the problems encountered. 3.Maintenance: Daily inspection: Train employees to understand the contents and methods of daily inspection of equipment, including cleaning, lubrication, fastening and other work. Troubleshooting: Teach employees how to identify common equipment failures, understand basic troubleshooting methods and when professional maintenance personnel are required to intervene. 4.Efficiency optimization: Production Management: Explain how to rationally arrange production tasks to improve equipment utilization and production efficiency. Data Analysis: Teach employees how to record and analyze production data to find and improve the weak links in production. 5.Assessment and continuous improvement: Assessment: Evaluate the effectiveness of training through examinations or practical assessments to ensure that employees have the necessary knowledge and skills. Continuous improvement: Regularly organize training review and skill upgrading courses, and constantly improve the training content according to the actual production and equipment update. After the training, new employees can work under the supervision of an experienced operator until they are fully competent. For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Conduct training of slitting crew
【概要描述】Training a slitting crew usually includes the following key steps:
1.Theoretical Training:
Equipment knowledge: Understand the basic components of the slitting unit and its working principle.
Operation specifications: Familiar with the operation procedures, including starting, stopping, adjusting parameters, common problem handling, etc.
Safety training: Understand the safety risks in equipment operation and corresponding preventive measures, and be familiar with emergency handling methods in emergency situations.
2.Practical operation:
On-site operation demonstration: An experienced operator gives a demonstration on site to guide new employees to master basic operating skills.
Hands-on practice: Let new employees operate the equipment themselves, accumulate experience in actual operation, and solve the problems encountered.
3.Maintenance:
Daily inspection: Train employees to understand the contents and methods of daily inspection of equipment, including cleaning, lubrication, fastening and other work.
Troubleshooting: Teach employees how to identify common equipment failures, understand basic troubleshooting methods and when professional maintenance personnel are required to intervene.
4.Efficiency optimization:
Production Management: Explain how to rationally arrange production tasks to improve equipment utilization and production efficiency.
Data Analysis: Teach employees how to record and analyze production data to find and improve the weak links in production.
5.Assessment and continuous improvement:
Assessment: Evaluate the effectiveness of training through examinations or practical assessments to ensure that employees have the necessary knowledge and skills.
Continuous improvement: Regularly organize training review and skill upgrading courses, and constantly improve the training content according to the actual production and equipment update.
After the training, new employees can work under the supervision of an experienced operator until they are fully competent.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
- Sort：Information
- Auth:
- Source:
- Release time：2024-12-05 09:56
- Pvs：
Detail
Training a slitting crew usually includes the following key steps:
1.Theoretical Training:
Equipment knowledge: Understand the basic components of the slitting unit and its working principle.
Operation specifications: Familiar with the operation procedures, including starting, stopping, adjusting parameters, common problem handling, etc.
Safety training: Understand the safety risks in equipment operation and corresponding preventive measures, and be familiar with emergency handling methods in emergency situations.
2.Practical operation:
On-site operation demonstration: An experienced operator gives a demonstration on site to guide new employees to master basic operating skills.
Hands-on practice: Let new employees operate the equipment themselves, accumulate experience in actual operation, and solve the problems encountered.
3.Maintenance:
Daily inspection: Train employees to understand the contents and methods of daily inspection of equipment, including cleaning, lubrication, fastening and other work.
Troubleshooting: Teach employees how to identify common equipment failures, understand basic troubleshooting methods and when professional maintenance personnel are required to intervene.
4.Efficiency optimization:
Production Management: Explain how to rationally arrange production tasks to improve equipment utilization and production efficiency.
Data Analysis: Teach employees how to record and analyze production data to find and improve the weak links in production.
5.Assessment and continuous improvement:
Assessment: Evaluate the effectiveness of training through examinations or practical assessments to ensure that employees have the necessary knowledge and skills.
Continuous improvement: Regularly organize training review and skill upgrading courses, and constantly improve the training content according to the actual production and equipment update.
After the training, new employees can work under the supervision of an experienced operator until they are fully competent.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
关键词：
More News
The parameters of the used scraping and rolling machine
Time of issue : 2025-01-11
1.Model: The specific model will vary depending on the brand.
2.Scraping width: Maximum scraping width, usually between 600-3000mm.
3.Scraping length: Maximum scraping length, usually between 2000-8000mm.
4.Table size: according to the specifications of the machine.
5.Spindle speed: usually between hundreds to thousands of RPM, the specific value depends on the machine tool model.
6.Motor power: usually ranging from a few kilowatts to tens of kilowatts.
7.Number of tool holders: The number of tool holders of different models may be different.
8.Control system: Old machine tools may be equipped with traditional manual control systems, and may also be upgraded to numerical control systems.
9.Machine weight: several tons to dozens of tons.
10.Accuracy: Most scraping and rolling machine tools have high processing accuracy.
When buying used equipment, it is very important to understand the parameters of the specific model and the use of the equipment in detail. It is best to contact the seller, ask for detailed technical specifications and use records of the equipment, and carry out on-site inspection and testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Model: The specific model will vary depending on the brand.
2.Scraping width: Maximum scraping width, usually between 600-3000mm.
3.Scraping length: Maximum scraping length, usually between 2000-8000mm.
4.Table size: according to the specifications of the machine.
5.Spindle speed: usually between hundreds to thousands of RPM, the specific value depends on the machine tool model.
6.Motor power: usually ranging from a few kilowatts to tens of kilowatts.
7.Number of tool holders: The number of tool holders of different models may be different.
8.Control system: Old machine tools may be equipped with traditional manual control systems, and may also be upgraded to numerical control systems.
9.Machine weight: several tons to dozens of tons.
10.Accuracy: Most scraping and rolling machine tools have high processing accuracy.
When buying used equipment, it is very important to understand the parameters of the specific model and the use of the equipment in detail. It is best to contact the seller, ask for detailed technical specifications and use records of the equipment, and carry out on-site inspection and testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Parameters of used stainless steel pipe on-line bright annealing furnace
Time of issue : 2025-01-10
1.Specifications:
Pipe diameter range: Pipe diameter suitable for processing.
Wall thickness range: Wall thickness range of the pipe.
Processing speed: annealing furnace processing speed of stainless steel pipe.
2.Temperature control:
Maximum temperature: The maximum operating temperature is usually 1000°C to 1200°C.
Heating method: electric heating, gas heating or other heating method.
Temperature uniformity: Ensure uniform temperature distribution in all areas of the furnace.
3.Cooling method:
Air cooling: Use air for rapid cooling.
Water cooling: Use water to improve cooling efficiency.
4.Atmosphere control:
Type of protective gas: Commonly used hydrogen, nitrogen or ammonia decomposition gas.
Gas flow and pressure: Protect gas flow and pressure control.
5.Electrical parameters:
Voltage: Voltage range required for operation.
Power: Total power of the device.
6.Other parameters:
Furnace size: The specific size of the furnace determines the length and diameter of the pipe that can be processed.
Transportation mode: The transmission mode of the pipe in the furnace, such as chain transmission, roller table transmission, etc.
Control mode: manual control, CNC or PLC control system.
In order to ensure that the right used equipment is selected, it is recommended to actually look at the condition of the equipment, understand the age of the equipment and maintenance records, and it is best to consult a professional evaluation.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Specifications:
Pipe diameter range: Pipe diameter suitable for processing.
Wall thickness range: Wall thickness range of the pipe.
Processing speed: annealing furnace processing speed of stainless steel pipe.
2.Temperature control:
Maximum temperature: The maximum operating temperature is usually 1000°C to 1200°C.
Heating method: electric heating, gas heating or other heating method.
Temperature uniformity: Ensure uniform temperature distribution in all areas of the furnace.
3.Cooling method:
Air cooling: Use air for rapid cooling.
Water cooling: Use water to improve cooling efficiency.
4.Atmosphere control:
Type of protective gas: Commonly used hydrogen, nitrogen or ammonia decomposition gas.
Gas flow and pressure: Protect gas flow and pressure control.
5.Electrical parameters:
Voltage: Voltage range required for operation.
Power: Total power of the device.
6.Other parameters:
Furnace size: The specific size of the furnace determines the length and diameter of the pipe that can be processed.
Transportation mode: The transmission mode of the pipe in the furnace, such as chain transmission, roller table transmission, etc.
Control mode: manual control, CNC or PLC control system.
In order to ensure that the right used equipment is selected, it is recommended to actually look at the condition of the equipment, understand the age of the equipment and maintenance records, and it is best to consult a professional evaluation.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
When purchasing used automatic cold bending units without changing rollers
Time of issue : 2025-01-09
1.Equipment status: Check the overall condition of the equipment in detail, including whether there is wear, damage, rust and other conditions. Ask the seller about the age and maintenance history of the equipment.
2.Manufacturers and brands: Choose equipment from well-known brands or trusted manufacturers, which can ensure the quality and performance of the equipment. Look online for word-of-mouth and user reviews of the brand.
3.Model and parameters: Confirm whether the specific model and technical parameters of the required unit meet your production needs, such as the type, thickness and width of processing materials, and the molding speed of the equipment.
4.Functional test: try to carry out field tests before purchase to check the operation of the equipment to ensure the normal operation of all functions, including the degree of automation, roll change function, production efficiency, etc.
5.After-sales service: Understand the seller's after-sales service, whether to provide installation and commissioning, technical guidance and maintenance services. This can ensure that the problems during the operation of the equipment can be solved in time.
6.Reasonable price: Compare the price of similar equipment on the market to ensure that the purchase of equipment is reasonable. If the price is significantly lower than the market price, it is necessary to carefully judge the actual condition of the equipment.
7.Contracts and procedures: Ensure that the purchase procedures of equipment are complete, sign a formal purchase and sales contract, clarify the rights and obligations of both parties, and ensure that the equipment transfer procedures are legal and compliant.
Before making a final decision, consult and compare in many aspects to ensure that the second-hand automatic non-changing roll cold bending unit purchased can bring benefits to your production.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Equipment status: Check the overall condition of the equipment in detail, including whether there is wear, damage, rust and other conditions. Ask the seller about the age and maintenance history of the equipment.
2.Manufacturers and brands: Choose equipment from well-known brands or trusted manufacturers, which can ensure the quality and performance of the equipment. Look online for word-of-mouth and user reviews of the brand.
3.Model and parameters: Confirm whether the specific model and technical parameters of the required unit meet your production needs, such as the type, thickness and width of processing materials, and the molding speed of the equipment.
4.Functional test: try to carry out field tests before purchase to check the operation of the equipment to ensure the normal operation of all functions, including the degree of automation, roll change function, production efficiency, etc.
5.After-sales service: Understand the seller's after-sales service, whether to provide installation and commissioning, technical guidance and maintenance services. This can ensure that the problems during the operation of the equipment can be solved in time.
6.Reasonable price: Compare the price of similar equipment on the market to ensure that the purchase of equipment is reasonable. If the price is significantly lower than the market price, it is necessary to carefully judge the actual condition of the equipment.
7.Contracts and procedures: Ensure that the purchase procedures of equipment are complete, sign a formal purchase and sales contract, clarify the rights and obligations of both parties, and ensure that the equipment transfer procedures are legal and compliant.
Before making a final decision, consult and compare in many aspects to ensure that the second-hand automatic non-changing roll cold bending unit purchased can bring benefits to your production.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
When buying a used CNC steel plate cutting machine
Time of issue : 2025-01-08
1.Equipment condition: To check the overall condition of the equipment, including the mechanical part, the electrical part and the numerical control system, to ensure that it is operating normally, without obvious damage or wear.
2.Brand and model: Select well-known brands and mature models of equipment to ensure its quality and reliability. In addition, some brands may have better after-sales service and parts supply.
3.Production year and use time: Understand the production year and use time of the equipment, you can judge its remaining life. In general, devices that last a short time are likely to be more reliable.
4.Working accuracy and efficiency: Check whether the working accuracy and production efficiency of the equipment meet your requirements. It is recommended to ask the seller to provide the specific parameters and historical production data of the equipment.
5.Maintenance records: Understand the maintenance records of the equipment and confirm whether it is regularly maintained. If there is a detailed maintenance record, it means that the equipment has been better maintained and maintained.
6.Price comparison: Compare the old and new prices of the same type of equipment on the market to ensure that the second-hand equipment purchased is reasonable. At the same time, consider whether further repair or upgrade costs are required.
7.Trial run: If possible, carry out field trial run to ensure that the functions of the equipment work normally. Observe the operating noise, cutting speed, and cutting quality of the equipment.
8.Supplier reputation: Choose suppliers or sellers with good reputation. You can understand the reputation of suppliers by checking customer reviews and consulting friends in the same industry.
9.Transportation and installation: Understand the transportation and installation of the equipment to ensure that it will not be damaged during transportation and can be successfully installed in your production workshop.
10.After-sales service: Ask the seller whether to provide after-sales service, including installation and commissioning, training operators, providing technical support, etc., which is particularly important for used equipment.
By considering the above factors, you can better choose the second-hand CNC steel plate cutting machine that meets your needs.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
1.Equipment condition: To check the overall condition of the equipment, including the mechanical part, the electrical part and the numerical control system, to ensure that it is operating normally, without obvious damage or wear.
2.Brand and model: Select well-known brands and mature models of equipment to ensure its quality and reliability. In addition, some brands may have better after-sales service and parts supply.
3.Production year and use time: Understand the production year and use time of the equipment, you can judge its remaining life. In general, devices that last a short time are likely to be more reliable.
4.Working accuracy and efficiency: Check whether the working accuracy and production efficiency of the equipment meet your requirements. It is recommended to ask the seller to provide the specific parameters and historical production data of the equipment.
5.Maintenance records: Understand the maintenance records of the equipment and confirm whether it is regularly maintained. If there is a detailed maintenance record, it means that the equipment has been better maintained and maintained.
6.Price comparison: Compare the old and new prices of the same type of equipment on the market to ensure that the second-hand equipment purchased is reasonable. At the same time, consider whether further repair or upgrade costs are required.
7.Trial run: If possible, carry out field trial run to ensure that the functions of the equipment work normally. Observe the operating noise, cutting speed, and cutting quality of the equipment.
8.Supplier reputation: Choose suppliers or sellers with good reputation. You can understand the reputation of suppliers by checking customer reviews and consulting friends in the same industry.
9.Transportation and installation: Understand the transportation and installation of the equipment to ensure that it will not be damaged during transportation and can be successfully installed in your production workshop.
10.After-sales service: Ask the seller whether to provide after-sales service, including installation and commissioning, training operators, providing technical support, etc., which is particularly important for used equipment.
By considering the above factors, you can better choose the second-hand CNC steel plate cutting machine that meets your needs.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
底部留言
描述：
LINK
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Category brief summary:
Contact Us
Tel (wechat): 13336487288
Wechat：+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
