Common faults of used welded pipe mills production line forming machines (2)
- Sort:Information
- Auth:
- Source:
- Release time:2023-10-02 11:30
- Pvs:
【概要描述】Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.
Common faults of used welded pipe mills production line forming machines (2)
【概要描述】Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.
- Sort:Information
- Auth:
- Source:
- Release time:2023-10-02 11:30
- Pvs:
Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.
The deviation is also called turning over the belt. Due to various reasons, the deviation will occur at any time between the rolls of the forming machine. The specific performance is that after the tube blank comes out of the flat roll or vertical roll, the heights of the two edges are different. In severe cases, the tube blank will turn over and cannot enter the next pass smoothly, so it is forced to stop processing, which directly affects the production. Increase in work rate. However, there are two reasons for the deviation of the forming machine of the used welded pipe mills production line, that is, the deviation of the flat roll and the deviation of the vertical roll. We will introduce them in detail according to these two reasons.
1.2 Analysis of the causes of vertical roller deviation
(1) The heights of the two vertical rollers are different. When the heights of the two vertical rollers are different, it is easy to cause the tube blank to turn over in the hole pattern. A slight height difference can be verified by detecting the upper boss of the vertical roll with a steel ruler, and in serious cases, it can be obtained by directly touching it with a finger.
(2) The bearing is damaged. When the vertical roller bearing is damaged, it is easy to cause the tube blank to deviate. After the bearing is damaged, the vertical roll pass cannot control the stable operation of the tube blank well, and also destroy the height position of the two vertical rolls. When the upper end bearing of the vertical roller is damaged, the tube blank will be turned up to the side of the hole pattern with the damaged bearing; when the lower end bearing of the vertical roller is damaged, the tube blank will be turned up to the side of the hole pattern with the intact bearing, and the bearing should also be considered. severity of damage.
(3) The front flat roller is not straight. At the flat roll before the vertical roll, the tube blank already has the phenomenon of deviation, which is mainly because the center of the flat roll is not correct. When the center deviation is small, the tube blank can barely enter the vertical roller hole, but if the vertical roller is slightly inappropriate in some aspects, and the center of the flat roll deviates greatly, the tube blank will be deviated and turned over. , so the flat roll pass must be adjusted to the center position. If the center of the flat roll is only slightly out of alignment, good results can also be obtained by adjusting the pressure of the flat roll.
(4) The size of the vertical rollers is different. When replacing the vertical rollers, it must be noted that the outer diameters of the two vertical rollers should be the same. At the center of the shape, the tube blank will shift to the side with the smaller roll diameter and turn up to the side with the larger roll diameter. In the production of thick-walled pipes with larger diameters, the phenomenon of deviation is not obvious, but when producing thin-walled tubes, deviations may occur. Moreover, the thinner the tube wall, the larger the error of the roll diameter, and the deviation The problem becomes more serious.
(5) The center of the vertical roller is not correct. When the deviation of the center position of the vertical roller is small, the deviation of the tube blank is not easy to occur, and the operation of the tube blank is relatively stable. Generally, the deviation of the flat roll can only be aggravated. Only when the center deviation is large, the deviation problem will be clearly exposed.
(6) The vertical roller moves axially. The slight axial movement of the vertical roller will generally not cause the tube blank to deviate, especially for ordinary thick-walled tubes. It is easy to occur only when producing small-diameter thin-walled tubes, because the rigidity of the tube blank is poor, and it is easy to be controlled by the swinging hole pattern and cause deviation. If the axial movement of the vertical roller is large, the probability of deviation will increase.
The reasons for the deviation of the common faults of the forming machine of the used welded pipe mills production line mainly include the deviation of the flat roll and the deviation of the vertical roll. Today, we will first introduce the analysis of the reasons for the deviation of the vertical roll: ① The heights of the two vertical rolls are different. ②The bearing is damaged. ③ The front flat roller is not correct. ④The size of vertical rollers is different. ⑤ The center of the vertical roller is not correct. ⑥The vertical roller moves axially.
More News

Time of issue : 2025-02-11
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1. The characteristics of high-precision steel pipe
High dimensional accuracy: small outer diameter, wall thickness tolerance (usually up to ±0.05mm), low ellipticity.
Excellent surface quality: smooth weld without burrs, surface finish Ra≤0.8μm.
Stable mechanical properties: weld strength close to the base material, uniform compressive/tensile properties.
Applicable materials: stainless steel (304/316L), carbon steel, alloy steel (such as API series), etc.
2. Core production process
(1) Type of pipe welding machine
High-frequency welding (HFW) : high efficiency, suitable for medium thin wall pipe (Φ10~Φ600mm), need to cooperate with precision forming unit.
Laser welding: small heat affected zone, narrow weld (0.1~0.3mm), suitable for ultra-thin walls (such as 0.3mm) or special alloys.
TIG welding: For high alloy steel or thick wall pipe, higher weld purity.
(2) Key process links
Forming process: multi-roll continuous cold forming, dynamic adjustment of roll parameters to compensate for rebound.
Welding control:
High frequency welding: precise control of current frequency (100~400kHz) and extrusion amount.
Laser welding: focus position accuracy ±0.05mm, real-time depth monitoring (such as CCD vision).
Online detection:
Eddy current inspection (ET) : Detection of surface cracks.
Ultrasonic inspection (UT) : detection of internal defects (sensitivity Φ0.5mm equivalent flat hole).
Laser caliper: Outer diameter closed loop control (accuracy ±0.01mm).
3. Post-processing technology
Heat treatment: bright annealing (hydrogen nitrogen protection atmosphere) to eliminate stress, hardness fluctuation ≤3HRC.
Straightening: multi-roll precision straightening, straightness ≤0.5mm/m.
Surface treatment:
Electrolytic polishing (EP) : For medical/food grade stainless steel tubes, Ra up to 0.2μm.
Coating: hot dip galvanizing (zinc layer ≥80μm) or electroless nickel plating (uniform thickness ±2μm).
4. Typical application areas
Automobile manufacturing: fuel injection pipe (tolerance ±0.03mm), hydraulic pipe.
Semiconductor equipment: Ultra-high clean gas delivery pipe (inner wall EP treatment, particle ≤Class 5).
Medical instruments: endoscopic catheter (Φ1~5mm, wall thickness 0.1mm).
Energy industry: Instrument tubes for nuclear power plants (SA213-TP347H material, intergranular corrosion test passed).
5. Quality control standards
International standard:
ASTM A269 (Universal Seamless and Welded Austenitic Stainless Steel Pipe)
EN 10305-4 (Precision welded pipes for hydraulic systems)
Industry certification: ISO 9001, PED 2014/68/EU (Pressure Equipment Directive).
6. Technological trends
Intelligent production: AI algorithm optimizes welding parameters, and the yield is increased to more than 99.5%.
Composite process: laser + arc composite welding, both efficiency and quality (speed increased by 30%).
Green manufacturing: low energy high frequency power supply (efficiency ≥90%), waste acid recovery ≥95%.
Through the above process optimization and strict quality control, the high-precision steel pipe produced by the pipe welding machine can meet the demanding requirements of size, performance and reliability in high-end industrial fields. In actual production, the process route needs to be customized according to the material characteristics and uses, for example, medical tubes need to undergo additional passivation treatment and biocompatibility testing.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-02-08
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1.The role of pipe welding machine in the manufacture of automobile frame
Pipe production: The welding pipe machine is used to manufacture high-precision welded steel pipes, which constitute the longitudinal beams, beams, anti-collision beams and other key components of the automobile frame. High frequency welding (HFW) or laser welding technology can produce steel pipes with uniform wall thickness and strength of more than 800MPa to meet the needs of lightweight.
Customized processing: Through flexible forming technology, the welding machine can produce special-shaped cross section pipes (such as rectangular, trapezoidal), adapt to the topology optimization design of different models of frames, improve space utilization and impact energy absorption efficiency.
2.The core requirements of the welding pipe process for automobile frames
Material properties: DP600/DP800 duplex steel or 22MnB5 thermoforming steel should be used, and online heat treatment (such as induction annealing) should be carried out after welding to ensure the microstructure consistency between the weld zone and the base material and avoid HAZ (heat affected zone) softening.
Dimensional accuracy: Diameter tolerance should be controlled within ±0.2mm, ellipticity ≤0.5%, to ensure the matching accuracy of the assembly and stamping parts (clearance <0.5mm).
3.Key technology breakthrough point
Laser-MAG composite welding: the penetration depth can reach 8mm, the welding speed is increased to 6m/min, the heat input is reduced by 30%, and the welding deformation of the frame is significantly reduced (≤1.5mm/m).
Online quality monitoring: high-speed CCD vision system (sampling rate 2000fps) with eddy current detection, to achieve real-time detection of weld defects, miss rate <0.01%.
4.Cost-performance balance
Compared with the stamping and welding structure, the welded pipe frame can reduce the weight by 15-20%, the material utilization rate is increased to 95%, and the manufacturing cost of the bicycle is reduced by about 1200 yuan. However, it is necessary to increase the investment in roller forming molds (about 2 million yuan/set).
5.Industry Application Cases
- An independent brand pure level station adopts 3D variable cross-section welded pipe subframe, with torsional rigidity increased to 27000Nm/°, 40% higher than the traditional structure, and the battery pack space utilization increased by 12%.
Conclusion
The penetration rate of welded pipe technology in the field of automotive frames is growing at a rate of 8% per year, and future development directions include:
Intelligent welded pipe system (digital twin model real-time control molding parameters)
Magnesium alloy /CFRP composite pipe welding process
Topological optimization driven continuous forming technology for variable thickness pipes
It is recommended to pay attention to the update of the ISO 15614 standard and the latest certification requirements for automotive welded pipe processes in ASME BPVC Section IX to ensure technical compliance.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-02-07
89 The working principle of the pipe welding machine 89 The pipe welding machine uncoils the steel strip, feeds and welds it into a round steel pipe, and then cools, straightens and cuts the steel pipe to the required length. The main steps include:
1. Uncoiling: Unroll the steel strip from the drum and level it through the straightener.
2. Forming: The steel strip is rolled into a tube shape through a series of roller wheels.
3. Welding: high frequency current is used to heat the joint of the steel strip, so as to weld the steel pipe.
4. Cooling: The welded steel pipe is cooled by cooling equipment.
5. Straightening and cutting: Finally, straighten and cut the steel pipe to the required length.
The main steel pipe used in the highway fence needs to have a certain strength and impact resistance, but also corrosion resistance. Specific features include:
1. High strength: the steel pipe must be able to withstand the impact to ensure the safety of the highway.
2. Corrosion resistance: steel pipes are usually galvanized to enhance their corrosion resistance and adapt to harsh outdoor environments.
3. Standard size: The steel pipe produced generally has strict size requirements to ensure the stability of the fixed connection of each fence.
The steel pipe produced by the 89 pipe welding machine plays a skeleton role in the highway fence, and its application is reflected in:
1. Guardrail: installed on both sides of the highway or in the middle, to prevent the vehicle from losing control of the road, to protect the safety of the driver.
2. Isolation belt: Set isolation belts between lanes in different directions to prevent vehicles from crossing lanes and reduce the incidence of accidents.
3. Sound barrier: The use of steel pipe frame to support the sound barrier plate to reduce the impact of road noise on the surrounding environment.
In short, the 89 pipe welding machine plays a key role in the production of steel pipes for highway fences, ensuring the stability, durability and safety of the fences, thus providing a reliable guarantee for the safe operation of the highways.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
89 The working principle of the pipe welding machine 89 The pipe welding machine uncoils the steel strip, feeds and welds it into a round steel pipe, and then cools, straightens and cuts the steel pipe to the required length. The main steps include:
1. Uncoiling: Unroll the steel strip from the drum and level it through the straightener.
2. Forming: The steel strip is rolled into a tube shape through a series of roller wheels.
3. Welding: high frequency current is used to heat the joint of the steel strip, so as to weld the steel pipe.
4. Cooling: The welded steel pipe is cooled by cooling equipment.
5. Straightening and cutting: Finally, straighten and cut the steel pipe to the required length.
The main steel pipe used in the highway fence needs to have a certain strength and impact resistance, but also corrosion resistance. Specific features include:
1. High strength: the steel pipe must be able to withstand the impact to ensure the safety of the highway.
2. Corrosion resistance: steel pipes are usually galvanized to enhance their corrosion resistance and adapt to harsh outdoor environments.
3. Standard size: The steel pipe produced generally has strict size requirements to ensure the stability of the fixed connection of each fence.
The steel pipe produced by the 89 pipe welding machine plays a skeleton role in the highway fence, and its application is reflected in:
1. Guardrail: installed on both sides of the highway or in the middle, to prevent the vehicle from losing control of the road, to protect the safety of the driver.
2. Isolation belt: Set isolation belts between lanes in different directions to prevent vehicles from crossing lanes and reduce the incidence of accidents.
3. Sound barrier: The use of steel pipe frame to support the sound barrier plate to reduce the impact of road noise on the surrounding environment.
In short, the 89 pipe welding machine plays a key role in the production of steel pipes for highway fences, ensuring the stability, durability and safety of the fences, thus providing a reliable guarantee for the safe operation of the highways.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill

Time of issue : 2025-01-23
1.Supply channels:
Online marketplaces: For example, Taobao, Alibaba, Jingdong and other platforms can search and find used equipment.
Professional used equipment market: Some areas have a special used equipment market, you can view the equipment situation on the spot.
Industry exhibitions: Participate in machinery, manufacturing related exhibitions, sometimes you can find suppliers to provide second-hand equipment opportunities.
Peers and recommendations: Ask peers and friends in the industry to obtain reliable equipment and supplier information.
2.Selection criteria:
Equipment condition: Carefully check the service life, maintenance records and running status of the equipment to ensure that the function is intact.
Brand and model: Choose well-known brands and reliable models, usually the quality is guaranteed, and the after-sales service is relatively perfect.
Price comparison: multiple inquiries to ensure reasonable prices to avoid buying inferior equipment at low prices.
Service and Accessories: Find out if the supplier provides after-sales service and accessories to ensure convenient maintenance in subsequent use.
3.Site inspection:
Equipment operation demonstration: The seller is required to perform equipment operation demonstration to observe the actual operation.
Technical Support: Evaluate the seller's technical support capabilities, including whether to provide installation and commissioning services.
Contract protection: Sign a detailed procurement contract to clarify the responsibilities of both parties, equipment specifications, payment methods, after-sales service and other content.
4.Trial Period:
Trial commitment: Try to strive for a certain trial period in order to find potential problems with the equipment during use.
Troubleshooting: During the trial period, pay close attention to the operation of the equipment, if there is a failure, contact the seller as soon as possible.
Through the above methods, you can better purchase a satisfactory second-hand pipe making machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
1.Supply channels:
Online marketplaces: For example, Taobao, Alibaba, Jingdong and other platforms can search and find used equipment.
Professional used equipment market: Some areas have a special used equipment market, you can view the equipment situation on the spot.
Industry exhibitions: Participate in machinery, manufacturing related exhibitions, sometimes you can find suppliers to provide second-hand equipment opportunities.
Peers and recommendations: Ask peers and friends in the industry to obtain reliable equipment and supplier information.
2.Selection criteria:
Equipment condition: Carefully check the service life, maintenance records and running status of the equipment to ensure that the function is intact.
Brand and model: Choose well-known brands and reliable models, usually the quality is guaranteed, and the after-sales service is relatively perfect.
Price comparison: multiple inquiries to ensure reasonable prices to avoid buying inferior equipment at low prices.
Service and Accessories: Find out if the supplier provides after-sales service and accessories to ensure convenient maintenance in subsequent use.
3.Site inspection:
Equipment operation demonstration: The seller is required to perform equipment operation demonstration to observe the actual operation.
Technical Support: Evaluate the seller's technical support capabilities, including whether to provide installation and commissioning services.
Contract protection: Sign a detailed procurement contract to clarify the responsibilities of both parties, equipment specifications, payment methods, after-sales service and other content.
4.Trial Period:
Trial commitment: Try to strive for a certain trial period in order to find potential problems with the equipment during use.
Troubleshooting: During the trial period, pay close attention to the operation of the equipment, if there is a failure, contact the seller as soon as possible.
Through the above methods, you can better purchase a satisfactory second-hand pipe making machine.
For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier:www.usedpipemill.com
JinYuJie-Used Pipe Mills Supplier(Please click the link→) :second-hand pipe mill
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province
Recommendation
Online Inquiry
LINK
Contact Us
Tel (wechat): 13336487288
Wechat:+86 13336487288
WhatsApp:+86 13336487288
Email: zty@usedpipemill.com
Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province
