• Sort：Information
• Auth:
• Source:
• Release time：2024-12-30 09:01
• Pvs：

【概要描述】Operating a used baler requires following a series of safety and maintenance codes to ensure proper operation of the equipment and the safety of the operator. Here are some basic rules of practice: 1.Check the device status: Check that the power supply and wires are intact. Check all hydraulic pipes and gas pipes for leakage or damage. Make sure the fuselage has no loose or worn parts. 2.Cleaning equipment: Remove debris around the equipment and keep the working environment clean. Remove dust and foreign matter from the workbench surface. 3.Tools: Prepare the necessary tools and materials, such as ropes, bags, baseboards, etc. During operation 1.Loading materials: Load materials in the prescribed order to avoid equipment damage due to overload. Ensure material is placed smoothly to prevent tipping or slipping. 2.Start the device: Ensure all safety devices are in working order. Start the device according to the operation manual, observe the operating status of the device, and stop the device in time if there is an exception. 3.Operating Details: During operation, keep a safe distance from the machine to avoid being squeezed or hurt by the machine. Do not open the protective cover of the equipment or perform other dangerous operations without authorization. 4.Load packing: Select the appropriate packing method according to the material type, and adjust the packing parameters manually or automatically. During the packing process, ensure that the tape is tight and secure. Clean up after operation 1.Turn off the device: Turn off the equipment step by step and cut off the power supply according to the order in the operation manual. Remove debris from work surfaces and around equipment. 2. Daily inspection: Conduct daily inspection of the equipment, record the usage and failure conditions. Timely maintenance and repair for problems found. 3. Lubrication and maintenance: Lubricate and maintain the equipment regularly to extend the service life of the equipment. Safety precautions Operators must receive equipment operation training and strictly follow safe operation procedures. In case of emergency, press the emergency stop button immediately and alert others. Do not modify the equipment or remove the safety device without authorization. Compliance with the above code of practice can effectively ensure the normal operation of the second-hand stacking baler and the safety of the staff. For other problems, refer to the operation manual of the device or contact the technical support of the manufacturer. For more information, please pay attention to the website of Jinyujie Mechanical and Electrical Used Pipe Mill Supplier：www.usedpipemill.com JinYuJie-Used Pipe Mills Supplier（Please click the link→) :second-hand pipe mill