China used pipe welding machines often consider many key technologies when producing precision welded pipes, such as ① quality requirements for raw materials, ② welded pipe forming process, ③ formation and removal of weld burrs, ④ weld heat treatment, ⑤ non-destructive testing, ⑥ correct Equipment requirements for welded pipe unit. For this reason, we introduce the ⑥ correct Equipment requirements for welded pipe unit to be considered in the production of precision welded pipes.

Precision welded pipes are more accurate in geometric dimensions than general welded pipes. The welds and inner and outer surfaces are of good quality, and the wall thickness is uniform. It can be used in equipment components directly or with a small amount of processing. It is widely used in chemical, textile machinery, aviation, instrumentation, automotive and other sectors. 

Manufacture of precision welded steel pipes has the characteristics of more precise geometric dimensions than general welded steel pipes, good quality of welds and internal and external surfaces, and uniform wall thickness. Therefore, in the production of precision welded steel pipes, there are the following requirements for the selection of China used pipe welding machines and their supporting equipment:

1. High-rigidity and high-strength forming and sizing frame: In order to reduce the strong plastic deformation of the welded pipe unit during maximum load operation, the total accumulated error and elastic deformation of each frame are reduced, so as to improve the dimensional accuracy of precision welded pipes . Therefore, it is necessary to improve the rigidity, strength and machining accuracy of the frame, flat roller shaft, bearing seat, press-up and press-up machinery. When selecting the China used pipe welding machines, it is necessary to choose a heavy-duty configuration welded pipe unit and its supporting facilities.

2. Increase the molding machine base 2~3: In order to reduce the elastic deformation, the processing pass should be increased accordingly. Generally, the forming and deformation processing passes of the precision welded pipe unit are increased by 2 to 3 passes than the ordinary welded pipe unit, so the forming machine base needs to be increased by 2 to 3 bases.

3. In order to ensure the uniformity of the rolling centerline (vertical centerline) of each stand, the base shaft should be made in the center, and the positioning dimensions on both sides and the middle sleeve should be accurate. The crew must have precise positioning benchmarks. At the position of the horizontal line, an uphill line (downhill line) or a straight line should be formed in accordance with the process requirements to ensure that no curve fluctuations occur. Therefore, the machine base needs to be equipped with pressing and pressing machinery for easy adjustment.

4. The roll mold has high requirements for strength, toughness, wear resistance, surface finish, dimensional accuracy, hardness, etc., and the hardness must be uniform.

5. China used pipe welding machines should be equipped with lubricant circulation devices to cool and lubricate the rolls to reduce the surface stress on the roll deformed steel strip, prevent surface scratches, and reduce micro-cracks.

Part of the content of this site comes from the Internet. This site only provides information storage. The copyright belongs to the original author. It does not bear the relevant legal responsibility and does not represent the views and positions of this site. Please contact and delete it if there is any infringement.