MENU

/
/
Common faults of used welded pipe mills production line forming machines (2)

Common faults of used welded pipe mills production line forming machines (2)

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2022-02-23 11:30
  • Pvs:

【概要描述】Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.

Common faults of used welded pipe mills production line forming machines (2)

【概要描述】Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2022-02-23 11:30
  • Pvs:
Detail

Common faults of used welded pipe mills production line forming machines can be divided into ① deviation ② scratches ③ "indenter" phenomenon ④ "drill belt" phenomenon. In order to let everyone understand the common faults of the molding machine in detail, we will introduce ① deviation.

 

The deviation is also called turning over the belt. Due to various reasons, the deviation will occur at any time between the rolls of the forming machine. The specific performance is that after the tube blank comes out of the flat roll or vertical roll, the heights of the two edges are different. In severe cases, the tube blank will turn over and cannot enter the next pass smoothly, so it is forced to stop processing, which directly affects the production. Increase in work rate. However, there are two reasons for the deviation of the forming machine of the used welded pipe mills production line, that is, the deviation of the flat roll and the deviation of the vertical roll. We will introduce them in detail according to these two reasons.

 

1.2 Analysis of the causes of vertical roller deviation

(1) The heights of the two vertical rollers are different. When the heights of the two vertical rollers are different, it is easy to cause the tube blank to turn over in the hole pattern. A slight height difference can be verified by detecting the upper boss of the vertical roll with a steel ruler, and in serious cases, it can be obtained by directly touching it with a finger.

 

Used welded pipe mills production line

 

(2)The bearing is damaged.When the vertical roller bearing is damaged, it is easy to cause the tube blank to deviate. After the bearing is damaged, the vertical roll pass cannot control the stable operation of the tube blank well, and also destroy the height position of the two vertical rolls. When the upper end bearing of the vertical roller is damaged, the tube blank will be turned up to the side of the hole pattern with the damaged bearing; when the lower end bearing of the vertical roller is damaged, the tube blank will be turned up to the side of the hole pattern with the intact bearing, and the bearing should also be considered. severity of damage.

 

(3) The front flat roller is not straight.At the flat roll before the vertical roll, the tube blank already has the phenomenon of deviation, which is mainly because the center of the flat roll is not correct. When the center deviation is small, the tube blank can barely enter the vertical roller hole, but if the vertical roller is slightly inappropriate in some aspects, and the center of the flat roll deviates greatly, the tube blank will be deviated and turned over. , so the flat roll pass must be adjusted to the center position. If the center of the flat roll is only slightly out of alignment, good results can also be obtained by adjusting the pressure of the flat roll.

 

Used welded pipe mills production line

 

(4) The size of the vertical rollers is different. When replacing the vertical rollers, it must be noted that the outer diameters of the two vertical rollers should be the same. At the center of the shape, the tube blank will shift to the side with the smaller roll diameter and turn up to the side with the larger roll diameter. In the production of thick-walled pipes with larger diameters, the phenomenon of deviation is not obvious, but when producing thin-walled tubes, deviations may occur. Moreover, the thinner the tube wall, the larger the error of the roll diameter, and the deviation The problem becomes more serious.

 

(5)The center of the vertical roller is not correct. When the deviation of the center position of the vertical roller is small, the deviation of the tube blank is not easy to occur, and the operation of the tube blank is relatively stable. Generally, the deviation of the flat roll can only be aggravated. Only when the center deviation is large, the deviation problem will be clearly exposed.

 

(6)The vertical roller moves axially. The slight axial movement of the vertical roller will generally not cause the tube blank to deviate, especially for ordinary thick-walled tubes. It is easy to occur only when producing small-diameter thin-walled tubes, because the rigidity of the tube blank is poor, and it is easy to be controlled by the swinging hole pattern and cause deviation. If the axial movement of the vertical roller is large, the probability of deviation will increase.

 

The reasons for the deviation of the common faults of the forming machine of the used welded pipe mills production line mainly include the deviation of the flat roll and the deviation of the vertical roll. Today, we will first introduce the analysis of the reasons for the deviation of the vertical roll: ① The heights of the two vertical rolls are different. ②The bearing is damaged. ③ The front flat roller is not correct. ④The size of vertical rollers is different. ⑤ The center of the vertical roller is not correct. ⑥The vertical roller moves axially.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn