MENU

/
/
Used ERW tube mills, formation and removal of burrs in welded pipes

Used ERW tube mills, formation and removal of burrs in welded pipes

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2022-01-01 11:30
  • Pvs:

【概要描述】When the used ERW tube mills is used to manufacture welded pipes, internal burrs will occur. Once the internal burrs are not removed in time, the manufacturing quality of the welded pipes will be affected. Therefore, we must clearly understand the formation and removal of burrs in the welded pipe of the used ERW tube mills.

Used ERW tube mills, formation and removal of burrs in welded pipes

【概要描述】When the used ERW tube mills is used to manufacture welded pipes, internal burrs will occur. Once the internal burrs are not removed in time, the manufacturing quality of the welded pipes will be affected. Therefore, we must clearly understand the formation and removal of burrs in the welded pipe of the used ERW tube mills.

  • Sort:Information
  • Auth:
  • Source:
  • Release time:2022-01-01 11:30
  • Pvs:
Detail

When the used ERW tube mills is used to manufacture welded pipes, internal burrs will occur. Once the internal burrs are not removed in time, the manufacturing quality of the welded pipes will be affected. Therefore, we must clearly understand the formation and removal of burrs in the welded pipe of the used ERW tube mills.

 

The internal burr removal of the used ERW tube mills is a necessary process for the production of high-quality, high-value-added straight seam resistance welded pipes. Welded pipes for oil, natural gas, chemical industry, coal water slurry, and precision high-strength structures (such as oil cylinders and cylinder pipes) ), plastic-lined steel-plastic composite pipes are required to remove internal burrs, but the removal process of internal burrs is a complicated process. Many factors in the actual production process will affect the quality of internal burr removal. In order to obtain an ERW welded pipe with high internal burr removal quality, it is necessary to analyze the common problems in the internal burr removal process and propose solutions to the main problems. So as to ensure the accuracy of internal burr removal and the stability during the removal process.

 

Used ERW tube mills

 

Formation and removal of internal burrs

Used ERW tube mills to produce ERW welded pipe. The edges of the tube blank after forming the ERW welded pipe are quickly heated to the molten and semi-melted state under the proximity effect of the high-frequency current, and the partially molten metal is squeezed out when entering the squeeze roll , Burrs are formed on the inner and outer surfaces of the welded pipe.

The metal melt entering the inner wall of the ERW welded pipe forms the inner burr of the welded pipe weld; the burr that is squeezed out of the outer weld is called the outer burr. Because the internal burr and removal equipment is in the pipe, the removal is relatively difficult, which has become one of the major technical problems in the production of ERW welded pipes.

 

Used ERW tube mills

 

Part of the content of this site comes from the Internet. This site only provides information storage. The copyright belongs to the original author. It does not bear the relevant legal responsibility and does not represent the views and positions of this site. Please contact and delete it if there is any infringement.

关键词:

More News

Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
Factors and various influences to ensure the quality of used high frequency welded pipe machine welded pipe products(1)
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Detail
In the process of producing welded pipes with used high frequency welded pipe machine, how to ensure that the product quality meets the requirements of technical standards and the needs of customers, it is necessary to analyze the factors affecting product quality in the production process of steel pipes.
Improving lubricating effect of flying saw on used welded pipe equipment
Improving lubricating effect of flying saw on used welded pipe equipment
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Detail
Through the technical improvement of the used welded pipe equipment, the lubrication of the gear and rack of the flying saw has been effectively improved, and the specific performance is as follows:
Why does the used roll forming machine flying saw saw lack of lubrication?
Why does the used roll forming machine flying saw saw lack of lubrication?
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Detail
When the used roll forming machine produces steel pipes, the pipe fittings move at a constant speed according to the set speed, and the saw car is stationary relative to the unit before the sawing process. When the steel pipe reaches the set length, the clamping device of the saw car clamps the steel pipe, and the drive mechanism drives the saw car to move with the steel pipe and perform the sawing process until the sawing operation is completed. When the sawing process of the flying saw is completed, the driving device drives the saw carriage to return to the initial position. The reciprocating motion of the saw car is realized by the relative movement of the rack at the bottom of the saw car and the gear fixedly installed on the machine bed system.
Weld quality failure caused by used welded pipe machines (9)
Weld quality failure caused by used welded pipe machines (9)
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Detail
When manufacturing welded pipes for used welded pipe machines, judging that the quality of the welded pipes meets the standard depends on the quality of the welds. Therefore, the quality of the weld is very important, so sometimes it is necessary to rule out the quality of the weld. We perform analyses to understand weld quality failures.
Contact information
Tel: +86-13392281699
Wechat: 13392281699
Email: zty@usedpipemill.com
Company address:No. A99, East Lecong Avenue, Lecong Town, Foshan City, Guangdong Province

Recommendation

Online Inquiry

留言应用名称:
底部留言
描述:

LINK

Contact Us

Tel (wechat): 13336487288
Wechat:+86 13336487288

WhatsApp:+86 13336487288
Email: zty@usedpipemill.com

Address: No. A99, Lecong Avenue East, Lecong Town, Foshan City, Guangdong Province

QRCODE

Copyright 0 2021 jinyujie. 粤ICP备13051810号 Powerby:  300.cn